Chemically-synthesised, atomically-precise gold clusters deposited and activated on titania

Synchrotron XPS was used to investigate a series of chemically-synthesised, atomically-precise gold clusters Au(n)(PPh₃)(y) (n = 8, 9, 11 and 101, with y depending on cluster size) immobilized on titania nanoparticles. The gold clusters were washed with toluene at 100 °C or calcined at 200 °C to remove the organic ligand. From the position of the Au 4f₇/₂ peak it is concluded that cluster size is not altered through the deposition. From the analysis of the phosphorous spectra, it can be concluded that the applied heat treatment removes the organic ligands. Washing and calcination leads to partial oxidation and partial agglomeration of the clusters. Oxidation of the clusters is most likely due to the interaction of the cluster core with the oxygen of the titania surface after removal of ligands. The position of the Au 4f₇/₂ peak indicates that the size of the agglomerated clusters is still smaller than that of Au₁₀₁.David P. Anderson, Jason F. Alvino, Alexander Gentleman, Hassan Al Qahtani, Lars Thomsen, Matthew I. J. Polson, Gregory F. Metha, Vladimir B. Golovko and Gunther G. Andersso

Ghost marks - gloss-related defects in injection-molded plastics

The production of injection-molded parts free from surface appearance defects is of great importance in the manufacturing of high-quality products. A particular surface defect which occurs on components manufactured from an acrylonitrile-butadiene-styrene copolymer (ABS) is here described. The defect has been called ghost marks and is characterized by a local change in gloss or lightness which is only visually detectable in certain viewing angles and conditions of illumination. By means of scanning electron microscopy, small-scale deformations of the surface texture were observed in the area of the defect which in turn alters the light scattering properties of the surface. The light scattering properties were evaluated by means of a multiangle spectrophotometer. The holding pressure during the injection molding process was shown to play a significant role in the formation of the ghost marks possibly imposing forces causing the deformation of the surface texture. The deformations may also occur from nonuniform thermal surface shrinkage during cooling. The type of texture and wall thickness also influences the occurrence of ghost marks.POLYM. ENG. SCI., 2012. \ua9 2011 Society of Plastics Engineers

Ghost marks - gloss-related defects in injection-molded plastics

The production of injection-molded parts free from surface appearance defects is of great importance in the manufacturing of high-quality products. A particular surface defect which occurs on components manufactured from an acrylonitrile-butadiene-styrene copolymer (ABS) is here described. The defect has been called ghost marks and is characterized by a local change in gloss or lightness which is only visually detectable in certain viewing angles and conditions of illumination. By means of scanning electron microscopy, small-scale deformations of the surface texture were observed in the area of the defect which in turn alters the light scattering properties of the surface. The light scattering properties were evaluated by means of a multiangle spectrophotometer. The holding pressure during the injection molding process was shown to play a significant role in the formation of the ghost marks possibly imposing forces causing the deformation of the surface texture. The deformations may also occur from nonuniform thermal surface shrinkage during cooling. The type of texture and wall thickness also influences the occurrence of ghost marks.POLYM. ENG. SCI., 2012. \ua9 2011 Society of Plastics Engineers

Comment on “Oxygen Vacancy Origin of the Surface Band-Gap State of TiO2(110)”

Wendt S, Bechstein R, Porsgaard S, et al. Comment on “Oxygen Vacancy Origin of the Surface Band-Gap State of TiO2(110)”. Physical Review Letters. 2010;104(25): 259703