749 research outputs found

    Investigating in-service failures of water pipes from a multiaxial notch fatigue point of view: A conceptual study

    Get PDF
    Many mechanisms and processes can cause deterioration and ultimately failure of water distribution pipes during in-service operation, amongst these is damage caused by metal fatigue. This paper summarises an attempt at formalising a novel methodology suitable for estimating the number of years taken for a through thickness fatigue crack to form in this complex scenario. The devised method is based on the so-called modified Wo¨hler curve method and can be applied to estimate fatigue damage of water pipes independently from the degree of multiaxiality and non-proportionality of the load history. The computational approach of the proposed fatigue life estimation technique makes full use of an incremental procedure: fatigue damage is evaluated year by year by assuming that all variable involved in the process can change over time. The detrimental effect of corrosion pits is directly accounted for by treating them as conventional notches whose size increases with time. Finally, by taking as reference information the number of years for a blowout hole to form, the proposed approach is used to show how the lifetime of grey cast iron pipes can be remarkably shortened by fatigue

    Proportional/non-proportional constant/variable amplitude multiaxial notch fatigue: cyclic plasticity, non-zero mean stresses, and critical distance/plane

    Get PDF
    This paper deals with the formulation and experimental validation of a novel fatigue lifetime estimation technique suitable for assessing the extent of damage in notched metallic materials subjected to in‐service proportional/nonproportional constant/variable amplitude multiaxial load histories. The methodology being formulated makes use of the Modified Manson‐Coffin Curve Method, the Shear Strain–Maximum Variance Method, and the elasto‐plastic Theory of Critical Distances, with the latter theory being applied in the form of the Point Method. The accuracy and reliability of our novel fatigue lifetime estimation technique were checked against a large number of experimental results we generated by testing, under proportional/nonproportional constant/variable amplitude axial‐torsional loading, V‐notched cylindrical specimens made of unalloyed medium‐carbon steel En8 (080M40). Specific experimental trials were run to investigate also the effect of non‐zero mean stresses as well as of different frequencies between the axial and torsional stress/strain components. This systematic validation exercise allowed us to demonstrate that our novel multiaxial fatigue assessment methodology is remarkably accurate, with the estimates falling within an error factor of 2. By modelling the cyclic elasto‐plastic behaviour of metals explicitly, the design methodology being formulated and validated in the present paper offers a complete solution to the problem of estimating multiaxial fatigue lifetime of notched metallic materials, with this holding true independently of sharpness of the stress/strain raiser and complexity of the load history

    A novel malaria vaccine candidate antigen expressed in Tetrahymena thermophila

    Get PDF
    Development of effective malaria vaccines is hampered by the problem of producing correctly folded Plasmodium proteins for use as vaccine components. We have investigated the use of a novel ciliate expression system, Tetrahymena thermophila, as a P. falciparum vaccine antigen platform. A synthetic vaccine antigen composed of N-terminal and C-terminal regions of merozoite surface protein-1 (MSP-1) was expressed in Tetrahymena thermophila. The recombinant antigen was secreted into the culture medium and purified by monoclonal antibody (mAb) affinity chromatography. The vaccine was immunogenic in MF1 mice, eliciting high antibody titers against both N- and C-terminal components. Sera from immunized animals reacted strongly with P. falciparum parasites from three antigenically different strains by immunofluorescence assays, confirming that the antibodies produced are able to recognize parasite antigens in their native form. Epitope mapping of serum reactivity with a peptide library derived from all three MSP-1 Block 2 serotypes confirmed that the MSP-1 Block 2 hybrid component of the vaccine had effectively targeted all three serotypes of this polymorphic region of MSP-1. This study has successfully demonstrated the use of Tetrahymena thermophila as a recombinant protein expression platform for the production of malaria vaccine antigens

    Physicians perceived usefulness of high-cost diagnostic imaging studies: results of a referral study in a German medical quality network

    Get PDF
    BACKGROUND: Medical and technological progress has led to increased numbers of diagnostic tests, some of them inducing high financial costs. In Germany, high-cost diagnostic imaging is performed by a medical specialist after referral by a general practitioner (GP) or specialist in primary care. The aim of this study was to evaluate the physicians' perceived usefulness of high-cost diagnostic imaging in patients with different clinical conditions. METHODS: Thirty-four GPs, one neurologist and one orthopaedic specialist in ambulatory care from a Medical Quality Network documented 234 referrals concerning 97 MRIs, 96 CTs-scan and 41 intracardiac catheters in a three month period. After having received the test results, they indicated if these were useful for diagnosis and treatment of the patient. RESULTS: The physicians' perceived usefulness of tests was lowest in suspected cerebral disease (40% of test results were seen as useful), cervical spine problems (64%) and unexplained abdominal complaints (67%). The perceived usefulness was highest in musculoskeletal symptoms (94%) and second best in cardiological diseases (82%). CONCLUSION: The perceived usefulness of high-cost diagnostic imaging was lower in unexplained complaints than in specific diseases. Interventions to improve the effectiveness and efficiency of test ordering should focus on clinical decision making in conditions where GPs perceived low usefulness

