212 research outputs found
Expression of a Fungal Lectin in Arabidopsis Enhances Plant Growth and Resistance Toward Microbial Pathogens and a Plant-Parasitic Nematode
Coprinopsis cinerea lectin 2 (CCL2) is a fucoside-binding lectin from the basidiomycete
C. cinerea that is toxic to the bacterivorous nematode Caenorhabditis elegans as well
as animal-parasitic and fungivorous nematodes. We expressed CCL2 in Arabidopsis
to assess its protective potential toward plant-parasitic nematodes. Our results
demonstrate that expression of CCL2 enhances host resistance against the cyst
nematode Heterodera schachtii. Surprisingly, CCL2-expressing plants were also more
resistant to fungal pathogens including Botrytis cinerea, and the phytopathogenic
bacterium Pseudomonas syringae. In addition, CCL2 expression positively affected
plant growth indicating that CCL2 has the potential to improve two important
agricultural parameters namely biomass production and general disease resistance. The
mechanism of the CCL2-mediated enhancement of plant disease resistance depended
on fucoside-binding by CCL2 as transgenic plants expressing a mutant version of
CCL2 (Y92A), compromised in fucoside-binding, exhibited wild type (WT) disease
susceptibility. The protective effect of CCL2 did not seem to be direct as the lectin
showed no growth-inhibition toward B. cinerea in in vitro assays. We detected, however,
a significantly enhanced transcriptional induction of plant defense genes in CCL2- but
not CCL2-Y92A-expressing lines in response to infection with B. cinerea compared
to WT plants. This study demonstrates a potential of fungal defense lectins in plant
protection beyond their use as toxins
Marasmius oreades agglutinin enhances resistance of Arabidopsis against plant-parasitic nematodes and a herbivorous insect
Background Plant-parasitic nematodes and herbivorous insects have a significant negative impact on global crop production. A successful approach to protect crops from these pests is the in planta expression of nematotoxic or entomotoxic proteins such as crystal proteins from Bacillus thuringiensis (Bt) or plant lectins. However, the efficacy of this approach is threatened by emergence of resistance in nematode and insect populations to these proteins. To solve this problem, novel nematotoxic and entomotoxic proteins are needed. During the last two decades, several cytoplasmic lectins from mushrooms with nematicidal and insecticidal activity have been characterized. In this study, we tested the potential of Marasmius oreades agglutinin (MOA) to furnish Arabidopsis plants with resistance towards three economically important crop pests: the two plant-parasitic nematodes Heterodera schachtii and Meloidogyne incognita and the herbivorous diamondback moth Plutella xylostella. Results The expression of MOA does not affect plant growth under axenic conditions which is an essential parameter in the engineering of genetically modified crops. The transgenic Arabidopsis lines showed nearly complete resistance to H. schachtii, in that the number of female and male nematodes per cm root was reduced by 86-91 % and 43-93 % compared to WT, respectively. M. incognita proved to be less susceptible to the MOA protein in that 18-25 % and 26-35 % less galls and nematode egg masses, respectively, were observed in the transgenic lines. Larvae of the herbivorous P. xylostella foraging on MOA-expression lines showed a lower relative mass gain (22-38 %) and survival rate (15-24 %) than those feeding on WT plants. Conclusions The results of our in planta experiments reveal a robust nematicidal and insecticidal activity of the fungal lectin MOA against important agricultural pests which may be exploited for crop protection
Recommended from our members
Carbon dioxide sequestration by direct mineral carbonation with carbonic acid
The Albany Research Center (ARC) of the U.S. Dept. of Energy (DOE) has been conducting a series of mineral carbonation tests at its Albany, Oregon, facility over the past 2 years as part of a Mineral Carbonation Study Program within the DOE. Other participants in this Program include the Los Alamos National Laboratory, Arizona State University, Science Applications International Corporation, and the DOE National Energy Technology Laboratory. The ARC tests have focused on ex-situ mineral carbonation in an aqueous system. The process developed at ARC utilizes a slurry of water mixed with a magnesium silicate mineral, olivine [forsterite end member (Mg2SiO4)], or serpentine [Mg3Si2O5(OH)4]. This slurry is reacted with supercritical carbon dioxide (CO2) to produce magnesite (MgCO3). The CO2 is dissolved in water to form carbonic acid (H2CO3), which dissociates to H+ and HCO3 -. The H+ reacts with the mineral, liberating Mg2+ cations which react with the bicarbonate to form the solid carbonate. The process is designed to simulate the natural serpentinization reaction of ultramafic minerals, and for this reason, these results may also be applicable to in-situ geological sequestration regimes. Results of the baseline tests, conducted on ground products of the natural minerals, have been encouraging. Tests conducted at ambient temperature (22 C) and subcritical CO2 pressures (below 73 atm) resulted in very slow conversion to the carbonate. However, when elevated temperatures and pressures are utilized, coupled with continuous stirring of the slurry and gas dispersion within the water column, significant reaction occurs within much shorter reaction times. Extent of reaction, as measured by the stoichiometric conversion of the silicate mineral (olivine) to the carbonate, is roughly 90% within 24 hours, using distilled water, and a reaction temperature of 185?C and a partial pressure of CO2 (PCO2) of 115 atm. Recent tests using a bicarbonate solution, under identical reaction conditions, have achieved roughly 83% conversion of heat treated serpentine and 84% conversion of olivine to the carbonate in 6 hours. The results from the current studies suggest that reaction kinetics can be improved by pretreatment of the mineral, catalysis of the reaction, or some combination of the two. Future tests are intended to examine a broader pressure/temperature regime, various pretreatment options, as well as other mineral groups
