Nesting Success of Kemp’s Ridley Sea Turtles, Lepidochelys kempi, at Rancho Nuevo, Tamaulipas, Mexico, 1982–2004

The Kemp’s ridley sea turtle, Lepidochelys kempi, was on the edge of extinction owing to a combination of intense egg harvesting and incidental capture in commercial fishing trawls. Results from a cooperative conservation strategy initiated in 1978 between Mexico and the United States to protect and restore the Kemp’s ridley turtle at the main nesting beach at Rancho Nuevo, Tamaulipas, Mexico are assessed. This strategy appears to be working as there are signs that the species is starting to make a recovery. Recovery indicators include: 1) increased numbers of nesting turtles, 2) increased numbers of 100+ turtle nesting aggregations (arribadas), 3) an expanding nesting season now extending from March to August, and 4) significant nighttime nesting since 2003. The population low point at Rancho Nuevo was in 1985 (706 nests) and the population began to significantly increase in 1997 (1,514 nests), growing to over 4,000 nests in 2004. The size and numbers of arribadas have increased each year since 1983 but have yet to exceed the 1,000+ mark; most arribadas are still 200–800+ turtles

An object that defies stereotypes : X-ray observations of SBS 1150+599A - the binary nucleus of PN G135.9+55.9

We present X-ray observations of the close binary nucleus of the planetary nebula (PN) PN G135.9+55.9 obtained with the XMM satellite. The nebula is the most oxygen-poor PN known to date and is located in the Galactic halo. It is known to harbor a close binary nucleus of which only one component can be observed in optical-UV range. New X-ray observations show that the invisible component is a very hot compact star. This finding allows us to reconstruct the immediate past of the object and predict its future. The parameters of the binary components we determine strongly suggest that the precursor was a symbiotic supersoft X-ray source that finished its life by Roche lobe overflow. PN G135.9+55.9 is an excellent candidate for a future type Ia supernova

Estilos de vida en relación a la alimentación y hábitos alimentarios dentro y

Lobos, G (Lobos, German). Univ Talca, Fac Ciencias Empresariales, Escuela Ingn Comercial, Talca, ChileResumen Objetivo: Distinguir tipologías de consumidores en base a su estilo de vida en relación a la alimentación en las principales comunas de la Región Metropolitana de Santiago, Chile, y caracterizarlas según sus hábitos de consumo de alimentos dentro y fuera del hogar, características sociodemográficas y su nivel de satisfacción con su alimentación. Material y método: Se aplicó un cuestionario estructurado a una muestra de 951 personas en las principales comunas de la Región Metropolitana de Santiago (más de 100.000 habitantes). El instrumento de recogida de información incluyó una adaptación del cuestionario de estilos de vida en relación a la alimentación (FRL) y la escala SWFL (Satisfaction with Food-related Life). Se consultaron los hábitos de consumo de alimentos dentro y fuera del hogar y variables de clasificación sociodemográfica de los encuestados. Resultados: Mediante análisis cluster se distinguieron cinco tipologías con diferencias significativas en los cinco componentes obtenidos del FRL, con análisis factorial de componentes principales. Las tipologías presentaron distinto perfil de género, edad y nivel socioeconómico y difirieron en los puntajes obtenidos en la SWFL. Se diferenciaron en la frecuencia en que la persona almuerza, toma once y cena en su hogar. Respecto a las comidas fuera del hogar, las tipologías se distinguieron según la frecuencia de comidas en restaurantes, locales de comida rápida y en la compra de comida preparada. Conclusiones: Un estilo de vida en relación a la alimentación con baja implicación y disfrute de los alimentos se asocia con un mayor nivel socioeconómico y menor edad de las personas. Adicionalmente, se asocia con comportamientos alimentarios poco saludables y no beneficiosos para las personas, como una mayor frecuencia de comidas en restaurantes y de compra de comida preparada, junto a una menor frecuencia de comidas en el hogar, lo que estaría influyendo en un nivel inferior de satisfacción con la alimentación

