8,090 research outputs found

    Fluoride Release from Two High-Viscosity Glass Ionomers after Exposure to Fluoride Slurry and Varnish

    Get PDF
    The effect of brushing with different fluoride slurries on the fluoride release (FR) of different high-viscosity glass ionomer cements (GICs) was investigated. Fifty-eight discs were fabricated from two high-viscosity GICs (GC Fuji IX (F9) and 3M ESPE Ketac-fil (KF)). Five specimens from each brand were used to measure Vickers microhardness and the remaining were randomly assigned to one of four groups (n = 6) based on two-factor combinations: (1) fluoride concentration in the abrasive slurry (275 or 1250 ppm fluoride as NaF) and (2) immersion in a 22,500 ppm fluoride-containing solution. Specimens were brushed for a total of 20,000 strokes over 4 days with daily FR measurement. Data were analyzed using analysis of variance and Bonferroni tests (α = 0.05). Baseline FR and microhardness values were different between the two tested material brands. Exposure to a 22,500 ppm solution was associated with higher FR but not the exposure to 1250 ppm slurries. Brushing and immersion of glass ionomer cements in a 22,500 ppm F solution led to higher FR that was more sustained for KF. Type of the glass ionomer, progressive brushing, and fluoride varnish affected FR but not the fluoride content in the abrasive slurry

    Control system for hunger and its implications in animals and man

    Get PDF
    No description supplie

    Analysis of geometry and design point performance of axial flow turbines. 1 - Development of the analysis method and the loss coefficient correlation

    Get PDF
    Stream-filament analysis procedure and correlation of total pressure loss coefficients to form basis of computer program to investigate design point performance of axial turbine

    Alarm-Based Prescriptive Process Monitoring

    Full text link
    Predictive process monitoring is concerned with the analysis of events produced during the execution of a process in order to predict the future state of ongoing cases thereof. Existing techniques in this field are able to predict, at each step of a case, the likelihood that the case will end up in an undesired outcome. These techniques, however, do not take into account what process workers may do with the generated predictions in order to decrease the likelihood of undesired outcomes. This paper proposes a framework for prescriptive process monitoring, which extends predictive process monitoring approaches with the concepts of alarms, interventions, compensations, and mitigation effects. The framework incorporates a parameterized cost model to assess the cost-benefit tradeoffs of applying prescriptive process monitoring in a given setting. The paper also outlines an approach to optimize the generation of alarms given a dataset and a set of cost model parameters. The proposed approach is empirically evaluated using a range of real-life event logs

    Intraspecific genetic variation in complex assemblages from mitochondrial metagenomics: comparison with DNA barcodes

    Get PDF
    Metagenomic shotgun sequencing, using Illumina technology, and de novo genome assembly of mixed field-collected amples of invertebrates readily produce mitochondrial genome sequences, allowing rapid identification and quantification of species diversity. However, intraspecific genetic variability present in the specimen pools is lost during mitogenome assembly, which limits the utility of ‘mitochondrial metagenomics’ for studies of population diversity. 2. Using 10 natural communities (>2600 individuals) of leaf beetles (Chrysomelidae), DNA variation in the mitochondrial cox1-5’ ‘barcode’ was compared for Sanger sequenced individuals and Illumina shotgun sequenced specimen pools. 3. Generally, only a single mitochondrial contig was assembled per species, even in the presence of intraspecific variation. Ignoring ambiguity from the use of two different assemblers, the cox1 barcode regions from these assemblies were exact nucleotide matches of a Sanger sequenced barcode in 90.7% of cases, which dropped to 76.0% in assemblies from samples with large intra and interspecific variability. Nucleotide differences between barcodes from both data types were almost exclusively in synonymous 3rd codon position, although the number of affected sites was very low, and the greatest discrepancies were correlated with poor quality of Sanger sequences. 4. Unassembled shotgun reads were also used to score single nucleotide polymorphisms and to calculate intraspecific nucleotide diversity (pi) for all available populations at each site. These values correlated with Sanger sequenced cox1 variation but were significantly higher. 5. Overall, the assemblage-focused shotgun sequencing of pooled samples produced nucleotide variation data comparable to the well-established specimen-focused Sanger approach. The findings thus extend the application of mitochondrial metagenomics of complex biodiversity samples to the estimation of diversity below the species level

    Analysis of geometry and design point performance of axial flow turbines. Part 2 - Computer program

    Get PDF
    Computer program for solving equations governing flow in axial turbine

