A study of fasting lipid profile in chronic kidney disease patients

Background: Dyslipidemia is very much common in chronic kidney disease patients and is responsible for cardiovascular disease (CKD) which is most common cause of mortality in them. So, it is necessary to study the lipid profile in CKD patients to prevent morbidity and mortality.Methods: Subjects each of 50 in number are grouped into healthy controls (group-1), CKD patients without hemodialysis (group-2), CKD patients with hemodialysis (group-3). After fasting of 12 hours, lipid profile is assessed in all cases.Results: In this study, there is increase in Total cholesterol (TC), Low Density lipoprotein (LDL), very Low-Density lipoprotein (VLDL) and Triglycerides (TG) and decrease in High Density Lipoprotein (HDL) in all CKD patients compared to healthy controls (p-value for each parameter <0.001). There is increase in TC, TG and VLDL in diabetic CKD patients compare to non-diabetic CKD patients and p-value for each parameter is <0.05. It was found that TG and VLDL increase and HDL decrease in group-3 compare to group-2 is statistically significant (p-value for each <0.05) and no significant variation in TC and LDL in these groups.Conclusions: Present study demonstrated that there is dyslipidemia in CKD patients irrespective of mode of management, but the derangement is much more common and significant in CKD with hemodialysis group and they are at risk of cardiovascular disease. It is better to start lipid lowering drugs which decreases disease progression and dyslipidemia

Identification of lead vacancy defects in lead halide perovskites

Perovskite photovoltaics advance rapidly, but questions remain regarding point defects: while experiments have detected the presence of electrically active defects no experimentally confirmed microscopic identifications have been reported. Here we identify lead monovacancy (VPb) defects in MAPbI3 (MA = CH3NH3+) using positron annihilation lifetime spectroscopy with the aid of density functional theory. Experiments on thin film and single crystal samples all exhibited dominant positron trapping to lead vacancy defects, and a minimum defect density of ~3 7 1015 cm−3 was determined. There was also evidence of trapping at the vacancy complex (VPbVI)− in a minority of samples, but no trapping to MA-ion vacancies was observed. Our experimental results support the predictions of other first-principles studies that deep level, hole trapping, VPb2−, point defects are one of the most stable defects in MAPbI3. This direct detection and identification of a deep level native defect in a halide perovskite, at technologically relevant concentrations, will enable further investigation of defect driven mechanisms

Efficient room temperature aqueous Sb2S3 synthesis for inorganic-organic sensitized solar cells with 5.1% efficiencies.

Sb2S3 sensitized solar cells are a promising alternative to devices employing organic dyes. The manufacture of Sb2S3 absorber layers is however slow and cumbersome. Here, we report the modified aqueous chemical bath synthesis of Sb2S3 absorber layers for sensitized solar cells. Our method is based on the hydrolysis of SbCl3 to complex antimony ions decelerating the reaction at ambient conditions, in contrast to the usual low temperature deposition protocol. This simplified deposition route allows the manufacture of sensitized mesoporous-TiO2 solar cells with power conversion efficiencies up to η = 5.1%. Photothermal deflection spectroscopy shows that the sub-bandgap trap-state density is lower in Sb2S3 films deposited with this method, compared to standard deposition protocols.Cambridge Trust, the Mott Fund for Physics of the Environment and Corpus Christi College Cambridge for funding. A.S. acknowledges funding from the Engineering and Physical Sciences Research Council (EPSRC).This is the final version. It first appeared at http://pubs.rsc.org/en/Content/ArticleLanding/2015/CC/c5cc01966d#!divAbstract

The impact of different fertiliser management options and cultivars on nitrogen use efficiency and yield for rice cropping in the Indo-Gangetic Plain: two seasons of methane, nitrous oxide and ammonia emissions