    Isolation and analysis of high quality nuclear DNA with reduced organellar DNA for plant genome sequencing and resequencing

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>High throughput sequencing (HTS) technologies have revolutionized the field of genomics by drastically reducing the cost of sequencing, making it feasible for individual labs to sequence or resequence plant genomes. Obtaining high quality, high molecular weight DNA from plants poses significant challenges due to the high copy number of chloroplast and mitochondrial DNA, as well as high levels of phenolic compounds and polysaccharides. Multiple methods have been used to isolate DNA from plants; the CTAB method is commonly used to isolate total cellular DNA from plants that contain nuclear DNA, as well as chloroplast and mitochondrial DNA. Alternatively, DNA can be isolated from nuclei to minimize chloroplast and mitochondrial DNA contamination.</p> <p>Results</p> <p>We describe optimized protocols for isolation of nuclear DNA from eight different plant species encompassing both monocot and eudicot species. These protocols use nuclei isolation to minimize chloroplast and mitochondrial DNA contamination. We also developed a protocol to determine the number of chloroplast and mitochondrial DNA copies relative to the nuclear DNA using quantitative real time PCR (qPCR). We compared DNA isolated from nuclei to total cellular DNA isolated with the CTAB method. As expected, DNA isolated from nuclei consistently yielded nuclear DNA with fewer chloroplast and mitochondrial DNA copies, as compared to the total cellular DNA prepared with the CTAB method. This protocol will allow for analysis of the quality and quantity of nuclear DNA before starting a plant whole genome sequencing or resequencing experiment.</p> <p>Conclusions</p> <p>Extracting high quality, high molecular weight nuclear DNA in plants has the potential to be a bottleneck in the era of whole genome sequencing and resequencing. The methods that are described here provide a framework for researchers to extract and quantify nuclear DNA in multiple types of plants.</p

    A Controlled Investigation of Optimal Internal Medicine Ward Team Structure at a Teaching Hospital

    Get PDF
    BACKGROUND: The optimal structure of an internal medicine ward team at a teaching hospital is unknown. We hypothesized that increasing the ratio of attendings to housestaff would result in an enhanced perceived educational experience for residents. METHODS: Harbor-UCLA Medical Center (HUMC) is a tertiary care, public hospital in Los Angeles County. Standard ward teams at HUMC, with a housestaff∶attending ratio of 5:1, were split by adding one attending and then dividing the teams into two experimental teams containing ratios of 3:1 and 2:1. Web-based Likert satisfaction surveys were completed by housestaff and attending physicians on the experimental and control teams at the end of their rotations, and objective healthcare outcomes (e.g., length of stay, hospital readmission, mortality) were compared. RESULTS: Nine hundred and ninety patients were admitted to the standard control teams and 184 were admitted to the experimental teams (81 to the one-intern team and 103 to the two-intern team). Patients admitted to the experimental and control teams had similar age and disease severity. Residents and attending physicians consistently indicated that the quality of the educational experience, time spent teaching, time devoted to patient care, and quality of life were superior on the experimental teams. Objective healthcare outcomes did not differ between experimental and control teams. CONCLUSIONS: Altering internal medicine ward team structure to reduce the ratio of housestaff to attending physicians improved the perceived educational experience without altering objective healthcare outcomes

    Locating Pleistocene Refugia: Comparing Phylogeographic and Ecological Niche Model Predictions

    Get PDF
    Ecological niche models (ENMs) provide a means of characterizing the spatial distribution of suitable conditions for species, and have recently been applied to the challenge of locating potential distributional areas at the Last Glacial Maximum (LGM) when unfavorable climate conditions led to range contractions and fragmentation. Here, we compare and contrast ENM-based reconstructions of LGM refugial locations with those resulting from the more traditional molecular genetic and phylogeographic predictions. We examined 20 North American terrestrial vertebrate species from different regions and with different range sizes for which refugia have been identified based on phylogeographic analyses, using ENM tools to make parallel predictions. We then assessed the correspondence between the two approaches based on spatial overlap and areal extent of the predicted refugia. In 14 of the 20 species, the predictions from ENM and predictions based on phylogeographic studies were significantly spatially correlated, suggesting that the two approaches to development of refugial maps are converging on a similar result. Our results confirm that ENM scenario exploration can provide a useful complement to molecular studies, offering a less subjective, spatially explicit hypothesis of past geographic patterns of distribution
    corecore