675 research outputs found
Model reduction by separation of variables: A comparison between hierarchical model reduction and proper generalized decomposition
Hierarchical Model reduction and Proper Generalized Decomposition both exploit separation of variables to perform a model reduction. After setting the basics, we exemplify these techniques on some standard elliptic problems to highlight pros and cons of the two procedures, both from a methodological and a numerical viewpoint
EFFECTS OF DIET CONCENTRATE LEVELS IN THE CARCASS TRAITS OF BEEF STEERS FINISHED IN CONFINAMENT
A deconvolution map-making method for experiments with circular scanning strategies
Aims. To investigate the performance of a deconvolution map-making algorithm
for an experiment with a circular scanning strategy, specifically in this case
for the analysis of Planck data, and to quantify the effects of making maps
using simplified approximations to the true beams. Methods. We present an
implementation of a map-making algorithm which allows the combined treatment of
temperature and polarisation data, and removal of instrumental effects, such as
detector time constants and finite sampling intervals, as well as the
deconvolution of arbitrarily complex beams from the maps. This method may be
applied to any experiment with a circular scanning-strategy. Results.
Low-resolution experiments were used to demonstrate the ability of this method
to remove the effects of arbitrary beams from the maps and to demonstrate the
effects on the maps of ignoring beam asymmetries. Additionally, results are
presented of an analysis of a realistic full-scale simulated data-set for the
Planck LFI 30 GHz channel. Conclusions. Our method successfully removes the
effects of the beams from the maps, and although it is computationally
expensive, the analysis of the Planck LFI data should be feasible with this
approach.Comment: 14 pages, 14 figures, accepte
Concentrate levels of crossbred bulls slaughtered at 16 or 22 months: Performance and carcass characteristics
This study was performed to assess the animal performance of 97 bulls, 1/2 Puruna~ vs. 1/2 Canchim, that were slaughtered at 16 (16M) or 22 (22M) months with three concentrate levels (0.8, 1.2, and 1.6%) of body weight (BW). The initial body weight was lower for the 16M bulls. The final body weight and hot carcass weights were similar between the two slaughter ages. The hot carcass dressing was higher for 22M bulls. The average daily gain was higher for 16M bulls. The feed intake and dry matter feed conversion were similar between 16 and 22M bulls. The carcass length, marbling, and bone percentage were lower for 16M bulls. However, the Longissimus dorsi muscle area was higher for 16M bulls. The leg length, cushion thickness, fat thickness, conformation, colour, texture, muscle percent, and fat percent were similar between 16 and 22M bulls. The final and hot carcass weights were lower for bulls that were fed with 0.8% of BW. The carcass dressing was similar for the three concentrate levels. The average daily gain was higher for bulls that were fed with 1.6% of BW of concentrate and lower for those that were fed with 0.8%. The concentrate levels had no effect on carcass characteristics, feed intake, and dry matter conversion
Effects of 3 Topical Plant Extracts on Wound Healing in Beef Cattle
Eleven heifers of the Purunã cattle breed were used to evaluate wound healing by second intention. An experimental wound excision model in bovines was created by means of a skin punch of diameter 2cm. The animals were topically treated for 17 days with a saline control or decoctions of Schinus terebinthifolius Raddi (Aroeira mansa), Tabebuia avellanedae Lorentz ex Griseb (Ipê Roxo), and Casearia sylvestris Sw.(Guaçatonga) mixed with carboxymethyl cellulose. Centripetal retraction, clinical, and histological aspects of the wounds were observed until complete healing. Decoctions of T. avellanedae and S. terebinthifolius, but not C. sylvestris, had a beneficial effect on wound healing by second intention
Evaluation of Mater Bi and Polylactic Acid as materials for biodegradable innovative mini-radiosondes to track small scale fluctuations within clouds
