109 research outputs found
Quantitative analysis of electronic transport through weakly-coupled metal/organic interfaces
Using single-crystal transistors, we have performed a systematic experimental
study of electronic transport through oxidized copper/rubrene interfaces as a
function of temperature and bias. We find that the measurements can be
reproduced quantitatively in terms of the thermionic emission theory for
Schottky diodes, if the effect of the bias-induced barrier lowering is
included. Our analysis emphasizes the role of the coupling between metal and
molecules, which in our devices is weak due to the presence of an oxide layer
at the surface of the copper electrodes.Comment: 4 pages, 3 figure
Impact of Conservation Agriculture on Soil Erosion in the Annual Cropland of the Apulia Region (Southern Italy) Based on the RUSLE-GIS-GEE Framework
The processes of soil erosion and land degradation are more rapid in the case of inappropriate agricultural management, which leads to increased soil loss rates. Moreover, climatic conditions are one of the most important determining factors affecting agriculture, especially in the Mediterranean areas featuring irregular rainfall and high summer temperatures. Conservation agriculture (CA) can make a significant contribution to reducing soil erosion risk on the annual cropland (ACL) of the Mediterranean region in comparison with conventional management (CM). The objective of this study is to provide soil loss rate maps and calculate the values for each altitude and slope class and their combination for the Apulia region in four annual production cycles for the scenarios CM and CA. The present study estimates the significance of the adoption of CA on soil erosion assessment at regional scale based on the Revised Universal Soil Loss Equation (RUSLE) model. The parameters of the RUSLE model were estimated by using remote sensing (RS) data. The erosion probability zones were determined through a Geographic Information System (GIS) and Google Earth Engine (GEE) approach. Digital terrain model (DTM) at 8 m, ACL maps of the Apulia region, and rainfall and soil data were used as an input to identify the most erosion-prone areas. Our results show a 7.5% average decrease of soil loss rate during the first period of adoption of the four-year crop cycle—from 2.3 t ha−1 y−1 with CM to 2.1 t ha−1 y−1 with the CA system. CA reduced soil loss rate compared to CM in all classes, from 10.1% in hill class to 14.1% for hill + low slope class. These results can therefore assist in the implementation of effective soil management systems and conservation practices to reduce soil erosion risk in the Apulia region and in the Mediterranean basin more generally
Evaporative Deposition Patterns Revisited: Spatial Dimensions of the Deposit
A model accounting for finite spatial dimensions of the deposit patterns in
the evaporating sessile drops of colloidal solution on a plane substrate is
proposed. The model is based on the assumption that the solute particles occupy
finite volume and hence these dimensions are of the steric origin. Within this
model, the geometrical characteristics of the deposition patterns are found as
functions of the initial concentration of the solute, the initial geometry of
the drop, and the time elapsed from the beginning of the drying process. The
model is solved analytically for small initial concentrations of the solute and
numerically for arbitrary initial concentrations of the solute. The agreement
between our theoretical results and the experimental data is demonstrated, and
it is shown that the observed dependence of the deposit dimensions on the
experimental parameters can indeed be attributed to the finite dimensions of
the solute particles. These results are universal and do not depend on any free
or fitting parameters; they are important for understanding the evaporative
deposition and may be useful for creating controlled deposition patterns.Comment: 34 pages, 14 figures, LaTeX; submitted to Physical Review
Evaluation of the irradiation treatment effects on ancient parchment samples
In this work, the effect of X-ray irradiation as a disinfection treatment in original ancient parchment samples, belonging to a discarded book cover of a 16th-century archival register, has been evaluated. Specifically, the bacterial and fungal species isolated from the book cover have been characterized and then irradiated with increasing doses of X-rays with the aim to evaluate the effectiveness of the antimicrobial protocol on the isolated microorganisms. The deterioration effects induced by the X-ray treatment as well as the natural aging on the collagen matrix of the parchment sample have been tested by employing several techniques, namely, Light Transmission Analysis, Fiber Optic Reflectance Spectroscopy, Attenuated Total Reflectance-Fourier Transformed Infrared spectroscopy, UV Resonant Raman spectroscopy and Atomic Force Microscopy. The results reveal that the irradiation treatment applied to our ancient parchment samples deteriorated by biological attack and other naturally occurring phenomena, possibly associated with inappropriate conservation conditions, does not seem to induce further damage factors even when large doses of irradiation are employed. The X-rays-based disinfection treatment effects are limited on the collagen support and this confirms the potential of this method in mass disinfection of library and archival materials
