Tribocorrosion behavior of bio-functionalized highly porous titanium

Titanium and its alloys are widely used in orthopedic and dental implants, however, some major clinical concerns such as poor wear resistance, lack of bioactivity, and bone resorption due to stress shielding are yet to be overcome. In order to improve these drawbacks, highly porous Ti samples having functionalized surfaces were developed by powder metallurgy with space holder technique followed by anodic treatment. Tribocorrosion tests were performed in 9 g/L NaCl solution using a unidirectional pin-on-disc tribometer under 3 N normal load, 1 Hz frequency and 4 mm track diameter. Open circuit potential (OCP) was measured before, during and after sliding. Worn surfaces investigated by field emission gun scanning electron microscope (FEG-SEM) equipped with energy dispersive X-ray spectroscopy (EDS). Results suggested bio-functionalized highly porous samples presented lower tendency to corrosion under sliding against zirconia pin, mainly due to the load carrying effect given by the hard protruded oxide surfaces formed by the anodic treatment.This study was supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 - Programa Operacional Competitividade e Internacionalizacao (POCI) with the reference project POCI-01-0145-FEDER-006941, Programa de Accoes Universitarias Integradas Luso-Francesas' (PAUILF TC-12_14), and the Calouste Gulbenkian Foundation through "Programa de Mobilidade Academica para Professores". The authors also gratefully acknowledge the "Investissements d'avenir" programs (nos. ANR-11-IDEX-0003-02 and ANR-10- EQPX-37 MATMECA Grant) for financial support.info:eu-repo/semantics/publishedVersio

Influence of macroporosity on NIH/3T3 adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 over bio-functionalized highly porous titanium implant material

Highly porous Ti implant materials are being used in order to overcome the stress shielding effect on orthopedic implants. However, the lack of bioactivity on Ti surfaces is still a major concern regarding the osseointegration process. It is known that the rapid recruitment of osteoblasts in bone defects is an essential prerequisite for efficient bone repair. Conventionally, osteoblast recruitment to bone defects and subsequent bone repair has been achieved using growth factors. Thus, in this study highly porous Ti samples were processed by powder metallurgy using space holder technique followed by the bio-functionalization through microarc oxidation using a Ca- and P-rich electrolyte. The biological response in terms of early cell response, namely, adhesion, spreading, viability, and proliferation of the novel biofunctionalized highly porous Ti was carried out with NIH/3T3 fibroblasts and MC3T3-E1 preosteoblasts in terms of viability, adhesion, proliferation, and alkaline phosphatase activity. Results showed that bio-functionalization did not affect the cell viability. However, bio-functionalized highly porous Ti (22% porosity) enhanced the cell proliferation and activity. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 73–85, 2019.FCT . Grant Number: UID/EEA/04436/2013 | FEDER (COMPETE 2020 – Programa Operacional Competitividade e Internacionalização [POCI]) . Grant Number: POCI‐01–0145‐FEDER‐006941 | Programa de Acções Universitárias Integradas Luso‐Francesas . Grant Number: PAUILF TC‐12_1

Corrosion mechanisms in titanium oxide-based films produced by anodic treatment

Thanks to its excellent corrosion resistance, good mechanical properties and biocompatibility, titanium has been widely used as dental implant material. A passive oxide film formed on titanium surface is responsible for its high corrosion resistance. This study has evaluated the surface characteristics of oxide layers formed on commercially pure titanium samples by anodic treatment and the effect of anodic treatment on their corrosion behaviour. FEG-SEM and XRD were used to evaluate the micromorphology and crystalline structure of these oxide films. Their corrosion resistance was evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves. EIS was performed for different times of immersion and a new equivalent electrical circuit (EEC) is proposed to fit the experimental data of the anodic oxide films. It was concluded that the morphology, composition, and structure of the outer porous layer of the anodic layer determine the corrosion protection of the material. (C) 2017 Elsevier Ltd. All rights reserved.This work is supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 Programa Operacional Competitividade e Internacionalizacao (POCI) with the reference project POCI-01-0145-FEDER-006941. Part of this work was done within the Scientific Community on Surface Modification of Materials funded by FWO-Flanders (grant number WO.039.14N), and within the scope of the EU-funded COST MP1407 "E-MINDS. CQE is financed by FCT under contract UID/QUI/00100/2013.info:eu-repo/semantics/publishedVersio