Recommended from our members
Carbon dioxide sequestration by direct aqueous mineral carbonation
Carbon dioxide sequestration by an ex-situ, direct aqueous mineral carbonation process has been investigated over the past two years. This process was conceived to minimize the steps in the conversion of gaseous CO2 to a stable solid. This meant combining two separate reactions, mineral dissolution and carbonate precipitation, into a single unit operation. It was recognized that the conditions favorable for one of these reactions could be detrimental to the other. However, the benefits for a combined aqueous process, in process efficiency and ultimately economics, justified the investigation. The process utilizes a slurry of water, dissolved CO2, and a magnesium silicate mineral, such as olivine [forsterite end member (Mg2SiO4)], or serpentine [Mg3Si2O5(OH)4]. These minerals were selected as the reactants of choice for two reasons: (1) significant abundance in nature; and (2) high molar ratio of the alkaline earth oxides (CaO, MgO) within the minerals. Because it is the alkaline earth oxide that combines with CO2 to form the solid carbonate, those minerals with the highest ratio of these oxides are most favored. Optimum results have been achieved using heat pretreated serpentine feed material, sodium bicarbonate and sodium chloride additions to the solution, and high partial pressure of CO2 (PCO2). Specific conditions include: 155?C; PCO2=185 atm; 15% solids. Under these conditions, 78% conversion of the silicate to the carbonate was achieved in 30 minutes. Future studies are intended to investigate various mineral pretreatment options, the carbonation solution characteristics, alternative reactants, scale-up to a continuous process, geochemical modeling, and process economics
Recommended from our members
A method for permanent CO2 mineral carbonation
The Albany Research Center (ARC) of the U.S. Department of Energy (DOE) has been conducting research to investigate the feasibility of mineral carbonation as a method for carbon dioxide (CO2) sequestration. The research is part of a Mineral Carbonation Study Program within the Office of Fossil Energy in DOE. Other participants in this Program include DOE?s Los Alamos National Laboratory and National Energy Technology Laboratory, Arizona State University, and Science Applications International Corporation. The research has focused on ex-situ mineral carbonation in an aqueous system. The process developed at ARC reacts a slurry of magnesium silicate mineral with supercritical CO2 to produce a solid magnesium carbonate product. To date, olivine and serpentine have been used as the mineral reactant, but other magnesium silicates could be used as well. The process is designed to simulate the natural serpentinization reaction of ultramafic minerals, and consequently, these results may also be applicable to strategies for in-situ geological sequestration. Baseline tests were begun in distilled water on ground products of foundry-grade olivine. Tests conducted at 150 C and subcritical CO2 pressures (50 atm) resulted in very slow conversion to carbonate. Increasing the partial pressure of CO2 to supercritical (>73 atm) conditions, coupled with agitation of the slurry and gas dispersion within the water column, resulted in significant improvement in the extent of reaction in much shorter reaction times. A change from distilled water to a bicarbonate/salt solution further improved the rate and extent of reaction. When serpentine, a hydrated mineral, was used instead of olivine, extent of reaction was poor until heat treatment was included prior to the carbonation reaction. Removal of the chemically bound water resulted in conversion to carbonate similar to those obtained with olivine. Recent results have shown that conversions of nearly 80 pct are achievable after 30 minutes at test conditions of 155 C and 185 atm CO2 in a bicarbonate/salt solution. The results from the current studies suggest that reaction kinetics can be further improved. Future tests will examine additional pressure/temperature regimes, various pretreatment options,and solution modifications
Recommended from our members
CO2 storage in solid form: a study of direct mineral carbonation
