43 research outputs found
Recommended from our members
Evolução na utilização e nos gastos de uma operadora de saúde
Brazil’s aging population and the rising number of people reliant upon the country’s supplementary healthcare system have elicited the concern of public and private managers regarding the increase in healthcare costs. In this paper, the costs per gender, per type of medical expenses and per age group of a major Brazilian self-managed healthcare provider between 2007 and 2013 were analyzed. This healthcare provider is of interest because, besides portraying a single condition of revenue growth restricted to the existing contributors, it also replicates the demographic profile expected for Brazil in 2050, when approximately one-third of its population will be over 60 years of age. The analyses confirm the current literature as they show an increase in healthcare plan usage by the elderly and the difference between admission rates by gender. They also reveal an increase in average length of stay in hospital and the increase in medical costs far above inflation, especially for materials and medicines. It is hoped that this study will help scholars and others interested in comparisons of medical expense trends, especially by age and sex, and that it encourages further collaboration on the sustainability of health insurance providers in Brazil
Synthesis by coprecipitation of india-stabilized zirconia and codoping with MoO3, WO3, TaO2.5, or NbO2.5 for application as thermal barrier coatings
Changes in catastrophizing and kinesiophobia are predictive of changes in disability and pain after treatment in patients with anterior knee pain
Purpose. The purpose of the study was to investigate if changes in psychological variables are related to the outcome in pain and disability in patients with chronic anterior knee pain. Methods. A longitudinal observational study on 47 patients with chronic anterior knee pain was performed in a secondary healthcare setting. Pain was measured with the visual analogue scale and disability with the Lysholm scale. The psychological variables, such as anxiety, depression, pain coping strategies, catastrophizing and fear to movement beliefs, were studied by using self-administered questionnaires. Results. Among the pain coping strategies, only the catastrophizing subscale showed a significant reduction. Similarly, anxiety, depression and kinesiophobia were significantly reduced after treatment. Those patients who decreased the catastrophizing, kinesiophobia, anxiety and depression showed a greater improvement in pain and disability after a purely biomedical treatment. A multiple regression analysis revealed that changes in catastrophizing predicted the amount of improvement in pain severity and that changes in both catastrophizing and anxiety predicted changes in disability after treatment. Conclusion. What has been found suggests that clinical improvement in pain and disability is associated with a reduction in catastrophizing and kinesiophobia. Therefore, co-interventions to reduce catastrophizing thinking and kinesiophobia may enhance the results. Level of evidence. Prospective Cohort Study, Level I for prognosis
Influence of Psychological Factors on Pain and Disability in Anterior Knee Pain Patients
AKP patients express chronic pain but also disability. However, the correlation between pain and disability is not complete and linear. Some patients with a lot of pain show mild disability while others with much less pain also show great disability. The disability is profoundly influenced by other emotional and cognitive factors that are associated with the perception of pain. Therefore, the clinical efforts do not have to be focused only on treating the pain as a feeling but on identifying and modifying these factor
Patellofemoral pain syndrome (PFPS): a systematic review of anatomy and potential risk factors
Patellofemoral Pain Syndrome (PFPS), a common cause of anterior knee pain, is successfully treated in over 2/3 of patients through rehabilitation protocols designed to reduce pain and return function to the individual. Applying preventive medicine strategies, the majority of cases of PFPS may be avoided if a pre-diagnosis can be made by clinician or certified athletic trainer testing the current researched potential risk factors during a Preparticipation Screening Evaluation (PPSE). We provide a detailed and comprehensive review of the soft tissue, arterial system, and innervation to the patellofemoral joint in order to supply the clinician with the knowledge required to assess the anatomy and make recommendations to patients identified as potentially at risk. The purpose of this article is to review knee anatomy and the literature regarding potential risk factors associated with patellofemoral pain syndrome and prehabilitation strategies. A comprehensive review of knee anatomy will present the relationships of arterial collateralization, innervations, and soft tissue alignment to the possible multifactoral mechanism involved in PFPS, while attempting to advocate future use of different treatments aimed at non-soft tissue causes of PFPS