Evolution des propriétés tribocorrosives du 316L dans un milieu Nacl

International audienc

Corrosion behaviour of titanium in the presence of Streptococcus mutans

Objective The main aim of this in vitro study was to evaluate the influence of Streptococcus mutans on the corrosion of titanium. Methods S. mutans biofilms were formed on commercially pure titanium (CP-Ti) square samples (10 mm × 10 mm × 1 mm) using a culture medium enriched with sucrose. Open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) measurements were used to evaluate the corrosion behaviour of CP-Ti in the presence of S. mutans in Fusayama's artificial saliva. The corrosion of biofilm-free CP-Ti samples was also evaluated in artificial saliva. Biofilms biomass was measured by spectrophotometry, using crystal violet staining, after 1, 2 and 7 days. Results The OCP values recorded on CP-Ti in the presence of S. mutans (−0.3 ± 0.02 V vs. SCE) was lower than those on biofilm-free CP-Ti (−0.1 ± 0.01 V vs. SCE) after 2 h of immersion in artificial saliva (p < 0.05). That reveals a high reactivity of titanium in presence of S. mutans. Impedance spectra revealed the formation of a compact passive film on titanium in artificial saliva or in the presence of a 2 days old S. mutans biofilm even though the corrosion resistance of CP-Ti has decreased in presence of a S. mutans biofilm. Conclusion The presence of bacterial colonies, such as S. mutans, negatively affected the corrosion resistance of the titanium.The authors acknowledge the financial support provided by Alban Programme (cod. E06D103407BR), the Erasmus Student Exchange Programme of the CEC, FCT (PTDC/CTM/67500/2006) and the Scientific Research Community on Surface Modification of Materials funded by the Flemish Science Foundation (WOG-FWO-Vlaanderen)

Heat Treated NiP–SiC Composite Coatings: Elaboration and Tribocorrosion Behaviour in NaCl Solution

Tribocorrosion behaviour of heat-treated NiP and NiP–SiC composite coatings was investigated in a 0.6 M NaCl solution. The tribocorrosion tests were performed in a linear sliding tribometer with an electrochemical cell interface. It was analyzed the influence of SiC particles dispersion in the NiP matrix on current density developed, on coefficient of friction and on wear volume loss. The results showed that NiP–SiC composite coatings had a lower wear volume loss compared to NiP coatings. However, the incorporation of SiC particles into the metallic matrix affects the current density developed by the system during the tribocorrosion test. It was verified that not only the volume of co-deposited particles (SiC vol.%) but also the number of SiC particles per coating area unit (and consequently the SiC particles size) have made influence on the tribocorrosion behaviour of NiP–SiC composite coatings

Corrosion behaviour of porous Ti intended for biomedical applications

Porous Ti implants are being developed inorder to reduce the biomechanical mismatch between theimplant and the bone, as well as increasing the osseointegrationby improving the bone in-growth. Most of the focusin the literature has been on the structural, biological andmechanical characterization of porous Ti whereas there islimited information on the electrochemical characterization.Therefore, the present work aims to study the corrosionbehaviour of porous Ti having 30 and 50 % ofnominal porosity, produced by powder metallurgy routeusing the space holder technique. The percentage, size anddistribution of the pores were determined by image analysis.Electrochemical tests consisting of potentiodynamicpolarization and electrochemical impedance spectroscopywere performed in 9 g/L NaCl solution at body temperature.Electrochemical studies revealed that samples presenteda less stable oxide film at increased porosity, morespecifically, the complex geometry and the interconnectivityof the pores resulted in formation of less protectiveoxide film in the pores.This study was supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 – Programa Operacional Competitividade e Internacionalizac¸a˜o (POCI) with the reference project POCI-01-0145- FEDER-006941, Programa de Acc¸o˜es Universita´rias Integradas LusoFrancesas’ (PAUILF TC-12_14), and The Calouste Gulbenkian Foundation through ‘‘Programa de Mobilidade Acade´mica para Professores’’. The authors would also like to acknowledge Prof. Ana Senos (University of Aveiro) and Prof. Jose´ Carlos Teixeira (University of Minho) for the provision of the characterization facilities.info:eu-repo/semantics/publishedVersio

Wear and corrosion interactions on titanium in oral environment : literature review

The oral cavity is a complex environment where corrosive substances from dietary, human saliva, and oral biofilms may accumulate in retentive areas of dental implant systems and prostheses promoting corrosion at their surfaces. Additionally, during mastication, micromovements may occur between prosthetic joints causing a relative motion between contacting surfaces, leading to wear. Both processes (wear and corrosion) result in a bio-tribocorrosion system once that occurs in contact with biological tissues and fluids. This review paper is focused on the aspects related to the corrosion and wear behavior of titanium-based structures in the oral environment. Furthermore, the clinical relevance of the oral environment is focused on the harmful effect that acidic substances and biofilms, formed in human saliva, may have on titanium surfaces. In fact, a progressive degradation of titanium by wear and corrosion (tribocorrosion) mechanisms can take place affecting the performance of titanium-based implant and prostheses. Also, the formation of wear debris and metallic ions due to the tribocorrosion phenomena can become toxic for human tissues. This review gathers knowledge from areas like materials sciences, microbiology, and dentistry contributing to a better understanding of bio-tribocorrosion processes in the oral environment.(undefined