Direct mineral carbonation by an ex-situ process in an aqueous system has been investigated over the past two years. The process utilizes a slurry of water mixed with a magnesium silicate mineral, such as olivine [forsterite end member (Mg2SiO4)], or serpentine [Mg3Si2O5(OH)4]. This slurry is reacted with sub- or supercritical carbon dioxide (CO2) to produce magnesite (MgCO3). The CO2 is dissolved in water to form carbonic acid (H2CO3), which dissociates to H+ and HCO3-. The H+ ion hydrolyzes the mineral, liberating Mg2+ cations which react with the bicarbonate to form the solid carbonate. Results of the baseline tests, conducted on ground products of the natural minerals, have demonstrated that the kinetics of the reaction are slow at ambient temperature (22 C) and subcritical CO2 pressures (below 73 atm). However, at elevated temperature and pressure, coupled with continuous stirring of the slurry and gas dispersion within the water column, significant conversion to the carbonate occurs. Extent of reaction is roughly 90% within 24 hours, at 185 C and partial pressure of CO2 (PCO2) of 115 atm. Heat pretreatment of the serpentine, coupled with bicarbonate and salt additions to the solution, improve reaction kinetics, resulting in an extent of reaction of roughly 80% within 0.5 hours, at 155 C and PCO2 of 185 atm. Subsequent tests are intended to examine various pretreatment options, the carbonation solution characteristics, as well as other mineral groups
Recommended from our members
Carbon Dioxide Sequestration by Direct Mineral Carbonation: Results from Recent Studies and Current Status
Direct mineral carbonation has been investigated as a process to convert gaseous CO2 into a geologically stable, solid final form. The process utilizes a solution of sodium bicarbonate (NaHCO3), sodium chloride (NaCl), and water, mixed with a mineral reactant, such as olivine (Mg2SiO4) or serpentine [Mg3Si2O5(OH)4]. Carbon dioxide is dissolved into this slurry, by diffusion through the surface and gas dispersion within the aqueous phase. The process includes dissolution of the mineral and precipitation of magnesium carbonate (MgCO3) in a single unit operation. Optimum results have been achieved using heat pretreated serpentine feed material, with a surface area of roughly 19 m2 per gram, and high partial pressure of CO2 (PCO2). Specific conditions include: 155?C; PCO2=185 atm; 15% solids. Under these conditions, 78% stoichiometric conversion of the silicate to the carbonate was achieved in 30 minutes. Studies suggest that the mineral dissolution rate is primarily surface controlled, while the carbonate precipitation rate is primarily dependent on the bicarbonate concentration of the slurry. Current studies include further examination of the reaction pathways, and an evaluation of the resource potential for the magnesium silicate reactant, particularly olivine. Additional studies include the examination of various pretreatment options, the development of a continuous flow reactor, and an evaluation of the economic feasibility of the process
Recommended from our members
Research status on the sequestration of carbon dioxide by direct aqueous mineral carbonation
Direct aqueous mineral carbonation has been investigated as a process to convert gaseous CO2 into a geologically stable, solid final form. The process utilizes a solution of distilled water, or sodium bicarbonate (NaHCO3), sodium chloride (NaCl), and water, mixed with a mineral reactant, such as olivine (Mg2SiO4) or serpentine [Mg3Si2O5(OH)4]. Carbon dioxide is dissolved into this slurry, by diffusion through the surface and gas dispersion within the aqueous phase. The process includes dissolution of the mineral and precipitation of magnesium carbonate (MgCO3) in a single unit operation. Mineral reactivity has been increased by pretreatment of the minerals. Thermal activation of serpentine can be achieved by heat pretreatment at 630 C. Carbonation of the thermally activated serpentine, using the bicarbonate-bearing solution, at T=155 C, PCO2=185 atm, and 15% solids, achieved 78% stoichiometric conversion of the silicate to the carbonate in 30 minutes. Recent studies have investigated mechanical activation as an alternative to thermal treatment. The addition of a high intensity attrition grinding step to the size reduction circuit successfully activated both serpentine and olivine. Over 80% stoichiometric conversion of the mechanically activated olivine was achieved in 60 minutes, using the bicarbonate solution at T=185 C, PCO2=150 atm, and 15% solids. Significant carbonation of the mechanically activated minerals, at up to 66% stoichiometric conversion, has also been achieved at ambient temperature (25 C) and PCO2 ={approx}10 atm
Separating species and environmental determinants of leaf functional traits in temperate rainforest plants along a soil-development chronosequence
We measured a diverse range of foliar characteristics in shrub and tree species in temperate rainforest communities along a soil chronosequence (six sites from 8 to 120 000 years) and used multilevel model analysis to attribute the proportion of variance for each trait into genetic (G, here meaning species-level), environmental (E) and residual error components. We hypothesised that differences in leaf traits would be driven primarily by changes in soil nutrient availability during ecosystem progression and retrogression. Several leaf structural, chemical and gas-exchange traits were more strongly driven by G than E effects. For leaf mass per unit area (MA), foliar [N], net CO2 assimilation and dark respiration rates and foliar carbohydrate concentration, the G component accounted for 60–87% of the total variance, with the variability associated with plot, the E effect, much less important. Other traits, such as foliar [P] and N : P, displayed strong E and residual effects. Analyses revealed significant reductions in the slopes of G-only bivariate relationships when compared with raw relationships, indicating that a large proportion of trait–trait relationships is species based, and not a response to environment per se. This should be accounted for when assessing the mechanistic basis for using such relationships in order to make predictions of responses of plants to short-term environmental change
- …