Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel

The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe tomography and scanning transmission electron microscopy. It was shown that the refinement of the microstructure affects the precipitation kinetics and the spatial distribution of the secondary hardening intermetallic phase, which was observed to nucleate heterogeneously on dislocations and sub-grain boundaries. It was revealed that alloys successively subjected to these two strengthening mechanisms exhibit a lower increase in mechanical strength than a simple estimation based on the summation of the two individual strengthening mechanisms

Affinement de microstructures de métaux par des déformations plastiques extrêmes

For several years, Severe Plastic Deformation (SPD) processes have been developed to refine the microstructure of metals in order to obtain ultrafine grains (UFG). This refinement attributes improved properties (ex: yield stress) to the material. The overall geometry of the material remains unchanged. That is why these processes are specific for a given geometry. For this purpose, a process recently initiated at the LEM3, the so called HPTT – High Pressure Tube Twisting – is designed to nanostructure tubular samples. A tube is confined by applying a hydrostatic pressure of several GPa and large friction forces are generated. A shear strain (> 4) is finally applied in the tube thickness. In this thesis, an experimental device was developed and used to produce UFG materials. Finite element and analytical studies have been carried out to understand the stress and strain state in the tube wall. The obtained ultrafine grains IF (Interstitial-Free) steel was characterized to determine the evolution of the microstructure (SEM-EBSD), textures (X-rays) and the mechanical behavior (compression tests). For a better understanding of the fragmentation phenomena, a polycrystal code involving lattice curvature as the main element leading to refinement of the microstructure was used and compared with experimental measurements. This work is concluded by a study on the limited grain size achievable by SPD processesDepuis plusieurs années, les procédés à grandes déformations plastiques (SPD) sont développés pour affiner la microstructure de métaux afin d’obtenir des tailles de grains submicroniques. Cet affinement confère au matériau des propriétés améliorées (ex : limite élastique). Durant ces procédés, la géométrie globale du matériau reste inchangée. C’est pourquoi les procédés sont spécifiques pour une géométrie donnée. Dans cet objectif, un procédé récemment inventé au sein du LEM3, nommé HPTT - High Pressure Tube Twisting – permet de nanostructurer des échantillons tubulaires. Un tube est confiné par l’application d’une pression hydrostatique de plusieurs GPa et de grandes forces de frottement sont ainsi générées. Une déformation en cisaillement (> 4) dans l’épaisseur du tube est ensuite appliquée. Dans le cadre de cette thèse, un dispositif expérimental a été développé et utilisé pour la production d’échantillons à grains ultrafins (UFG). Des études analytiques et par éléments finis ont permis de comprendre l’état de contrainte et de déformation dans la paroi du tube. Un acier IF (Interstitial-Free) rendu nanostructuré a fait l’objet de caractérisations approfondies pour déterminer l’évolution de la microstructure (MEB-EBSD), des textures (rayons X) et du comportement mécanique (compression). Dans le but de mieux comprendre les phénomènes de fragmentation, un code polycristallin impliquant la courbure du réseau comme élément principal conduisant à l’affinement de la microstructure a été utilisé et comparé aux mesures expérimentales. Ce travail est conclu par une étude de la taille limite atteignable par ces procédé