GM1 Ganglioside role in the interaction of Alpha-synuclein with lipid membranes: Morphology and structure
Alpha-Synuclein (AS) is the protein playing the major role in Parkinson's disease (PD), a neurological disorder characterized by the degeneration of dopaminergic neurons and the accumulation of AS into amyloid plaques. The aggregation of AS into intermediate aggregates, called oligomers, and their pathological relation with biological membranes are considered key steps in the development and progression of the disease. Here we propose a multi-technique approach to study the effects of AS in its monomeric and oligomeric forms on artificial lipid membranes containing GM1 ganglioside. GM1 is a component of functional membrane micro-domains, called lipid rafts, and has been demonstrated to bind AS in neurons. With the aim to understand the relation between gangliosides and AS, here we exploit the complementarity of microscopy (Atomic Force Microscopy) and neutron scattering (Small Angle Neutron Scattering and Neutron Reflectometry) techniques to analyze the structural changes of two different membranes (Phosphatidylcholine and Phosphatidylcholine/GM1) upon binding with AS. We observe the monomer- and oligomer-interactions are both limited to the external membrane leaflet and that the presence of ganglioside leads to a stronger interaction of the membranes and AS in its monomeric and oligomeric forms with a stronger aggressiveness in the latter. These results support the hypothesis of the critical role of lipid rafts not only in the biofunctioning of the protein, but even in the development and the progression of the Parkinson's disease
Semi-classical study of the Quantum Hall conductivity
The semi-classical study of the integer Quantum Hall conductivity is
investigated for electrons in a bi-periodic potential .
The Hall conductivity is due to the tunnelling effect and we concentrate our
study to potentials having three wells in a periodic cell. A non-zero
topological conductivity requires special conditions for the positions, and
shapes of the wells. The results are derived analytically and well confirmed by
numerical calculations.Comment: 23 pages, 13 figure
Severity of Hepatocyte Damage and Prognosis in Cirrhotic Patients Correlate with Hepatocyte Magnesium Depletion
We aimed to evaluate the magnesium content in human cirrhotic liver and its correlation with serum AST levels, expression of hepatocellular injury, and MELDNa prognostic score. In liver biopsies obtained at liver transplantation, we measured the magnesium content in liver tissue in 27 cirrhotic patients (CIRs) and 16 deceased donors with healthy liver (CTRLs) by atomic absorption spectrometry and within hepatocytes of 15 CIRs using synchrotron-based X-ray fluorescence microscopy. In 31 CIRs and 10 CTRLs, we evaluated the immunohistochemical expression in hepatocytes of the transient receptor potential melastatin 7 (TRPM7), a magnesium influx chanzyme also involved in inflammation. CIRs showed a lower hepatic magnesium content (117.2 (IQR 110.5-132.9) vs. 162.8 (IQR 155.9-169.8) mu g/g; p < 0.001) and a higher percentage of TRPM7 positive hepatocytes (53.0 (IQR 36.8-62.0) vs. 20.7 (10.7-32.8)%; p < 0.001) than CTRLs. In CIRs, MELDNa and serum AST at transplant correlated: (a) inversely with the magnesium content both in liver tissue and hepatocytes; and (b) directly with the percentage of hepatocytes stained intensely for TRPM7. The latter also directly correlated with the worsening of MELDNa at transplant compared to waitlisting. Magnesium depletion and overexpression of its influx chanzyme TRPM7 in hepatocytes are associated with severity of hepatocyte injury and prognosis in cirrhosis. These data represent the pathophysiological basis for a possible beneficial effect of magnesium supplementation in cirrhotic patients
Spacial and temporal dynamics of the volume fraction of the colloidal particles inside a drying sessile drop
Using lubrication theory, drying processes of sessile colloidal droplets on a
solid substrate are studied. A simple model is proposed to describe temporal
dynamics both the shape of the drop and the volume fraction of the colloidal
particles inside the drop. The concentration dependence of the viscosity is
taken into account. It is shown that the final shapes of the drops depend on
both the initial volume fraction of the colloidal particles and the capillary
number. The results of our simulations are in a reasonable agreement with the
published experimental data. The computations for the drops of aqueous solution
of human serum albumin (HSA) are presented.Comment: Submitted to EPJE, 7 pages, 8 figure
INVESTIGATING THE SEISMIC RESPONSE OF URM WALLS WITH IRREGULAR OPENING LAYOUT THROUGH DIFFERENT MODELING APPROACHES
