539 research outputs found
Origin of large moments in MnSi at small x
Recently, the magnetic moment/Mn, , in MnSi was measured to be
5.0 /Mn, at =0.1%. To understand this observed , we investigate
several MnSi models of alloys using first-principles density
functional methods. The only model giving was a 513-atom cell having
the Mn at a substitutional site, and Si at a second-neighbor interstitial site.
The observed large moment is a consequence of the weakened d-p hybridization
between the Mn and one of its nearest neighbor Si atoms, resulting from the
introduction of the second-neighbor interstitial Si. Our result suggests a way
to tune the magnetic moments of transition metal doped semiconductors.Comment: 4 pages, 2 figure
Eye-Safe Solid-State Quasi-CW Raman Laser with Millisecond Pulse Duration
We demonstrate the first quasi-CW (ms-long pulses, pump duty cycle of 10%)
end-diode pumped solid state laser generating eye-safe radiation via
intracavity Raman conversion. The output power at the first Stokes wavelength
(1524 nm) was 250 mW. A theoretical model was applied to analyze the laser
system and provide routes for optimization. The possibility of true CW
operation was discussed.Comment: Preprint accepted for publication in Optics Communications on Feb 6,
201
Half metallic digital ferromagnetic heterostructure composed of a -doped layer of Mn in Si
We propose and investigate the properties of a digital ferromagnetic
heterostructure (DFH) consisting of a -doped layer of Mn in Si, using
\textit{ab initio} electronic-structure methods. We find that (i) ferromagnetic
order of the Mn layer is energetically favorable relative to antiferromagnetic,
and (ii) the heterostructure is a two-dimensional half metallic system. The
metallic behavior is contributed by three majority-spin bands originating from
hybridized Mn- and nearest-neighbor Si- states, and the corresponding
carriers are responsible for the ferromagnetic order in the Mn layer. The
minority-spin channel has a calculated semiconducting gap of 0.25 eV. Analysis
of the total and partial densities of states, band structure, Fermi surfaces
and associated charge density reveals the marked two-dimensional nature of the
half metallicity. The band lineup is found to be favorable for retaining the
half metal character to near the Curie temperature (). Being Si based
and possibly having a high as suggested by an experiment on dilutely
doped Mn in Si, the heterostructure may be of special interest for integration
into mature Si technologies for spintronic applications.Comment: 4 pages, 4 figures, Revised version, to appear in Phys. Rev. Let
Angular sensitivity of blowfly photoreceptors: intracellular measurements and wave-optical predictions
The angular sensitivity of blowfly photoreceptors was measured in detail at wavelengths λ = 355, 494 and 588 nm.
The measured curves often showed numerous sidebands, indicating the importance of diffraction by the facet lens.
The shape of the angular sensitivity profile is dependent on wavelength. The main peak of the angular sensitivities at the shorter wavelengths was flattened. This phenomenon as well as the overall shape of the main peak can be quantitatively described by a wave-optical theory using realistic values for the optical parameters of the lens-photoreceptor system.
At a constant response level of 6 mV (almost dark adapted), the visual acuity of the peripheral cells R1-6 is at longer wavelengths mainly diffraction limited, while at shorter wavelengths the visual acuity is limited by the waveguide properties of the rhabdomere.
Closure of the pupil narrows the angular sensitivity profile at the shorter wavelengths. This effect can be fully described by assuming that the intracellular pupil progressively absorbs light from the higher order modes.
In light-adapted cells R1-6 the visual acuity is mainly diffraction limited at all wavelengths.