Refinement of microstructure of metal by severe plastic deformation

Depuis plusieurs années, les procédés à grandes déformations plastiques (SPD) sont développés pour affiner la microstructure de métaux afin d’obtenir des tailles de grains submicroniques. Cet affinement confère au matériau des propriétés améliorées (ex : limite élastique). Durant ces procédés, la géométrie globale du matériau reste inchangée. C’est pourquoi les procédés sont spécifiques pour une géométrie donnée. Dans cet objectif, un procédé récemment inventé au sein du LEM3, nommé HPTT - High Pressure Tube Twisting – permet de nanostructurer des échantillons tubulaires. Un tube est confiné par l’application d’une pression hydrostatique de plusieurs GPa et de grandes forces de frottement sont ainsi générées. Une déformation en cisaillement (> 4) dans l’épaisseur du tube est ensuite appliquée. Dans le cadre de cette thèse, un dispositif expérimental a été développé et utilisé pour la production d’échantillons à grains ultrafins (UFG). Des études analytiques et par éléments finis ont permis de comprendre l’état de contrainte et de déformation dans la paroi du tube. Un acier IF (Interstitial-Free) rendu nanostructuré a fait l’objet de caractérisations approfondies pour déterminer l’évolution de la microstructure (MEB-EBSD), des textures (rayons X) et du comportement mécanique (compression). Dans le but de mieux comprendre les phénomènes de fragmentation, un code polycristallin impliquant la courbure du réseau comme élément principal conduisant à l’affinement de la microstructure a été utilisé et comparé aux mesures expérimentales. Ce travail est conclu par une étude de la taille limite atteignable par ces procédésFor several years, Severe Plastic Deformation (SPD) processes have been developed to refine the microstructure of metals in order to obtain ultrafine grains (UFG). This refinement attributes improved properties (ex: yield stress) to the material. The overall geometry of the material remains unchanged. That is why these processes are specific for a given geometry. For this purpose, a process recently initiated at the LEM3, the so called HPTT – High Pressure Tube Twisting – is designed to nanostructure tubular samples. A tube is confined by applying a hydrostatic pressure of several GPa and large friction forces are generated. A shear strain (> 4) is finally applied in the tube thickness. In this thesis, an experimental device was developed and used to produce UFG materials. Finite element and analytical studies have been carried out to understand the stress and strain state in the tube wall. The obtained ultrafine grains IF (Interstitial-Free) steel was characterized to determine the evolution of the microstructure (SEM-EBSD), textures (X-rays) and the mechanical behavior (compression tests). For a better understanding of the fragmentation phenomena, a polycrystal code involving lattice curvature as the main element leading to refinement of the microstructure was used and compared with experimental measurements. This work is concluded by a study on the limited grain size achievable by SPD processe

Extension of the Derby relation to metals severely deformed to their steady-state ultrafine-grain size

International audienceIt was documented by Derby in 1992 that the flow stress is in power-law relationship with the steady-state grain size obtained in dynamic recrystallization. This relation has been found valid in this paper also for ultrafine-grained metals that can be obtained by severe plastic deformation. For these materials, the exponent is -0.5, which is the Hall-Petch relation. In copper, a uniform dislocation density without geometrically necessary dislocations is valid for this state. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved

Severe plastic deformation processes for thin samples

Among the known severe plastic deformation (SPD) techniques, one particular group can be defined as SPD processing of thin samples. Their distinctive feature is that one of the sample dimensions, namely the thickness, is much smaller than the other two dimensions. Examples include High Pressure Torsion and two recently developed techniques: the Cone-Cone Method and the High Pressure Tube Twisting. The mentioned group of SPD processes involve frictional forces acting on the large surfaces and a high hydrostatic pressure within the deformation zone. These techniques are particularly suited for microforming of metals. In this article, we outline the commonalities between these three techniques. The microstructure of copper samples deformed by all the three processes is presented and compared with those obtained by equal-channel angular pressing as a reference bulk forming SPD technique

Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel

International audienceThe combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe tomography and scanning transmission electron microscopy. It was shown that the refinement of the microstructure affects the precipitation kinetics and the spatial distribution of the secondary hardening intermetallic phase, which was observed to nucleate heterogeneously on dislocations and sub-grain boundaries. It was revealed that alloys successively subjected to these two strengthening mechanisms exhibit a lower increase in mechanical strength than a simple estimation based on the summation of the two individual strengthening mechanisms

Dry friction of steel under high pressure in quasi-static conditions

International audienceMeasurements were carried out for static and kinetic friction coefficients for steel as a function of the normal pressure for two surface roughness conditions of the matrix: ground and sand blasted. The samples were interstitial free steels, the tests were done at room temperature, in quasi-static and dry contact conditions. Very high pressures were applied in the range of 230-1100 MPa in order to simulate the conditions of testing in severe plastic deformation processes of metals. A new device was designed for this purpose. The results showed a decrease of the friction coefficients with the applied normal stress with stronger dependence for sand blasted surfaces

High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review

The High Pressure Tube Twisting (HPTT) process was first proposed in 2009 as an efficient new Severe Plastic Deformation (SPD) process. Since then it has been successfully applied on many different materials and the results have been reported in several publications and thesis works. The purpose of this overview is to present and evaluate the main results of the published papers and thesis works and also to present new contributions. Special attention is given to the strain gradient which appears in the tube wall for which a new empirical formula is presented