Turbulence plays an important part in determining the chemical and physical processes, on both the micro- and macro-scales, whereby clouds are formed and behave. However, exactly how these are linked together and how turbulence impacts each of these processes is not yet fully understood. This is partly due to a lack of in-situ small scale fluctuation measurements due to a limitation in the available technology. It is in this context that the radiosondes, for which the material characterisation is presented in this paper, are being developed to generate a Lagrangian set of data which can be used to improve the ever-expanding knowledge of atmospheric processes and, in particular, the understanding of the interaction between turbulence and micro-physical phenomenologies inside clouds (www.complete-h2020network.eu). Specifically, the materials developed for the balloons are discussed in further detail within this paper. Mater Bi and polylactic acid are the two common biodegradable thermoplastics that were used initially to make the balloons. To tailor their properties, the balloons were then coated with carnauba wax blended with either pine resin or SiO2 nanoparticles. The properties such as hydrophobicity, toughness, elasticity and helium gas permeability are investigated and improved in order to keep the density of the radiosondes as constant as possible for a couple of hours. This will allow them to float inside and outside clouds on an isopycnic surface, to measure various properties such as velocity, temperature, pressure and humidity by means of solid state sensors and to transmit them to receivers on Earth. Tests have been made under a rigorous metrological approach comparing the 6 new materials with two reference balloon materials, latex and mylar. It was found that Mater Bi with the two carnauba wax coatings is the most suited though its roughness and water vapour permeability should be improved
Effects of CMB temperature uncertainties on cosmological parameter estimation
We estimate the effect of the experimental uncertainty in the measurement of
the temperature of the cosmic microwave background (CMB) on the extraction of
cosmological parameters from future CMB surveys. We find that even for an ideal
experiment limited only by cosmic variance up to l = 2500 for both the
temperature and polarisation measurements, the projected cosmological parameter
errors are remarkably robust against the uncertainty of 1 mK in the FIRAS
instrument's CMB temperature monopole measurement. The maximum degradation in
sensitivity is 20%, for the baryon density estimate, relative to the case in
which the monopole is known infinitely well. While this degradation is
acceptable, we note that reducing the uncertainty in the current temperature
measurement by a factor of five will bring it down to the per cent level. We
also estimate the effect of the uncertainty in the dipole temperature
measurement. Assuming the overall calibration of the data to be dominated by
the dipole error of 0.2% from FIRAS, the sensitivity degradation is
insignificant and does not exceed 10% in any parameter direction.Comment: 12 pages, 2 figures, uses iopart.cls, v2: added discussion of CMB
dipole uncertainty, version accepted by JCA
Widespread association between the ericoid mycorrhizal fungus Rhizoscyphus ericae and a leafy liverwort in the maritime and sub-Antarctic
A recent study identified a fungal isolate from the Antarctic leafy liverwort Cephaloziella varians as the ericoid mycorrhizal associate Rhizoscyphus ericae. However, nothing is known about the wider Antarctic distribution of R. ericae in C. varians, and inoculation experiments confirming the ability of the fungus to form coils in the liverwort are lacking.
Using direct isolation and baiting with Vaccinium macrocarpon seedlings, fungi were isolated from C. varians sampled from eight sites across a 1875-km transect through sub- and maritime Antarctica. The ability of an isolate to form coils in aseptically grown C. varians was also tested.
Fungi with 98–99% sequence identity to R. ericae internal transcribed spacer (ITS) region and partial large subunit ribosomal (r)DNA sequences were frequently isolated from C. varians at all sites sampled. The EF4/Fung5 primer set did not amplify small subunit rDNA from three of five R. ericae isolates, probably accounting for the reported absence of the fungus from C. varians in a previous study. Rhizoscyphus ericae was found to colonize aseptically-grown C. varians intracellularly, forming hyphal coils.
This study shows that the association between R. ericae and C. varians is apparently widespread in Antarctica, and confirms that R. ericae is at least in part responsible for the formation of the coils observed in rhizoids of field-collected C. varians
- …