Impact of fluorescence on Raman remote sensing of temperature in natural water samples
© 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement A comprehensive investigation into the impact of spectral baseline on temperature prediction in natural marine water samples by Raman spectroscopy is presented. The origin of baseline signals is investigated using principal component analysis and phytoplankton cultures in laboratory experiments. Results indicate that fluorescence from photosynthetic pigments and dissolved organic matter may overlap with the Raman peak for 532 nm excitation and compromise the accuracy of temperature predictions. Two methods of spectral baseline correction in natural waters are evaluated: a traditional tilted baseline correction and a new correction by temperature marker values, with accuracies as high as ± 0.2°C being achieved in both cases
Synthesis and biological evaluation of platinum complexes of highly functionalized aroylaminocarbo-N-thioyl prolinate containing tetrahydropyrrolo[3,4-c]pyrrole-1,3(2H,3aH)-dione moieties
Platinum complexes, derived from two families of bidentate funcionalized aroylaminocarbo-N-thyoyl prolinates, are prepared using mild conditions from prolinates, which are available via 1,3-dipolar cycloadditions. The resulting four coordinated neutral square-planar platinum(II) complexes are very stable and are fully characterized. Their structures are determined by spectroscopic and analytical methods and one of them by single crystal X-ray diffraction analysis. In this pattern, the platinum exhibits distorted square planar geometry, with cis-bond angles ranging from 89.42(2) and 94.37(6)° and trans-bond angles of 176.19(6) and 177.08(6)°, respectively. Anti(myco)bacterial and antifungal studies of all these new compounds are carried out under standardized protocols.This work is a part of Samet Belveren's ongoing PhD thesis granted by Mersin University (Project no. BAP-SBE TEB(SB) 2017-2-TP3-2564). We gratefully acknowledge financial support from Mersin University and the Spanish Ministerio de EconomÃa y Competitividad (MINECO) (projects CTQ2013-43446-P and CTQ2014-51912-REDC), the Spanish Ministerio de EconomÃa, Industria y Competitividad, Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, EU) (projects CTQ2016-76782-P and CTQ2016-81797-REDC), the Generalitat Valenciana (PROMETEOII/2014/017), University of Alicante and Mersin University (Project. MEU-2017-COL-01007-M150D)
Focus issue introduction: Advanced solid-state lasers 2020
This Joint Issue of Optics Express and Optical Materials Express features 15 articles written by authors who participated in the international online conference Advanced Solid State Lasers held 13–16 October, 2020. This review provides a summary of the conference and these articles from the conference which sample the spectrum of solid state laser theory and experiment, from materials research to sources and from design innovation to applications
Recommended from our members
Large-scale quantum mechanical simulations of high-Z metals
High-Z metals constitute a particular challenge for large-scale ab initio calculations, as they require high resolution due to the presence of strongly localized states and require many eigenstates to be computed due to the large number of electrons and need to accurately resolve the Fermi surface. Here, we report recent findings on high-Z materials, using an efficient massively parallel planewave implementation on some of the largest computational architectures currently available. We discuss the particular architectures employed and methodological advances required to harness them effectively. We present a pair-correlation function for U, calculated using quantum molecular dynamics, and discuss relaxations of Pu atoms in the vicinity of defects in aged and alloyed Pu. We find that the self-irradiation associated with aging has a negligible effect on the compressibility of Pu relative to other factors such as alloying
Self-repair ability of evolved self-assembling systems in cellular automata
Self-repairing systems are those that are able to reconfigure themselves following disruptions to bring them back into a defined normal state. In this paper we explore the self-repair ability of some cellular automata-like systems, which differ from classical cellular automata by the introduction of a local diffusion process inspired by chemical signalling processes in biological development. The update rules in these systems are evolved using genetic programming to self-assemble towards a target pattern. In particular, we demonstrate that once the update rules have been evolved for self-assembly, many of those update rules also provide a self-repair ability without any additional evolutionary process aimed specifically at self-repair
Purely infinite simple C*-algebras that are principal groupoid C*-algebras
From a suitable groupoid G, we show how to construct an amenable principal
groupoid whose C*-algebra is a Kirchberg algebra which is KK-equivalent to
C*(G). Using this construction, we show by example that many UCT Kirchberg
algebras can be realised as the C*-algebras of amenable principal groupoids.Comment: 20 pages, 1 picture prepared using Tik
- …