525 research outputs found
A hostile world for nonhuman animals : human identification and the oppression of nonhuman animals for human good
Exploring the Consistency of Data Collected in Archaeological Geophysics: A Case Study from the Iron Age Hillfort of Villasviejas del Tamuja (Extremadura, Spain)
Different geophysical methods applied at the settlement of Villasviejas del Tamuja (Botija, Spain) have identified robust anomalies located at the same position, but some anomalies are reflected by only one method. Furthermore, analysing the spatial correlation of these anomalies is of fundamental importance for obtaining a correct archaeological interpretation. In this work, we analysed the main results of electrical resistivity tomography (ERT), ground-penetrating radar (GPR) and magnetic gradiometry methods in a particular area of the archaeological site. In this analysis, we performed graphical and numerical spatial correlation analyses of the anomalies and observed strong agreement among the results provided by each method. Certain anomalies were reflected only in the magnetic and ERT studies. The results highlight the importance of applying several geophysical methods and performing spatial correlational analyses. Furthermore, the methodology that we have applied to evaluate the spatial correlation offers interesting results
Visualization of Solution Sets from Automated Docking of Molecular Structures
Aligning structures, often referred to as docking or registration, is frequently required in fields such as computer science, robotics and structural biology. The task of aligning the structures is usually automated, but due to noise and imprecision, the user often needs to evaluate the results before a final decision can be made. The solutions involved are of a multidimensional nature and normally densely populated. Therefore, some form of visualization is necessary, especially if users want to achieve higher level understanding, such as solution symmetry or clustering, from the data. We have developed a system that provides two views of the data. One view places focus on the orientation of the solutions and the other focuses on translations. Solutions within the views are crosslinked using various visual cues. Users are also able to apply various filters, intelligently reducing the solution set. We applied the visualization to data generated by the automated cryo-EM process of docking molecular structures into electron density maps. Current systems in this field only allow for visual representation of a single solution or a numerical list of the data. We evaluated the system through a multi-phase user study and found that the users were able to gain a better high-level understanding of the data, even in cases of relatively small solution sets
Estimated phosphorous requirement with and without added phytase of starting broiler chicks
For poultry the availability of phosphorus from ingredients of plant origin is limited, because this element is bound to phytates, and birds do not produce the enzyme phytase. Thus, it is necessary to complement their diets with inorganic P. Recently, microbial phytase has been utilized to improve the availability of P from phytates. Two experiments were conducted to calculate the optimal biological level of available P (Pa) with and without phytase, and to evaluate the effect of phytase on body weight gain (WG) and ash content of the tibia (% ASH) of broilers from 1-21 days of age. In Expt. 1 seven levels of Pa were evaluate: 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, and 0.60%; in Expt. 2, four levels of Pa 0.15, 0.27, 0.39, and 0.51%, and four levels of phytase 0, 200, 400, and 600 FTU (units of phytase/kg of diet) were evaluated in a factorial arrangement. In Expt. 1 there were differences (P<.05) in WG and % ASH with the levels of 0.45 and 0.50% Pa being the best. The optimal biological level was 0.46% for WG, similar to the 0.45% proposed by NRC (1994); and 0.49% for%ASH. In Exp. 2 the effect of phytase level onWGand%ASH, followed a linear tendency, the 600 FTU level surpassing the 0 FTU level by 13.5% forWGand 8.5 for%ASH (P<.05). The optimal biological level (P<.05) of Pa forWGwas estimated as 0.47 with 0 FTU and 0.394% with 600 FTU, and for%ASH as 0.47% with 0 FTU and 0.43% with 600 FTU. For maximum WG it is possible to reduce the inorganic P level by 0.75 g/kg diet (0.075%) when supplementing with 600 FTU)
Efficacy and Tolerability of 6-Month Treatment with Tamsulosin Plus the Hexanic Extract of Serenoa repens versus Tamsulosin Plus 5-Alpha-Reductase Inhibitors for Moderate-to-Severe LUTS-BPH Patients: Results of a Paired Matched Clinical Study
The objective of this subset analysis was to evaluate and compare the efficacy and tolerability of two combination treatments for men with moderate-to-severe lower urinary tract symptoms associated with benign prostatic hyperplasia (LUTS/BPH). Data were from a real-world, open-label, prospective, and multicenter study performed in outpatient urology clinics. Men with moderate-to-severe LUTS/BPH received 6-month treatment with tamsulosin (TAM) in combination with either the hexanic extract of S. repens (HESr) or a 5-alpha-reductase inhibitor (5ARI). Changes in urinary symptoms and quality of life were measured using the IPSS and BII questionnaires, respectively. Treatment tolerability was assessed by recording adverse effects (AEs). Patients in the two study groups were matched using iterative and propensity score matching approaches. After iterative matching, data were available from 136 patients (n = 68 treated with TAM + 5ARI, n = 68 with TAM + HESr). After 6 months of treatment, mean (SD) IPSS total score improved by 7.7 (6.3) and 6.7 (5.0) points in the TAM + 5ARI and TAM + HESr groups, respectively (p = 0.272); mean BII total scores improved by 3.1 (2.9) and 2.9 (2.4) points (p = 0.751), respectively. AEs were reported by 26.5% and 10.3% of patients in the same groups, mostly affecting sexual function (p < 0.027). When used in a real-world setting to treat patients with moderate-severe LUTS/BPH, 6-month treatment with TAM + HESr was as effective as TAM + 5ARI, but with better tolerability. © 2022 by the authors. Licensee MDPI, Basel, Switzerland
