Testing the relations of gelotophobia with humour as a coping strategy, self-ascribed loneliness, reflectivity, attractiveness, self-acceptance, and life expectations

Gelotophobia (the fear of being laughed at) was studied in a sample of N = 1,322 Danish adolescents aged 11 to 16. When using a measure of coping humour in three different respects (using humour (1) to overcome uncertainty and stress, (2) in relation to aggression and sexuality, and (3) to get cheered up), it was indicated that the fear of being laughed at existed independently from the use of humour as a coping strategy. It is suggested that interventions targeting the positive use of laughter and humour may have a potential for increasing the well-being of adolescents with high levels of the fear of being laughed at. In single item ratings higher levels of gelotophobia were associated with greater self-ascribed loneliness, lower perceived attractiveness, lower self-acceptance, and rather negative life expectancies. Findings are discussed in the light of current literature and with respect to potential implications for the school life of adolescents

Optical properties of Southern Hemisphere aerosols: Report of the joint CSIRO/NASA study

This study was made in support of the LAWS and GLOBE programs, which aim to design a suitable Doppler lidar system for measuring global winds from a satellite. Observations were taken from 5 deg S to 45 deg S along and off the E and SE Australian coast, thus obtaining representative samples over a large latitude range. Observations were made between 0 and 6 km altitude of aerosol physical and chemical properties in situ from the CSIRO F-27 aircraft; of lidar backscatter coefficients at 10.6 micron wavelength from the F-27 aircraft; of lidar backscatter profiles at 0.694 microns at Sale, SE Australia; and of lidar backscatter profiles at 0.532 microns at Cowley Beach, NE Australia. Both calculations and observations in the free troposphere gave a backscatter coefficient of 1-2 x 10 to the -11/m/sr at 10.6 microns, although the accuracies of the instruments were marginal at this level. Equivalent figures were 2-8 x 10 to the -9/m/sr (aerosol) and 9 x 10 to the -9 to 2 x 10 to the -8/m/sr (lidar) at 0.694 microns wavelength at Sale; and 3.7 x 10 to the -9/m/sr (aerosol) and 10 to the -8 to 10 to the -7/m/sr (lidar) at 0.532 microns wavelength at Cowley Beach. The measured backscatter coefficients at 0.694 and 0.532 microns were consistently higher than the values calculated from aerosol size distributions by factors of typically 2 to 10

Transient evoked otoacoustic emissions testing for screening of sensorineural deafness in puppies

<p><b>Background:</b> Transient evoked otoacoustic emissions (TEOAE) are widely used for human neonatal deafness screening, but have not been reported for clinical use in dogs.</p> <p><b>Hypothesis/Objectives:</b> To investigate the feasibility of TEOAE testing in conscious puppies and the ability of TEOAE testing to correctly identify deaf and hearing ears, as defined by brainstem auditory evoked response (BAER).</p> <p><b>Animals:</b> Forty puppies from 10 litters.</p> <p><b>Methods:</b> Prospective study on puppies presented for hearing assessment as part of a congenital deafness BAER screening program. Hearing status was determined using BAER. TEOAE testing was performed after the BAER assessment and the results of the TEOAE testing were compared with the hearing status for each ear. Parameters were tested for normality using the D'Agostino Pearson test and comparisons between the deaf and hearing ears were made using Mann-Whitney tests.</p> <p><b>Results:</b> TEOAE testing was readily performed in puppies presented for congenital deafness screening. Using analysis parameters based on those used in human neonatal hearing screening, TEOAE testing correctly identified all deaf ears, as defined by BAER testing, with a sensitivity of 100% (95% CI: 56-100%) for diagnosing deafness and specificity of 78% (95% CI: 66-87%).</p> <p><b>Conclusions and Clinical Importance:</b> TEOAE testing is an effective screening modality for identifying congenital sensorineural deafness in dogs. In light of the simpler and less expensive equipment, TEOAE testing has the potential to improve access to hearing screening and through this reduce the prevalence of congenital deafness in the dog.</p&gt

New methods for the calibration of optical resonators : integrated calibration by means of optical modulation (ICOM) and narrow-band cavity ring-down (NB-CRD)

