ZONING AND ECONOMIC DEVELOPMENT

Land Economics/Use,

Effects of external environments on the short beam shear strength of filament wound graphite/epoxy

Filament wound graphite/epoxy samples were immersed in seawater, deionized water, and toluene at room temperature and 80 deg C for 5, 15, and 43 days, and in methanol at room temperature for 15 and 43 days. The percent weight gains and short beam shear strengths were determined after environmental exposure. Samples immersed in deionized water and seawater had higher percent weight gains than those immersed in toluene at room temperature and 80 deg C. The percent weight gains for samples immersed in methanol at room temperature were comparable to those of deionized water and seawater immersed samples. A comparison of percent decreases in short beam shear strengths could not be made due to a large scatter in data. This may indicate defects in samples due to machining or variations in material properties due to processing

Cyclic and Long-term Variation of Sunspot Magnetic Fields

Measurements from the Mount Wilson Observatory (MWO) are used to study the long-term variations of sunspot field strengths from 1920 to 1958. Following a modified approach similar to that in Pevtsov et al. (2011), for each observing week we select a single sunspot with the strongest field strength measured that week and then compute monthly averages of these weekly maximum field strengths. The data show the solar cycle variation of the peak field strengths with an amplitude of about 500-700 gauss (G), but no statistically significant long-term trends. Next, we use the sunspot observations from the Royal Greenwich Observatory (RGO) to establish a relationship between the sunspot areas and the sunspot field strengths for Cycles 15-19. This relationship is then used to create a proxy of peak magnetic field strength based on sunspot areas from the RGO and the USAF/NOAA network for the period from 1874 to early 2012. Over this interval, the magnetic field proxy shows a clear solar cycle variation with an amplitude of 500-700 G and a weaker long-term trend. From 1874 to around 1920, the mean value of magnetic field proxy increases by about 300-350 G, and, following a broad maximum in 1920-1960, it decreases by about 300 G. Using the proxy for the magnetic field strength as the reference, we scale the MWO field measurements to the measurements of the magnetic fields in Pevtsov et al. (2011) to construct a combined data set of maximum sunspot field strengths extending from 1920 to early 2012. This combined data set shows strong solar cycle variations and no significant long-term trend (linear fit to the data yields a slope of $-0.2\pm$0.8 G year$^{-1}$). On the other hand, the peak sunspot field strengths observed at the minimum of the solar cycle show a gradual decline over the last three minima (corresponding to cycles 21-23) with a mean downward trend of $\approx$ 15 G year$^{-1}$

Process for producing tris s(n-methylamino) methylsilane

A method of producing tris (N-methylamine) methylsilane is described including the steps of forming and cooling a liquid solution of methylamine in an inert solvent and under an inert atmosphere at a temperature of about -30 C and slowly adding a quantity of methyltricholorosilane while maintaining said temperature. The reaction mixture is then heated for about 60 minutes at a temperature of about 40 C, followed by filtering the solid portion from the liquid portion. The liquid is distilled to remove the solvent, resulting in a high yield of tris (N-methylamine) methylsilane

High-throughput sequencing of 16S rRNA gene amplicons : effects of extraction procedure, primer length and annealing temperature

The analysis of 16S-rDNA sequences to assess the bacterial community composition of a sample is a widely used technique that has increased with the advent of high throughput sequencing. Although considerable effort has been devoted to identifying the most informative region of the 16S gene and the optimal informatics procedures to process the data, little attention has been paid to the PCR step, in particular annealing temperature and primer length. To address this, amplicons derived from 16S-rDNA were generated from chicken caecal content DNA using different annealing temperatures, primers and different DNA extraction procedures. The amplicons were pyrosequenced to determine the optimal protocols for capture of maximum bacterial diversity from a chicken caecal sample. Even at very low annealing temperatures there was little effect on the community structure, although the abundance of some OTUs such as Bifidobacterium increased. Using shorter primers did not reveal any novel OTUs but did change the community profile obtained. Mechanical disruption of the sample by bead beating had a significant effect on the results obtained, as did repeated freezing and thawing. In conclusion, existing primers and standard annealing temperatures captured as much diversity as lower annealing temperatures and shorter primers

The use of steady-state level combinations and signal event edge correlations in the disaggregation of total power measurements

A dissertation submitted to the Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, in ful lment of the requirements for the degree of Master of Science in Engineering. Johannesburg, 2015The work presented extends and contributes to research in Non-Intrusive Load Monitoring (NILM), focussing on steady-state and transient power measurement disaggregation techniques for circuits containing household ap- pliances. Although previous work in this area has produced and evaluated a wide range of NILM approaches, much of it has involved the use of datasets captured from real-world household implementations. In such cases, the lack of accurate ground truth data makes it di cult to assess disaggregation tech- niques. In the research presented, three NILM techniques are comparatively evaluated using measurements from typical household appliances assembled within a laboratory environment, where accurate ground truth data could be compiled to complement the measurements. This allows for the accu- racy of the various disaggregation approaches to be precisely evaluated. It is demonstrated that the correlation of transient event edges in aggregated power measurements to individual appliance transient exemplars performs better than the matching of steady-state power levels against individual ap- pliance state combinations. Furthermore, the transient approach is shown to be the most appropriate technique for further development.MT201