Role of stem cell transplant in CD30+ PTCL following frontline brentuximab vedotin plus CHP or CHOP in ECHELON-2
Peripheral T-cell lymphomas (PTCLs) are a heterogeneous group of aggressive non-Hodgkin lymphomas, the majority of which have high relapse rates following standard therapy. Despite use of consolidative stem cell transplant (SCT) following frontline therapy, there remains no consensus on its utility. The double-blind randomized phase 3 ECHELON-2 study (#NCT01777152; clinicaltrials.gov) demonstrated improved progression-free survival (PFS) and overall survival with frontline brentuximab vedotin plus cyclophosphamide, doxorubicin, and prednisone (A+CHP). Herein, we conducted an exploratory subgroups analysis of the impact of consolidative SCT on PFS in patients with previously untreated CD30+ PTCL (ALK- anaplastic large cell lymphoma [ALCL] and non-ALCL) who were in complete response (CR) after frontline treatment with A+CHP or cyclophosphamide, doxorubicin, vincristine, and prednisone. Median PFS follow-up was 47.57 months. The PFS hazard ratio was 0.36, equating to a 64% reduction in the risk of a PFS event in patients who underwent SCT. The median PFS in patients who underwent SCT was not reached, vs 55.66 months in patients who did not undergo SCT. PFS results favored the use of SCT in both ALK- ALCL and non-ALCL subgroups. These data support the consideration of consolidative SCT in patients with CD30+PTCL who achieve CR following treatment with A+CHP
Clinical Benefit of Tamsulosin and the Hexanic Extract of Serenoa Repens, in Combination or as Monotherapy, in Patients with Moderate/Severe LUTS-BPH: A Subset Analysis of the QUALIPROST Study
To investigate whether tamsulosin (TAM) and the hexanic extract of Serenoa repens (HESr) are more effective in combination than as monotherapy in men with moderate-to-severe lower urinary tract symptoms associated with benign prostatic hyperplasia (LUTS/BPH). Subset analysis of data from a 6-month, multicenter observational study. Patients received either tamsulosin (0.4 mg/day) or HESr (320 mg/day) alone or in combination. Primary endpoints were change in symptoms and quality of life. Tolerability was also assessed. Seven hundred and nine patients were available for intention to treat (ITT) analysis, 263 treated with tamsulosin, 262 with HESr, and 184 with TAM + HESr. After 6 months, International Prostate Symptom Score (IPSS) scores improved by a mean (standard deviation) of 7.2 (5.0) points in the TAM + HESr group compared to 5.7 (4.3) points with TAM alone and 5.4 (4.6) points with HESr (p < 0.001). Quality of life showed greatest improvement with combination therapy (p < 0.02). Adverse effects were reported by 1.9% of patients receiving HESr, 13.3% receiving TAM, and 12.0% receiving TAM + HESr (p < 0.001). In men with moderate/severe LUTS/BPH, combination treatment with TAM + HESr produced more effective symptom relief and greater improvement in quality of life than with either treatment alone, with acceptable tolerability
Standardizing Clinical Trials Workflow Representation in UML for International Site Comparison
BACKGROUND: With the globalization of clinical trials, a growing emphasis has been placed on the standardization of the workflow in order to ensure the reproducibility and reliability of the overall trial. Despite the importance of workflow evaluation, to our knowledge no previous studies have attempted to adapt existing modeling languages to standardize the representation of clinical trials. Unified Modeling Language (UML) is a computational language that can be used to model operational workflow, and a UML profile can be developed to standardize UML models within a given domain. This paper's objective is to develop a UML profile to extend the UML Activity Diagram schema into the clinical trials domain, defining a standard representation for clinical trial workflow diagrams in UML. METHODS: Two Brazilian clinical trial sites in rheumatology and oncology were examined to model their workflow and collect time-motion data. UML modeling was conducted in Eclipse, and a UML profile was developed to incorporate information used in discrete event simulation software. RESULTS: Ethnographic observation revealed bottlenecks in workflow: these included tasks requiring full commitment of CRCs, transferring notes from paper to computers, deviations from standard operating procedures, and conflicts between different IT systems. Time-motion analysis revealed that nurses' activities took up the most time in the workflow and contained a high frequency of shorter duration activities. Administrative assistants performed more activities near the beginning and end of the workflow. Overall, clinical trial tasks had a greater frequency than clinic routines or other general activities. CONCLUSIONS: This paper describes a method for modeling clinical trial workflow in UML and standardizing these workflow diagrams through a UML profile. In the increasingly global environment of clinical trials, the standardization of workflow modeling is a necessary precursor to conducting a comparative analysis of international clinical trials workflows
Consensus on circulatory shock and hemodynamic monitoring. Task force of the European Society of Intensive Care Medicine.
