Thermal expansion of composites using Moire interferometry

An experimental technique for precise measurement of the thermal response of fiber-reinforced composite materials uses moire interferometry with fringe multiplication which yield a sensitivity of 833 nm (32.8 mu in.) per fringe. Results from the technique are compared with those obtained from electrical resistance strain gages, and also those predicted from classical lamination theory. Temperature dependent coefficients of thermal expansion for composite materials subjected to thermal cycling in the temperature range of 297 K (75 F) to 422 K (300 F) were determined for four laminate configurations (0, 90, 0/ + or - 45/90 sub s and 0/90/ + or - 45 sub s) of T300/5208 graphite epoxy, and ranged from -0.107 mu epsilon K/1 (-0.059 mu epsilon deg F/-) for the 0 laminate to 32.18 mu epsilon K/1 (17.88 mu epsilon F/1) for the 90 laminate. Moisture was found to greatly influence the thermal response of a quasi-isotropic laminate, resulting in hysteresis and residual compressive strain as the moisture content was reduced. Comparisons between moire and strain gage measurements were inconclusive with both techniques giving consistent but systematically different results. Differences of as much as 29% were observed

Advances in Moire interferometry for thermal response of composites

An experimental technique for the precise measurement of the thermal response of both sides of a laminated composite coupon specimen uses Moire interferometry with fringe multiplication which yields a sensitivity of 833 nm (32.8 micro in.) per fringe. The reference gratings used are virtual gratings and are formed by partially mirrorized glass prisms in close proximity to the specimen. Results are compared with both results obtained from tests which used Moire interferometry on one side of composite laminates, and with those predicted by classical lamination theory. The technique is shown to be capable of producing the sensitivity and accuracy necessary to measure a wide range of thermal responses and to detect small side to side variations in the measured response. Tests were conducted on four laminate configurations of T300/5208 graphite epoxy over a temperature range of 297 K (75 F) to 422 K (300 F). The technique presented allows for the generation of reference gratings for temperature regimes well outside that used in these tests

Calculations of Energy Losses due to Atomic Processes in Tokamaks with Applications to the ITER Divertor

Reduction of the peak heat loads on the plasma facing components is essential for the success of the next generation of high fusion power tokamaks such as the International Thermonuclear Experimental Reactor (ITER) 1 . Many present concepts for accomplishing this involve the use of atomic processes to transfer the heat from the plasma to the main chamber and divertor chamber walls and much of the experimental and theoretical physics research in the fusion program is directed toward this issue. The results of these experiments and calculations are the result of a complex interplay of many processes. In order to identify the key features of these experiments and calculations and the relative role of the primary atomic processes, simple quasi-analytic models and the latest atomic physics rate coefficients and cross sections have been used to assess the relative roles of central radiation losses through bremsstrahlung, impurity radiation losses from the plasma edge, charge exchange and hydrogen radiation losses from the scrape-off layer and divertor plasma and impurity radiation losses from the divertor plasma. This anaysis indicates that bremsstrahlung from the plasma center and impurity radiation from the plasma edge and divertor plasma can each play a significant role in reducing the power to the divertor plates, and identifies many of the factors which determine the relative role of each process. For instance, for radiation losses in the divertor to be large enough to radiate the power in the divertor for high power experiments, a neutral fraction of 10-3 to 10-2 and an impurity recycling rate of netrecycle of ~ 10^16 s m^-3 will be required in the divertor.Comment: Preprint for the 1994 APSDPP meeting, uuencoded and gzipped postscript with 22 figures, 40 pages

Semirelativistic stability of N-boson systems bound by 1/r pair potentials

We analyze a system of self-gravitating identical bosons by means of a semirelativistic Hamiltonian comprising the relativistic kinetic energies of the involved particles and added (instantaneous) Newtonian gravitational pair potentials. With the help of an improved lower bound to the bottom of the spectrum of this Hamiltonian, we are able to enlarge the known region for relativistic stability for such boson systems against gravitational collapse and to sharpen the predictions for their maximum stable mass.Comment: 11 pages, considerably enlarged introduction and motivation, remainder of the paper unchange

Maxwell's theory on a post-Riemannian spacetime and the equivalence principle

The form of Maxwell's theory is well known in the framework of general relativity, a fact that is related to the applicability of the principle of equivalence to electromagnetic phenomena. We pose the question whether this form changes if torsion and/or nonmetricity fields are allowed for in spacetime. Starting from the conservation laws of electric charge and magnetic flux, we recognize that the Maxwell equations themselves remain the same, but the constitutive law must depend on the metric and, additionally, may depend on quantities related to torsion and/or nonmetricity. We illustrate our results by putting an electric charge on top of a spherically symmetric exact solution of the metric-affine gauge theory of gravity (comprising torsion and nonmetricity). All this is compared to the recent results of Vandyck.Comment: 9 pages, REVTeX, no figures; minor changes, version to be published in Class. Quantum Gra

