Absorbance enhancement in microplate wells for improved-sensitivity biosensors

A generic optical biosensing strategy was developed that relies on the absorbance enhancement phenomenon occurring in a multiple scattering matrix. Experimentally, inserts made of glass fiber membrane were placed into microplate wells in order to significantly lengthen the trajectory of the incident light through the sample and therefore increase the corresponding absorbance. Enhancement factor was calculated by comparing the absorbance values measured for a given amount of dye with and without the absorbance-enhancing inserts in the wells. Moreover, the dilution of dye in solutions with different refractive indices (RI) clearly revealed that the enhancement factor increased with the ΔRI between the membrane and the surrounding medium, reaching a maximum value (EF>25) when the membranes were dried. On this basis, two H2O2-biosensing systems were developed based on the biofunctionalization of the glass fiber inserts either with cytochrome c or horseradish peroxidase (HRP) and the analytical performances were systematically compared with the corresponding bioassay in solution. The efficiency of the absorbance-enhancement approach was particularly clear in the case of the cytochrome c-based biosensor with a sensitivity gain of 40 folds and wider dynamic range. Therefore, the developed strategy represents a promising way to convert standard colorimetric bioassays into optical biosensors with improved sensitivity

Ex vivo human skin permeation of methylchloroisothiazolinone (MCI) and methylisothiazolinone (MI).

Methylchloroisothiazolinone (MCI) and methylisothiazolinone (MI) are biocides used in many types of products such as cosmetics, paints, and cleaning agents. Skin contact is often encountered when using these products. Although MCI and MI are strong allergens and cause skin irritation, no scientific skin permeation study has been reported except for some unpublished data. Therefore, this study assessed the permeation of MCI and MI both separately and as a mixture through freshly dermatomed human skin (800 µm) in a flow-through diffusion cell system. Different concentrations of aqueous standards (1.5/1, 70/50, 150/35, and 750/175 µg/mL of MCI/MI) and various commercial products were assessed after 15-20 h of exposure. In parallel, the dose-dependent irritant effects of MCI/MI and MI were estimated by histology following 6- or 24-h exposure. Overall results show that MI in formulations or in aqueous standard solutions quickly permeated the skin with time lags less than 15 min while MCI was much slower (>3.5 h). MCI in formulations had permeation rates up to five times greater than that for MI in the same product, and in two tested creams were not found to permeate skin. Some signs of irritation were observed by histology; especially at the highest MCI/MI concentrations (750/250 µg/mL) in aqueous solutions. This confirms that MCI reacts readily with skin and may induce local irritation. The MCI and MI permeations are also greatly influenced by the topical vehicle. It is, therefore, more relevant to test exposures to formulations than aqueous standard solutions

Drug vaping applied to cannabis: Is "Cannavaping" a therapeutic alternative to marijuana?

Therapeutic cannabis administration is increasingly used in Western countries due to its positive role in several pathologies. Dronabinol or tetrahydrocannabinol (THC) pills, ethanolic cannabis tinctures, oromucosal sprays or table vaporizing devices are available but other cannabinoids forms can be used. Inspired by the illegal practice of dabbing of butane hashish oil (BHO), cannabinoids from cannabis were extracted with butane gas, and the resulting concentrate (BHO) was atomized with specific vaporizing devices. The efficiency of "cannavaping," defined as the "vaping" of liquid refills for e-cigarettes enriched with cannabinoids, including BHO, was studied as an alternative route of administration for therapeutic cannabinoids. The results showed that illegal cannavaping would be subjected to marginal development due to the poor solubility of BHO in commercial liquid refills (especially those with high glycerin content). This prevents the manufacture of liquid refills with high BHO concentrations adopted by most recreational users of cannabis to feel the psychoactive effects more rapidly and extensively. Conversely, "therapeutic cannavaping" could be an efficient route for cannabinoids administration because less concentrated cannabinoids-enriched liquid refills are required. However, the electronic device marketed for therapeutic cannavaping should be carefully designed to minimize potential overheating and contaminant generation