OBJECTIVE: Circulatory shock is a life-threatening syndrome resulting in multiorgan failure and a high mortality rate. The aim of this consensus is to provide support to the bedside clinician regarding the diagnosis, management and monitoring of shock.
METHODS: The European Society of Intensive Care Medicine invited 12 experts to form a Task Force to update a previous consensus (Antonelli et al.: Intensive Care Med 33:575-590, 2007). The same five questions addressed in the earlier consensus were used as the outline for the literature search and review, with the aim of the Task Force to produce statements based on the available literature and evidence. These questions were: (1) What are the epidemiologic and pathophysiologic features of shock in the intensive care unit ? (2) Should we monitor preload and fluid responsiveness in shock ? (3) How and when should we monitor stroke volume or cardiac output in shock ? (4) What markers of the regional and microcirculation can be monitored, and how can cellular function be assessed in shock ? (5) What is the evidence for using hemodynamic monitoring to direct therapy in shock ? Four types of statements were used: definition, recommendation, best practice and statement of fact.
RESULTS: Forty-four statements were made. The main new statements include: (1) statements on individualizing blood pressure targets; (2) statements on the assessment and prediction of fluid responsiveness; (3) statements on the use of echocardiography and hemodynamic monitoring.
CONCLUSIONS: This consensus provides 44 statements that can be used at the bedside to diagnose, treat and monitor patients with shock
2012 Market Report on U.S. Wind Technologies in Distributed Applications
At the end of 2012, U.S. wind turbines in distributed applications reached a 10-year cumulative installed capacity of more than 812 MW from more than 69,000 units across all 50 states. In 2012 alone, nearly 3,800 wind turbines totaling 175 MW of distributed wind capacity were documented in 40 states and in the U.S. Virgin Islands, with 138 MW using utility-scale turbines (i.e., greater than 1 MW in size), 19 MW using mid-size turbines (i.e., 101 kW to 1 MW in size), and 18.4 MW using small turbines (i.e., up to 100 kW in size). Distributed wind is defined in terms of technology application based on a wind project’s location relative to end-use and power-distribution infrastructure, rather than on technology size or project size. Distributed wind systems are either connected on the customer side of the meter (to meet the onsite load) or directly to distribution or micro grids (to support grid operations or offset large loads nearby). Estimated capacity-weighted average costs for 2012 U.S. distributed wind installations was 2,810/kW for mid-sized wind turbines, and 4,080/kW. As a result of multiple projects using utility-scale turbines, Iowa deployed the most new overall distributed wind capacity, 37 MW, in 2012. Nevada deployed the most small wind capacity in 2012, with nearly 8 MW of small wind turbines installed in distributed applications. In the case of mid-size turbines, Ohio led all states in 2012 with 4.9 MW installed in distributed applications. State and federal policies and incentives continued to play a substantial role in the development of distributed wind projects. In 2012, U.S. Treasury Section 1603 payments and grants and loans from the U.S. Department of Agriculture’s Rural Energy for America Program were the main sources of federal funding for distributed wind projects. State and local funding varied across the country, from rebates to loans, tax credits, and other incentives. Reducing utility bills and hedging against potentially rising electricity rates remain drivers of distributed wind installations. In 2012, other drivers included taking advantage of the expiring U.S. Treasury Section 1603 program and a prosperous year for farmers. While 2012 saw a large addition of distributed wind capacity, considerable barriers and challenges remain, such as a weak domestic economy, inconsistent state incentives, and very competitive solar photovoltaic and natural gas prices. The industry remains committed to improving the distributed wind marketplace by advancing the third-party certification process and introducing alternative financing models, such as third-party power purchase agreements and lease-to-own agreements more typical in the solar photovoltaic market. Continued growth is expected in 2013
- …