The façade and internal walls of unreinforced masonry (URM) buildings often present an irregular opening layout, due to architectural reasons or modifications to the structure, which make the expected seismic damage pattern less predictable a priori. Therefore, the discretization of the walls in structural components is not standardized, conversely to cases with a regular opening layout for which the available modeling methods are corroborated by seismic damage surveys reporting recurrent failure patterns. The structural component discretization is a relevant step for the code-conforming seismic assessment, typically based on comparing the internal forces and drifts of each component to strength criteria and drift thresholds. Therefore, the lack of well-established approaches can significantly influence the assessment. The issue is even more evident when the structural components must be identified a priori in the modeling stage, namely for equivalent frame models. The applicability of available methods for discretization of URM walls with irregular opening layout has been already investigated in literature, but a conclusive judgment requires further studies. In this context, this paper presents an overview of the preliminary results addressing the numerical modeling of this type of walls within the framework of the DPC-ReLUIS 2022-2024 project (Subtask 10.3), funded by the Italian Department of Civil Protection. The Subtask aims to propose consensus-based recommendations for researchers and practitioners which can contribute to harmonize the use of different modeling approaches. Seven research groups are involved in the research, adopting different modeling approaches and computer codes, but similar assumptions and the same analysis method (pushover) are used. The benchmark URM structure illustrated in the paper is a two-story wall from which four configurations with increasing irregularity of opening layout were derived. The results of four modeling approached are presented. Three of them reproduce the mechanical response of masonry at the material scale by means of FE models implemented in OpenSees, DIANA and Abaqus software, while the remaining approach describes the mechanical response of masonry at the macro-element scale in 3DMacro software. Results were compared in terms of capacity curves, predicted failure mechanisms and evolution of internal forces in piers. The adoption of consistent assumptions among the different approaches led to an overall agreement of predictions at both wall and pier scales, particularly in terms of damage pattern with higher concentration of damage at the ground story. Despite that, differences on the pushover curves have been highlighted. They are mainly due to some deviations of the internal forces in squat piers deriving from a complex load flow in these elements
Investigating the seismic response of URM walls with irregular opening layout through different modeling approaches
TThe façade and internal walls of unreinforced masonry (URM) buildings often present an
irregular opening layout, due to architectural reasons or modifications to the structure, which
make the expected seismic damage pattern less predictable a priori. Therefore, the
discretization of the walls in structural components is not standardized, conversely to cases
with a regular opening layout for which the available modeling methods are corroborated by
seismic damage surveys reporting recurrent failure patterns. The structural component
discretization is a relevant step for the code-conforming seismic assessment, typically based
on comparing the internal forces and drifts of each component to strength criteria and drift
thresholds. Therefore, the lack of well-established approaches can significantly influence the
assessment. The issue is even more evident when the structural components must be identified
a priori in the modeling stage, namely for equivalent frame models. The applicability of
available methods for discretization of URM walls with irregular opening layout has been
already investigated in literature, but a conclusive judgment requires further studies.
In this context, this paper presents an overview of the preliminary results addressing the
numerical modeling of this type of walls within the framework of the DPC-ReLUIS 2022-2024
project (Subtask 10.3), funded by the Italian Department of Civil Protection. The Subtask
aims to propose consensus-based recommendations for researchers and practitioners which
can contribute to harmonize the use of different modeling approaches. Seven research groups
are involved in the research, adopting different modeling approaches and computer codes,
but similar assumptions and the same analysis method (pushover) are used. The benchmark
URM structure illustrated in the paper is a two-story wall from which four configurations
with increasing irregularity of opening layout were derived. The results of four modeling
approached are presented. Three of them reproduce the mechanical response of masonry at
the material scale by means of FE models implemented in OpenSees, DIANA and Abaqus
software, while the remaining approach describes the mechanical response of masonry at the
macro-element scale in 3DMacro software. Results were compared in terms of capacity
curves, predicted failure mechanisms and evolution of internal forces in piers. The adoption
of consistent assumptions among the different approaches led to an overall agreement of
predictions at both wall and pier scales, particularly in terms of damage pattern with higher
concentration of damage at the ground story. Despite that, differences on the pushover curves
have been highlighted. They are mainly due to some deviations of the internal forces in squat
piers deriving from a complex load flow in these elements.DPC - Dipartimento della Protezione Civile, Presidenza del Consiglio dei Ministri(LA/P/0112/2020
- …