    Metagenome skimming of insect specimen pools: potential for comparative genomics

    Get PDF
    Metagenomic analyses are challenging in metazoans, but high-copy number and repeat regions can be assembled from lowcoverage sequencing by “genome skimming,” which is applied here as a new way of characterizing metagenomes obtained in an ecological or taxonomic context. Illumina shotgun sequencing on two pools of Coleoptera (beetles) of approximately 200 species each were assembled into tens of thousands of scaffolds. Repeated low-coverage sequencing recovered similar scaffold sets consistently, although approximately 70% of scaffolds could not be identified against existing genome databases. Identifiable scaffolds included mitochondrial DNA, conserved sequences with hits to expressed sequence tag and protein databases, and knownrepeatelementsof high and low complexity, includingnumerous copies ofrRNAandhistone genes.Assemblies of histones captured a diversity of gene order and primary sequence in Coleoptera. Scaffolds with similarity to multiple sites in available coleopteran genome sequences for Dendroctonus and Tribolium revealed high specificity of scaffolds to either of these genomes, in particular for high-copy number repeats. Numerous “clusters” of scaffolds mapped to the same genomic site revealed intraand/or intergenomic variation within a metagenome pool. In addition to effect of taxonomic composition of the metagenomes, the number of mapped scaffolds also revealed structural differences between the two reference genomes, although the significance of this striking finding remains unclear. Finally, apparently exogenous sequences were recovered, including potential food plants, fungal pathogens, and bacterial symbionts. The “metagenome skimming” approach is useful for capturing the genomic diversity of poorly studied, species-rich lineages and opens new prospects in environmental genomic

    Facility for fast neutron irradiation tests of electronics at the ISIS spallation neutron source

    Get PDF
    The VESUVIO beam line at the ISIS spallation neutron source was set up for neutron irradiation tests in the neutron energy range above 10 MeV. The neutron flux and energy spectrum were shown, in benchmark activation measurements, to provide a neutron spectrum similar to the ambient one at sea level, but with an enhancement in intensity of a factor of 107. Such conditions are suitable for accelerated testing of electronic components, as was demonstrated here by measurements of soft error rates in recent technology field programable gate arrays

    Recruitment Facilitation and Spatial Pattern Formation in Soft-Bottom Mussel Beds

    Full text link
    Mussels (Mytilus edulis) build massive, spatially complex, biogenic structures that alter the biotic and abiotic environment and provide a variety of ecosystem services. Unlike rocky shores, where mussels can attach to the primary substrate, soft sediments are unsuitable for mussel attachment. We used a simple lattice model, field sampling, and field and laboratory experiments to examine facilitation of recruitment (i.e., preferential larval, juvenile, and adult attachment to mussel biogenic structure) and its role in the development of power-law spatial patterns observed in Maine, USA, soft-bottom mussel beds. The model demonstrated that recruitment facilitation produces power-law spatial structure similar to that in natural beds. Field results provided strong evidence for facilitation of recruitment to other mussels—they do not simply map onto a hard-substrate template of gravel and shell hash. Mussels were spatially decoupled from non-mussel hard substrates to which they can potentially recruit. Recent larval recruits were positively correlated with adult mussels, but not with other hard substrates. Mussels made byssal thread attachments to other mussels in much higher proportions than to other hard substrates. In a field experiment, mussel recruitment was highest to live mussels, followed by mussel shell hash and gravel, with almost no recruitment to muddy sand. In a laboratory experiment, evenly dispersed mussels rapidly self-organized into power-law clusters similar to those observed in nature. Collectively, the results indicate that facilitation of recruitment to existing mussels plays a major role in soft-bottom spatial pattern development. The interaction between large-scale resource availability (hard substrate) and local-scale recruitment facilitation may be responsible for creating complex power-law spatial structure in soft-bottom mussel beds

    Soup to tree: the phylogeny of beetles inferred by mitochondrial metagenomics of a Bornean rainforest sample

    Get PDF
    In spite of the growth of molecular ecology, systematics and next-generation sequencing, the discovery and analysis of diversity is not currently integrated with building the tree-of-life. Tropical arthropod ecologists are well placed to accelerate this process if all specimens obtained via masstrapping, many of which will be new species, could be incorporated routinely in phylogeny reconstruction. Here we test a shotgun sequencing approach, whereby mitochondrial genomes are assembled from complex ecological mixtures via mitochondrial metagenomics, and demonstrate how the approach overcomes many of the taxonomic impediments to the study of biodiversity. DNA from ~500 beetle specimens, originating from a single rainforest canopy fogging sample from Borneo, was pooled and shotgun sequenced, followed by de novo assembly of complete and partial mitogenomes for 175 species. The phylogenetic tree obtained from this local sample was highly similar to that from existing mitogenomes selected for global coverage of major lineages of Coleoptera. When all sequences were combined, only minor topological changes are induced against this reference set, indicating an increasingly stable estimate of coleopteran phylogeny, whilst the ecological sample expands the tip-level representation of several lineages. Robust trees generated from ecological samples now enable an evolutionary framework for ecology. Meanwhile, the inclusion of uncharacterized samples in the tree-of-life rapidly expands taxon and biogeographic representation of lineages without morphological identification. Mitogenomes from shotgun sequencing of unsorted environmental samples and their associated metadata, placed robustly into the phylogenetic tree, constitute novel DNA ‘superbarcodes’ for testing hypotheses regarding global patterns of diversity
    • 

    corecore