Jets, knots and tails in planetary nebulae: NGC 3918, K 1-2 and Wray 17-1

We analyze optical images and high-resolution, long-slit spectra of three planetary nebulae which possess collimated, low-ionization features. NGC 3918 is composed of an inner, spindle-shaped shell mildly inclined with respect to the plane of the sky. Departing from the polar regions of this shell, we find a two-sided jet expanding with velocities which increase linearly with distance from 50 to 100 km/s. The jet is probably coeval with the inner shell (with the age of approximately 1000 D yr, where D is the distance in kpc), suggesting that its formation should be ascribed to the same dynamical processes which also shaped the main nebula, and not to a more recent mass loss episode. We discuss the formation of the aspherical shell and jet in the light of current hydrodynamical and magnetohydrodynamical theories. K 1-2 is a planetary nebula with a close binary nucleus which shows a collimated string of knots embedded in a diffuse, elliptical shell. The knots expand with a velocity similar to that of the elliptical nebula (25 km/s), except for an extended tail located out of the main nebula, which linearly accelerates up to 45 km/s. We estimate an inclination on the line of the sight of 40 degres for the string of knots; once the orientation of the orbit is also determined, this information will allow us to test the prediction of current theories of the occurrence of polar jets from close binary systems. Wray 17-1 has a complex morphology, showing two pairs of low-ionization structures located in almost perpendicular directions from the central star, and embedded in a large, diffuse nebula. The two pairs show notable similarities and differences, and their origin is very puzzling.Comment: 20 pages plus 10 figures. ApJ recently published (ApJ 523, 721 (1999)

Microwave foaming of sodium silicate-ortodibasic calcium phosphate mixtures

[ES] La acción de la energía de las microondas, genera porosidad interna en un material cerámico húmedo. En el presente trabajo, se analiza el efecto del tiempo de aplicación de las microondas sobre el comportamiento térmico, cambio de volumen, tamaño y distribución de poros, reacciones químicas y disolución de probetas cerámicas de silicato de sodio / ortofosfato cálcico dibásico (FCD). Para caracterizar las espumas cerámicas, se utilizó, análisis de imágenes, microscopía electrónica de barrido, difracción de rayos X y picnometría de helio. Se obtuvieron espumas cerámicas con una porosidad de 71 a 79 % y un rango de tamaño de poro de 10 a 200 μm. Después de 90 segundos, las probetas alcanzaron una temperatura de aproximadamente 130°C y una pérdida de peso de 23% con respecto al peso total de la muestra. Se observaron cambios de volumen y de los compuestos químicos en las muestras espumadas cuando se varió la proporción del FCD en la mezcla. Para contenidos de 10, 20 y 30% en peso de FCD, el incremento de volumen se redujo a 350, 300 y 250% respectivamente. En muestras con 30% de FCD calentadas por microondas durante 90 segundos la cantidad de un nuevo compuesto en la espuma, constituido por β-NaCaPO4, fue del orden de 42.9%. En esa misma muestra, el 57.1 % restante fue FCD. Considerando pruebas de disolución de un gramo de muestra en 100 ml de agua destilada, la disolución obtenida en muestras espumadas por microondas después de 20 días fue de 900 ppm/gr para el Na y de 2.7 ppm/gr para el Ca en muestras con 10% de FCD. En muestras con 30% de FCD la disolución de Na fue de 470 ppm/gr y del Ca de 5 ppm/gr.[EN] The effect of microwave application on the thermal behaviour, volume change, size and pore size distribution as well as chemical reactions and dissolution of sodium silicate/dibasic calcium phosphate ceramic (DCF) samples have been analysed. Ceramics foams with porosities between 71 and 79 wt% and pore sizes ranging from 10 to 200 microns have been obtained. After 90 seconds the temperature of samples reach about 130 °C with a weight loss of 23 wt%. Differences in the proportion of DCF in the initial mixture originate changes in volume and different chemical compounds in the final obtained foams. Additions of 10, 20 and 30 wt% of DCF originates volume increases of 350, 300 and 250 % respectively. In foam samples with 30 wt% of DCF, heated by microwave during 90 sec., the amount of the new compound β-NaCaPO4 was about 42.9 wt%. The other component of this sample, 57.1 wt%, was DCF. Dissolution tests were made, using one gram of sample, in 100 ml of distilled water. The dissolution of 10 wt% DCF foamed samples, after 20 days into water, were 900 ppm/gr of Na and 2.7 ppm/gr of Ca. In samples with 30 wt% of DCF the dissolution were 470 ppm/gr and 5 ppm/gr for Na and Ca respectively.Peer reviewe