Optical resonators are used in spectroscopic measurements of atmospheric trace gases to establish long optical path lengths L with enhanced absorption in compact in-struments. In cavity-enhanced broad-band methods, the ex-act knowledge of both the magnitude of L and its spectral dependency on the wavelength lambda is fundamental for the correct retrieval of trace gas concentrations. L(lambda) is connected to the spectral mirror reflectivity R (lambda), which is often referred to instead. L(lambda) is also influenced by other quantities like broad-band absorbers or alignment of the optical resonator. The established calibration techniques to determine L(lambda), e.g. introducing gases with known optical properties or measuring the ring-down time, all have limitations: limited spectral resolution, insufficient absolute accuracy and precision, inconvenience for field deployment, or high cost of implementation. Here, we present two new methods that aim to overcome these limitations: (1) the narrow-band cavity ring-down (NB-CRD) method uses cavity ring-down spectroscopy and a tunable filter to retrieve spectrally resolved path lengths L(lambda); (2) integrated calibration by means of op-tical modulation (ICOM) allows the determination of the op-tical path length at the spectrometer resolution with high ac-curacy in a relatively simple setup. In a prototype setup we demonstrate the high accuracy and precision of the new approaches. The methods facilitate and improve the determination of L(lambda), thereby simplifying the use of cavity-enhanced absorption spectroscopy.Peer reviewe

Novel Use of a Social-Media-Based Survey to Detect Regional Differences in Management of Monochorionic-Diamniotic Twins.

ObjectiveThis study aims to evaluate the utility of social media to distribute a patient survey on differences in management and outcomes of monochorionic-diamniotic (MCDA) pregnancies.Study designA cross-sectional survey was posted to an English-language MCDA twins patient-centered support group within the social media site, Facebook from April 2, 2018 to June 26, 2018. Subjects were recruited through a technique called "snowballing," whereby individuals shared the survey to assist with recruiting. Patient reported data were analyzed using Chi-square and Kruskal-Wallis's tests to explore characteristics associated with surveillance and outcomes as related to region and provider type.ResultsOver 3 months, the post "reached" 14,288 Facebook users, among which 5,653 (40%) clicked on the post. A total of 2,357 respondents with MCDA pregnancies completed the survey. Total 1,928 (82%) were from the United States (US) and 419 (18%) from other countries. Total 85% of patients had co-management with maternal-fetal medicine (MFM), more in the US compared with the rest of the world (87 vs. 74%, p < 0.01). MFM involvement led to increased adherence to biweekly ultrasounds (91 vs. 65%, p < 0.01), diagnosis of monochorionicity by 12 weeks (74 vs. 69%, p < 0.01) and better education about twin-twin transfusion syndrome (90 vs. 66%, p < 0.01). Pregnancies with MFM involvement had a higher take-home baby rate for both babies (92 vs. 89%, p < 0.01) or for at least one baby (98 vs. 93%, p < 0.01) compared with those without MFM involvement.ConclusionA survey distributed via social media can be effective in evaluating real-life management and outcomes of an uncommon obstetrical diagnosis. This survey elucidates wide international variation in adherence to guidelines, management, and outcomes

Phalange Tactile Load Cell

A tactile load cell that has particular application for measuring the load on a phalange in a dexterous robot system. The load cell includes a flexible strain element having first and second end portions that can be used to mount the load cell to the phalange and a center portion that can be used to mount a suitable contact surface to the load cell. The strain element also includes a first S-shaped member including at least three sections connected to the first end portion and the center portion and a second S-shaped member including at least three sections coupled to the second end portion and the center portion. The load cell also includes eight strain gauge pairs where each strain gauge pair is mounted to opposing surfaces of one of the sections of the S-shaped members where the strain gauge pairs provide strain measurements in six-degrees of freedom

Interactive robot control system and method of use

A robotic system includes a robot having joints, actuators, and sensors, and a distributed controller. The controller includes command-level controller, embedded joint-level controllers each controlling a respective joint, and a joint coordination-level controller coordinating motion of the joints. A central data library (CDL) centralizes all control and feedback data, and a user interface displays a status of each joint, actuator, and sensor using the CDL. A parameterized action sequence has a hierarchy of linked events, and allows the control data to be modified in real time. A method of controlling the robot includes transmitting control data through the various levels of the controller, routing all control and feedback data to the CDL, and displaying status and operation of the robot using the CDL. The parameterized action sequences are generated for execution by the robot, and a hierarchy of linked events is created within the sequence