Cyclododecane exposure in the field of conservation and restoration of art objects

PURPOSE: Recent work practices in the conservation and restoration involve the use of cyclododecane (CDD, CAS 294-62-2) to protect fragile artifacts during their handling or transportation. Little is known about its toxicity, and no previous exposure has been reported. A short field investigation was conducted to characterize the exposure conditions to both CDD vapors and aerosols.METHODS: Measurements were conducted in the laboratory of conservation and restoration of the archeological service in Bern (Switzerland). Three indoor and four outdoor typical work situations, either during brush or spray gun applications, were investigated. Measurements were performed on charcoal adsorbent tube and analyzed by a gas chromatograph equipped with a flame ionization detector.RESULTS: Measurements have been conducted during both brush and spray gun applications. Indoor exposures were of 0.75-15.5 mg/m(3), while outdoors exposures were 19.5-53.9 mg/m(3). Exposures appear to be extremely localized due to both physicochemical properties and application methods of the CDD. Vapor exposure increases dramatically with the confinement of the workplace.CONCLUSION: Preventive measures should be undertaken to limit as much as possible these exposures. Field work in confined areas (ditches, underground) is of particular concern. CDD-coated artifacts or materials should be stored in ventilated areas to avoid delayed exposures. [Authors]]]> Air Pollutants, Occupational ; Cyclododecanes ; Art ; Inhalation Exposure ; Occupational Exposure ; Environmental Monitoring ; Occupational Diseases ; Volatilization ; eng https://serval.unil.ch/resource/serval:BIB_7CBB5E92B108.P001/REF.pdf http://nbn-resolving.org/urn/resolver.pl?urn=urn:nbn:ch:serval-BIB_7CBB5E92B1080 info:eu-repo/semantics/altIdentifier/urn/urn:nbn:ch:serval-BIB_7CBB5E92B1080 info:eu-repo/semantics/acceptedVersion info:eu-repo/semantics/openAccess Copying allowed only for non-profit organizations https://serval.unil.ch/disclaimer application/pdf oai:serval.unil.ch:BIB_7CBC5769DF5C 2022-05-07T01:21:12Z <oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd"> https://serval.unil.ch/notice/serval:BIB_7CBC5769DF5C Chirurgie [Surgery]. info:eu-repo/semantics/altIdentifier/pmid/23409643 Roulin, D. Hübner, M. Demartines, N. info:eu-repo/semantics/review article 2013 Revue Médicale Suisse, vol. 9, no. 369, pp. 96-99 info:eu-repo/semantics/altIdentifier/pissn/1660-9379 urn:issn:1660-9379 <![CDATA[In 2012, an innovative approach for staged in situ liver transection was proposed that could allow for even more aggressive major hepatectomies. Otherwise, after 25 years, laparoscopy became "traditional" and other minimally invasive techniques continue to be developed but their indications deserve further investigation. Less aggressive treatment in non-complicated diverticulitis becomes more popular, and even antibiotic treatment has been challenged by a randomized study. In colorectal oncology, local resection or observation only seems to become a valuable approach in selected patients with complete response after neo adjuvant chemoradiation. Finally, enhanced recovery pathways (ERAS) have been validated and is increasingly accepted for colorectal surgery and ERAS principles are successfully applied in other surgical fields

Frequent Occupational Exposure to Fusarium Mycotoxins of Workers in the Swiss Grain Industry