Development and operation of a pixel segmented liquid-filled linear array for radiotherapy quality assurance

A liquid isooctane (C$_{8}$H$_{18}$) filled ionization linear array for radiotherapy quality assurance has been designed, built and tested. The detector consists of 128 pixels, each of them with an area of 1.7 mm $\times$ 1.7 mm and a gap of 0.5 mm. The small pixel size makes the detector ideal for high gradient beam profiles like those present in Intensity Modulated Radiation Therapy (IMRT) and radiosurgery. As read-out electronics we use the X-Ray Data Acquisition System (XDAS) with the Xchip developed by the CCLRC. Studies concerning the collection efficiency dependence on the polarization voltage and on the dose rate have been made in order to optimize the device operation. In the first tests we have studied dose rate and energy dependences, and signal reproducibility. Dose rate dependence was found lower than 2.5 % up to 5 Gy min$^{-1}$, and energy dependence lower than 2.1 % up to 20 cm depth in solid water. Output factors and penumbras for several rectangular fields have been measured with the linear array and were compared with the results obtained with a 0.125 cm$^{3}$ air ionization chamber and radiographic film, respectively. Finally, we have acquired profiles for an IMRT field and for a virtual wedge. These profiles have also been compared with radiographic film measurements. All the comparisons show a good correspondence. Signal reproducibility was within a 2% during the test period (around three months). The device has proved its capability to verify on-line therapy beams with good spatial resolution and signal to noise ratio.Comment: 16 pages, 12 figures Submitted to Phys. Med. Bio

Environmental assessment of a new building envelope material derived from urban agriculture wastes: the case of the tomato plants stems

Purpose: Decarbonizing cities is one of today biggest challenges. In this regard, particular attention has been paid on improving the environmental performance of buildings. In this framework, this work consists in assessing the environmental impact of an innovative building envelope component derived from urban agriculture (UA) wastes. In fact, rooftop UA seems to be a possible solution to the rising food demand due to increasing urban demographic growth. Consequently, rooftop UA wastes need to be treated in sustainable ways. Methods: This study aims to determine the carbon footprint and embodied energy of a new infill wall material, derived from UA wastes produced by a building rooftop greenhouse tomato crop, and evaluate the potential biogenic carbon that such by-product could fix temporally until its end of life. After an initial description of the manufacturing process of the new material, its carbon footprint and embodied energy have been calculated by means of the life cycle assessment (LCA) methodology according to the ISO 14044 and the ISO 14067 guidelines adapted to the analyzed context. In particular, the inventory analysis is based on data collected from the production of samples of the new material at the laboratory scale. Results and discussion: The results of the LCA indicate that, when the biogenic carbon fixed in the UA wastes is considered, a negative carbon footprint of -0.2 kg CO2 eq. per kg of material can be obtained. Hence, it can be assumed that from a life cycle perspective the material is able to fix carbon emissions instead of emitting them. Specifically, for the considered scenario, approximately 0.42 kg CO2 eq./m2 per year could be sequestered. However, the crop area required to produce enough waste to manufacture a unit of material is quite high. Therefore, future studies should focus on individuate solutions to reduce the density of the new component, and also different urban crops with higher waste production rates. Conclusions: The outcomes of the study put in evidence the potential of the new proposed infill wall component in fixing carbon emissions from UA, allowing to also compensate those relating to the production and transportation stages of the component life cycle. Moreover, producing by-products with UA wastes, hence temporally storing the carbon fixed by crops, may contribute to reduce the carbon cycles speed conversely to traditional waste management solutions, other than lower new raw materials depletion