This study presents detailed crop and gas flux data from two years of rice production at the experimental farm of the ICAR-Indian Agricultural Research Institute, New Delhi, India. In comparing 4 nitrogen (N) fertiliser regimes across 4 rice cultivars (CRD 310, IR-64, MTU 1010, P-44), we have added to growing evidence of the environmental costs of rice production in the region. The study shows that rice cultivar can impact yields of both grain, and total biomass produced in given circumstances, with the CRD 310 cultivar showing consistently high nitrogen use efficiency (NUE) for total biomass compared with other tested varieties, but not necessarily with the highest grain yield, which was P-44 in this experiment. While NUE of the rice did vary depending on experimental treatments (ranging from 41% to 73%), 73%), this did not translate directly into the reduction of emissions of ammonia (NH3) and nitrous oxide (N2O). Emissions were relatively similar across the different rice cultivars regardless of NUE. Conversely, agronomic practices that reduced total N losses were associated with higher yield. In terms of fertiliser application, the outstanding impact was of the very high methane (CH4) emissions as a result of incorporating farmyard manure (FYM) into rice paddies, which dominated the overall effect on global warming potential. While the use of nitrification and urease inhibiting substances decreased N2O emissions overall, NH3 emissions were relatively unaffected (or slightly higher). Overall, the greatest reduction in greenhouse gas (GHG) emissions came from reducing irrigation water added to the fields, resulting in higher N2O, but significantly less CH4 emissions, reducing net GHG emission compared with continuous flooding. Overall, genetic differences generated more variation in yield and NUE than agronomic management (excluding controls), whereas agronomy generated larger differences than genetics concerning gaseous losses. This study suggests that a mixed approach needs to be applied when attempting to reduce pollution and global warming potential from rice production and potential pollution swapping and synergies need to be considered. Finding the right balance of rice cultivar, irrigation technique and fertiliser type could significantly reduce emissions, while getting it wrong can result in considerably poorer yields and higher pollution

Efficient perovskite solar cells by metal ion doping

Realizing the theoretical limiting power conversion efficiency (PCE) in perovskite solar cells requires a better understanding and control over the fundamental loss processes occurring in the bulk of the perovskite layer and at the internal semiconductor interfaces in devices. One of the main challenges is to eliminate the presence of charge recombination centres throughout the film which have been observed to be most densely located at regions near the grain boundaries. Here, we introduce aluminium acetylacetonate to the perovskite precursor solution, which improves the crystal quality by reducing the microstrain in the polycrystalline film. At the same time, we achieve a reduction in the non-radiative recombination rate, a remarkable improvement in the photoluminescence quantum efficiency (PLQE) and a reduction in the electronic disorder deduced from an Urbach energy of only 12.6 meV in complete devices. As a result, we demonstrate a PCE of 19.1% with negligible hysteresis in planar heterojunction solar cells comprising all organic p and n-type charge collection layers. Our work shows that an additional level of control of perovskite thin film quality is possible via impurity cation doping, and further demonstrates the continuing importance of improving the electronic quality of the perovskite absorber and the nature of the heterojunctions to further improve the solar cell performance

Search for new physics in multijet events with at least one photon and large missing transverse momentum in proton-proton collisions at 13 TeV

A search for new physics in final states consisting of at least one photon, multiple jets, and large missing transverse momentum is presented, using proton-proton collision events at a center-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 137 fb−1, recorded by the CMS experiment at the CERN LHC from 2016 to 2018. The events are divided into mutually exclusive bins characterized by the missing transverse momentum, the number of jets, the number of b-tagged jets, and jets consistent with the presence of hadronically decaying W, Z, or Higgs bosons. The observed data are found to be consistent with the prediction from standard model processes. The results are interpreted in the context of simplified models of pair production of supersymmetric particles via strong and electroweak interactions. Depending on the details of the signal models, gluinos and squarks of masses up to 2.35 and 1.43 TeV, respectively, and electroweakinos of masses up to 1.23 TeV are excluded at 95% confidence level

Observation of the Rare Decay of the η Meson to Four Muons

A search for the rare η→μ+μ−μ+μ− double-Dalitz decay is performed using a sample of proton-proton collisions, collected by the CMS experiment at the CERN LHC with high-rate muon triggers during 2017 and 2018 and corresponding to an integrated luminosity of 101  fb−1. A signal having a statistical significance well in excess of 5 standard deviations is observed. Using the η→μ+μ− decay as normalization, the branching fraction B(η→μ+μ−μ+μ−)=[5.0±0.8(stat)±0.7(syst)±0.7(B2μ)]×10−9 is measured, where the last term is the uncertainty in the normalization channel branching fraction. This work achieves an improved precision of over 5 orders of magnitude compared to previous results, leading to the first measurement of this branching fraction, which is found to agree with theoretical predictions

Search for Scalar Leptoquarks Produced via τ-Lepton-Quark Scattering in pppp Collisions at s=13TeV\sqrt{s}=13 TeV

The first search for scalar leptoquarks produced in τ-lepton–quark collisions is presented. It is based on a set of proton-proton collision data recorded with the CMS detector at the LHC at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 138  fb$^{−1}$. The reconstructed final state consists of a jet, significant missing transverse momentum, and a τ lepton reconstructed through its hadronic or leptonic decays. Limits are set on the product of the leptoquark production cross section and branching fraction and interpreted as exclusions in the plane of the leptoquark mass and the leptoquark-τ-quark coupling strength