Type B trichotecens such as deoxynivalenol (DON), 3-acetyldeoxynivalenol (3-ADON), 15-acetyldeoxynivalenol (15-ADON), nivalenol (NIV) and zearalenone (ZEN) are mycotoxins contaminating wheat and wheat dust. Mycotoxins are toxic upon ingestion and considered potentially toxic when inhaled. Whereas dietary exposure to mycotoxins is controlled in food, data on occupational exposure by inhalation by grain workers are scarce. The objectives of this study were to determine the incidence of DON, 3-ADON, 15-ADON, NIV and ZEN in aerosols generated during grain harvesting and unloading and the risk of exposure of grain workers. Aerosols were collected during the threshing of 78 winter wheat fields and grain unloading of 59 grain lots in six grain terminals in the Vaud region (Switzerland). The samples represented the diversity of the winter wheat cultivar and of the farming system (88 treated with fungicides, 46 untreated). Using a HPLC MS/MS method developed to quantify mycotoxins in aerosols, we report that the mycotoxin content of aerosols was not affected by the wheat cultivars or farming system, but that the incidence of the mycotoxins differed between activities. While wheat harvesting generated on average 28, 20 and 1 ng·m−3 of DON, NIV and ZEN, respectively, grain unloading generated 53, 46 and 4 ng·m−3. Personal sampling revealed that working in a cab was an efficient protective measure. However, it was not sufficient to avoid chronic exposure to multiple mycotoxins. The most exposed activity was the cleaning, exposing workers to DON, NIV and ZEN at concentrations as high as 65, 59 and 3 ng·m−3. These data provide valuable information for future studies of mycotoxin toxicity at relevant concentrations on respiratory health

A simple gas chromatography method for the analysis of monoethanolamine in air

A simple method determining airborne monoethanolamine has been developed. Monoethanolamine determination has traditionally been difficult due to analytical separation problems. Even in recent sophisticated methods, this difficulty remains as the major issue often resulting in time-consuming sample preparations. Impregnated glass fiber filters were used for sampling. Desorption of monoethanolamine was followed by capillary GC analysis and nitrogen phosphorous selective detection. Separation was achieved using a specific column for monoethanolamines (35% diphenyl and 65% dimethyl polysiloxane). The internal standard was quinoline. Derivatization steps were not needed. The calibration range was 0.5-80 μg/mL with a good correlation (R(2) = 0.996). Averaged overall precisions and accuracies were 4.8% and -7.8% for intraday (n = 30), and 10.5% and -5.9% for interday (n = 72). Mean recovery from spiked filters was 92.8% for the intraday variation, and 94.1% for the interday variation. Monoethanolamine on stored spiked filters was stable for at least 4 weeks at 5°C. This newly developed method was used among professional cleaners and air concentrations (n = 4) were 0.42 and 0.17 mg/m(3) for personal and 0.23 and 0.43 mg/m(3) for stationary measurements. The monoethanolamine air concentration method described here was simple, sensitive, and convenient both in terms of sampling and analytical analysis

'Herbal' but potentially hazardous: an analysis of the constituents and smoke emissions of tobacco-free waterpipe products and the air quality in the cafes where they are served

BACKGROUND: There are limited data on the composition and smoke emissions of 'herbal' shisha products and the air quality of establishments where they are smoked. METHODS: Three studies of 'herbal' shisha were conducted: (1) samples of 'herbal' shisha products were chemically analysed; (2) 'herbal' and tobacco shisha were burned in a waterpipe smoking machine and main and sidestream smoke analysed by standard methods and (3) the air quality of six waterpipe cafes was assessed by measurement of CO, particulate and nicotine vapour content. RESULTS: We found considerable variation in heavy metal content between the three products sampled, one being particularly high in lead, chromium, nickel and arsenic. A similar pattern emerged for polycyclic aromatic hydrocarbons. Smoke emission analyses indicated that toxic byproducts produced by the combustion of 'herbal' shisha were equivalent or greater than those produced by tobacco shisha. The results of our air quality assessment demonstrated that mean PM2.5 levels and CO content were significantly higher in waterpipe establishments compared to a casino where cigarette smoking was permitted. Nicotine vapour was detected in one of the waterpipe cafes. CONCLUSIONS: 'Herbal' shisha products tested contained toxic trace metals and PAHs levels equivalent to, or in excess of, that found in cigarettes. Their mainstream and sidestream smoke emissions contained carcinogens equivalent to, or in excess of, those of tobacco products. The content of the air in the waterpipe cafes tested was potentially hazardous. These data, in aggregate, suggest that smoking 'herbal' shisha may well be dangerous to health