Ceramic vane demonstration in an industrial turbine

A DOE program with Allison Engine Co. will demonstrate ceramic vanes in an industrial turbine. First-stage ceramic vanes and metallic mounts are to be designed, fabricated, and operated in a short-term engine test (up to 50 hr). The vanes and mounts will then be retrofitted into an existing turbine for operation at a commercial site for up to 8000 hr. They have been designed. Thermal and stress analyses of the vanes have calculated acceptable fast fracture stress levels and probabilities of survival > 99.99% for turbine continuous power and emergency shutdown (thermal shock) conditions. Max calculated steady-state stress is 169 MPa at 1182 C, so currently available ceramics appear to provide acceptable fast fracture strengths for use in industrial turbines. Long-term materials test will evaluate the lifetimes and retained strength of ceramics at stress and temperature levels in the range calculated from the ceramic vane analyses. Results of these tests will support on which vane material will be used in the long duration turbine demonstration. A successful demonstration could provide a basis for incorporating first-stage ceramic vanes into current generation industrial turbines and also the introduction of ceramic airfoils into downstream rows of future high temperature Advanced Turbine System (ATS) engines

Adaptive phase estimation is more accurate than non-adaptive phase estimation for continuous beams of light

We consider the task of estimating the randomly fluctuating phase of a continuous-wave beam of light. Using the theory of quantum parameter estimation, we show that this can be done more accurately when feedback is used (adaptive phase estimation) than by any scheme not involving feedback (non-adaptive phase estimation) in which the beam is measured as it arrives at the detector. Such schemes not involving feedback include all those based on heterodyne detection or instantaneous canonical phase measurements. We also demonstrate that the superior accuracy adaptive phase estimation is present in a regime conducive to observing it experimentally.Comment: 15 pages, 9 figures, submitted to PR

Dynamics of the self-interacting chameleon cosmology

In this article we study the properties of the flat FRW chameleon cosmology in which the cosmic expansion of the Universe is affected by the chameleon field and dark energy. In particular, we perform a detailed examination of the model in the light of numerical analysis. The results illustrate that the interacting chameleon filed plays an important role in late time universe acceleration and phantom crossing.Comment: 13 pages, 8 figures, to appear in Astrophysics and Space Sc

Revisiting Generalized Chaplygin Gas as a Unified Dark Matter and Dark Energy Model

In this paper, we revisit generalized Chaplygin gas (GCG) model as a unified dark matter and dark energy model. The energy density of GCG model is given as $\rho_{GCG}/\rho_{GCG0}=[B_{s}+(1-B_{s})a^{-3(1+\alpha)}]^{1/(1+\alpha)}$, where $\alpha$ and $B_s$ are two model parameters which will be constrained by type Ia supernova as standard candles, baryon acoustic oscillation as standard rulers and the seventh year full WMAP data points. In this paper, we will not separate GCG into dark matter and dark energy parts any more as adopted in the literatures. By using Markov Chain Monte Carlo method, we find the result: $\alpha=0.00126_{- 0.00126- 0.00126}^{+ 0.000970+ 0.00268}$ and $B_s= 0.775_{- 0.0161- 0.0338}^{+ 0.0161+ 0.0307}$.Comment: 6 pages, 4 figure

The Physics of turbulent and dynamically unstable Herbig-Haro jets

The overall properties of the Herbig-Haro objects such as centerline velocity, transversal profile of velocity, flow of mass and energy are explained adopting two models for the turbulent jet. The complex shapes of the Herbig-Haro objects, such as the arc in HH34 can be explained introducing the combination of different kinematic effects such as velocity behavior along the main direction of the jet and the velocity of the star in the interstellar medium. The behavior of the intensity or brightness of the line of emission is explored in three different cases : transversal 1D cut, longitudinal 1D cut and 2D map. An analytical explanation for the enhancement in intensity or brightness such as usually modeled by the bow shock is given by a careful analysis of the geometrical properties of the torus.Comment: 17 pages, 10 figures. Accepted for publication in Astrophysics & Spac

Cosmological parameters from SDSS and WMAP

We measure cosmological parameters using the three-dimensional power spectrum P(k) from over 200,000 galaxies in the Sloan Digital Sky Survey (SDSS) in combination with WMAP and other data. Our results are consistent with a ``vanilla'' flat adiabatic Lambda-CDM model without tilt (n=1), running tilt, tensor modes or massive neutrinos. Adding SDSS information more than halves the WMAP-only error bars on some parameters, tightening 1 sigma constraints on the Hubble parameter from h~0.74+0.18-0.07 to h~0.70+0.04-0.03, on the matter density from Omega_m~0.25+/-0.10 to Omega_m~0.30+/-0.04 (1 sigma) and on neutrino masses from <11 eV to <0.6 eV (95%). SDSS helps even more when dropping prior assumptions about curvature, neutrinos, tensor modes and the equation of state. Our results are in substantial agreement with the joint analysis of WMAP and the 2dF Galaxy Redshift Survey, which is an impressive consistency check with independent redshift survey data and analysis techniques. In this paper, we place particular emphasis on clarifying the physical origin of the constraints, i.e., what we do and do not know when using different data sets and prior assumptions. For instance, dropping the assumption that space is perfectly flat, the WMAP-only constraint on the measured age of the Universe tightens from t0~16.3+2.3-1.8 Gyr to t0~14.1+1.0-0.9 Gyr by adding SDSS and SN Ia data. Including tensors, running tilt, neutrino mass and equation of state in the list of free parameters, many constraints are still quite weak, but future cosmological measurements from SDSS and other sources should allow these to be substantially tightened.Comment: Minor revisions to match accepted PRD version. SDSS data and ppt figures available at http://www.hep.upenn.edu/~max/sdsspars.htm

A Search for Selectrons and Squarks at HERA

Data from electron-proton collisions at a center-of-mass energy of 300 GeV are used for a search for selectrons and squarks within the framework of the minimal supersymmetric model. The decays of selectrons and squarks into the lightest supersymmetric particle lead to final states with an electron and hadrons accompanied by large missing energy and transverse momentum. No signal is found and new bounds on the existence of these particles are derived. At 95% confidence level the excluded region extends to 65 GeV for selectron and squark masses, and to 40 GeV for the mass of the lightest supersymmetric particle.Comment: 13 pages, latex, 6 Figure

Search for W' bosons decaying to an electron and a neutrino with the D0 detector

This Letter describes the search for a new heavy charged gauge boson W' decaying into an electron and a neutrino. The data were collected with the D0 detector at the Fermilab Tevatron proton-antiproton Collider at a center-of-mass energy of 1.96 TeV, and correspond to an integrated luminosity of about 1 inverse femtobarn. Lacking any significant excess in the data in comparison with known processes, an upper limit is set on the production cross section times branching fraction, and a W' boson with mass below 1.00 TeV can be excluded at the 95% C.L., assuming standard-model-like couplings to fermions. This result significantly improves upon previous limits, and is the most stringent to date.Comment: submitted to Phys. Rev. Let