α-Pyrone Derivatives from a Streptomyces Strain Resensitize Tamoxifen Resistance in Breast Cancer Cells
Influence of energy density of different light sources on knoop hardness of a dual-cured resin cement
The purpose of this study was to evaluate the Knoop hardness of a dual-cured resin-based luting cement irradiated with different light sources as well energy density through a ceramic sample. Three light-curing unit (LCUs) were tested: tungsten halogen light (HAL), light-emitting diode (LED) and xenon plasma-arc (PAC) lamp. Disc-shaped specimens were fabricated from a resin-based cement (Enforce). Three energy doses were used by modifying the irradiance (I) of each LCU and the irradiation time (T): 24 Jcm-2 (I/2x2T), 24 Jcm-2 (IxT) and 48 Jcm-2 (Ix2T). Energy doses were applied through a 2.0-mm-thick ceramic sample (Duceram Plus). Three groups underwent direct irradiation over the resin cement with the different LCUs and a chemically-activated group served as a control. Thirteen groups were tested (n=10). Knoop hardness number (KHN) means were obtained from cross-sectional areas. Two-way ANOVA and the Holm-Sidak method were used for statistical comparisons of activation mode and energy doses (a=5%). Application of 48 J.cm-2 energy dose through the ceramic using LED (50.5±2.8) and HAL (50.9±3.7) produced significantly higher KHN means (p<0.05) than the control (44.7±3.8). LED showed statistically similar performance to HAL. Only HAL showed a relationship between the increase of LCU energy dose and hardness increase
Análise do movimento inicial de molares superiores submetidos a forças extrabucais: estudo 3D Analysis of initial movement of maxillary molars submitted to extraoral forces: a 3D study
OBJETIVO: analisar pelo método dos elementos finitos o deslocamento dos molares superiores frente a três diferentes inclinações do arco externo do aparelho extrabucal na tração do tipo cervical. MÉTODOS: maxila, dentes montados em má oclusão de Classe II e aparelho foram modelados através de formulação variacional e seus valores reproduzidos em coordenadas X, Y e Z. Foram realizadas simulações em microcomputador tipo PC, utilizando o programa ANSYS versão 8.1. Cada modelo de arco externo reproduziu linhas de força que passaram (1) acima (AcCR), (2) abaixo (AbCR) e (3) no centro de resistência (CR) do molar permanente superior de um mesmo modelo portador de má oclusão de Classe II. A avaliação restringiu-se ao movimento inicial dos molares frente à força extrabucal de 4 Newtons. RESULTADOS: o movimento distal inicial dos molares, tendo como ponto de referência a mesial do tubo, foi maior na coroa do modelo AbCR (0,47x10-6), e maior na raiz do modelo AcCR (0,32x10-6), provocando inclinações da coroa para distal e mesial, respectivamente. No modelo CR, os pontos na coroa (0,15x10-6) e raiz (0,12x10-6) deslocaram-se para distal equilibradamente, resultando em movimento de translação. Em todos os modelos, numa vista oclusal, houve tendência de rotação distal inicial da coroa, porém no modelo CR esse movimento foi muito pequeno. No sentido vertical (Z), todos os modelos revelaram movimento extrusivo (AbCR= 0,18x10-6; CR= 0,62x10-6; AcCR= 0,72x10-6). CONCLUSÃO: a simulação computacional do uso de aparelho extrabucal com tração cervical revelou a ocorrência de movimento extrusivo e distal, podendo ser por inclinação distal de coroa, de raiz ou movimento de translação.<br>OBJECTIVE: To analyze maxillary molar displacement by applying three different angulations to the outer bow of cervical-pull headgear, using the finite element method (FEM). METHODS: Maxilla, teeth set up in Class II malocclusion and equipment were modeled through variational formulation and their values represented in X, Y, Z coordinates. Simulations were performed using a PC computer and ANSYS software version 8.1. Each outer bow model reproduced force lines that ran above (ACR) (1), below (BCR) (2) and through the center of resistance (CR) (3) of the maxillary permanent molars of each Class II model. Evaluation was limited to the initial movement of molars submitted to an extraoral force of 4 Newtons. RESULTS: The initial distal movement of the molars, using as reference the mesial surface of the tube, was higher in the crown of the BCR model (0.47x10-6) as well as in the root of the ACR (0.32x10-6) model, causing the crown to tip distally and mesially, respectively. On the CR model, the points on the crown (0.15 x10-6) and root (0.12 x10-6) moved distally in a balanced manner, which resulted in bodily movement. In occlusal view, the crowns on all models showed a tendency towards initial distal rotation, but on the CR model this movement was very small. In the vertical direction (Z), all models displayed extrusive movement (BCR 0.18 x10-6; CR 0.62 x10-6; ACR 0.72x10-6). CONCLUSIONS: Computer simulations of cervical-pull headgear use disclosed the presence of extrusive and distal movement, distal crown and root tipping, or bodily movement