Understanding and Finding Solutions to the Problem of Sedimentation in the National Wildlife Refuge System

The National Wildlife Refuge System (Refuge System) is a collection of public lands maintained by the U.S. Fish and Wildlife Service for migratory birds and other wildlife. Wetlands on individual National Wildlife Refuges (Refuges) may be at risk of increased sedimentation because of land use and water management practices. Increased sedimentation can reduce wetland habitat quality by altering hydrologic function, degrading water quality, and inhibiting growth of vegetation and invertebrates. On Refuges negatively affected by increased sedimentation, managers have to address complex questions about how to best remediate and mitigate the negative effects. The best way to account for these complexities is often not clear. On other Refuges, managers may not know whether sedimentation is a problem. Decision makers in the Refuge System may need to allocate resources to studying which Refuges could be at risk. Such analyses would help them understand where to direct support for managing increased sedimentation. In this paper, we summarize a case study demonstrating the use of decision-analytic tools in the development of a sedimentation management plan for Agassiz National Wildlife Refuge, Minnesota. Using what we learned from that process, we surveyed other Refuges in U.S. Fish and Wildlife Service Region 3 (an area encompassing the states of Illinois, Indiana, Iowa, Ohio, Michigan, Minnesota, Missouri, and Wisconsin) and Region 6 (an area encompassing the states of Colorado, Kansas, Montana, Nebraska, North Dakota, South Dakota, Utah, and Wyoming) about whether they experience sediment-related impacts to management. Our results show that cases of management being negatively affected by increased sedimentation are not isolated. We suggest that the Refuge System conduct a comprehensive and systematic assessment of increased sedimentation among Refuges to understand the importance of sedimentation in context with other management problems that Refuges face. The results of such an assessment could guide how the Refuge System allocates resources to studying and managing widespread stressors

The Constitutive Relations and the Magnetoelectric Effect for Moving Media

In this paper the constitutive relations for moving media with homogeneous and isotropic electric and magnetic properties are presented as the connections between the generalized magnetization-polarization bivector $$ and the electromagnetic field F. Using the decompositions of F and $\mathcal{M}$, it is shown how the polarization vector P(x) and the magnetization vector M(x) depend on E, B and two different velocity vectors, u - the bulk velocity vector of the medium, and v - the velocity vector of the observers who measure E and B fields. These constitutive relations with four-dimensional geometric quantities, which correctly transform under the Lorentz transformations (LT), are compared with Minkowski's constitutive relations with the 3-vectors and several essential differences are pointed out. They are caused by the fact that, contrary to the general opinion, the usual transformations of the 3-vectors $$, $\mathbf{B}$, $\mathbf{P}$, $\mathbf{M}$, etc. are not the LT. The physical explanation is presented for the existence of the magnetoelectric effect in moving media that essentially differs from the traditional one.Comment: 18 pages, In Ref. [10] here, which corresponds to Ref. [18] in the published paper in IJMPB, Z. Oziewicz's published paper is added. arXiv admin note: text overlap with arXiv:1101.329

A generalized photon propagator

A covariant gauge independent derivation of the generalized dispersion relation of electromagnetic waves in a medium with local and linear constitutive law is presented. A generalized photon propagator is derived. For Maxwell constitutive tensor, the standard light cone structure and the standard Feynman propagator are reinstated

Relating the Time Complexity of Optimization Problems in Light of the Exponential-Time Hypothesis

Obtaining lower bounds for NP-hard problems has for a long time been an active area of research. Recent algebraic techniques introduced by Jonsson et al. (SODA 2013) show that the time complexity of the parameterized SAT($\cdot$) problem correlates to the lattice of strong partial clones. With this ordering they isolated a relation $R$ such that SAT($R$) can be solved at least as fast as any other NP-hard SAT($\cdot$) problem. In this paper we extend this method and show that such languages also exist for the max ones problem (MaxOnes($\Gamma$)) and the Boolean valued constraint satisfaction problem over finite-valued constraint languages (VCSP($\Delta$)). With the help of these languages we relate MaxOnes and VCSP to the exponential time hypothesis in several different ways.Comment: This is an extended version of Relating the Time Complexity of Optimization Problems in Light of the Exponential-Time Hypothesis, appearing in Proceedings of the 39th International Symposium on Mathematical Foundations of Computer Science MFCS 2014 Budapest, August 25-29, 201