Extraction of Scandium (III) from acidic solutions using organo-phosphoric acid reagents: A comparative study

Comparative and synergistic solvent extraction of Sc(III) using two phosphoric acidic reagents such as di-(2-ethyhexyl) phosphoric acid and 2,4,4,tri-methyl,pentyl-phosphinic acid was investigated. Slope analysis method suggests a cation exchange reaction of Sc(III) with both extractants at a molar ratio of extractant: Sc(III) = 2.5:1 at equilibrium pH< 1.5. The plot of log D vs. log [Extractant] yield the slope (n) value as low as 1.2-1.3 and as high as n=7 at low and high extrcatant concentration level, respectively. Extraction isotherm study predicted the need of 2 stages at A: O=1:4 and A: O=1:3 using 0.1 M D2EHPA and 0.1 M Cyanex 272, respectively. Stripping of Sc (III) was carried out at varied NaOH concentration to ascertain the optimum stripping condition for effective enrichment of metal. The predicted stripping condition (2)-stages with A: O=1:3 and 1:4 for D2EHPA and Cyanex 272, respectively) obtained from Mc-Cabe Thiele plot was further validated by 6-cycles CCS study. An actual leach solution of Mg-Sc alloy bearing 1.0 g/L of Sc (III), 2.5 g/L of Mg and 0.2 M HCl was subjected for selective separation of Sc at the optimum condition. The counter current simulation (CCS) study for both extraction and stripping of actual solution resulted quantitative separation of Sc with ∼12 fold enrichment. The organic phase before and after loading of Sc (III) along with the diluents was characterized by FTIR to ascertain the phase transportation of Sc (III)

Integrated multisectoral strategy to improve girls' and women's nutrition before conception, during pregnancy and after birth in India (Swabhimaan): protocol for a prospective, non-randomised controlled evaluation

INTRODUCTION: Swabhimaan is a community-based programme to improve adolescent girls’ and women’s nutrition in the rural areas of three Indian states—Bihar, Chhattisgarh and Odisha with high prevalence of undernutrition. METHODS AND ANALYSIS: Swabhimaan has a nested prospective, non-randomised controlled evaluation. Since 2017, five intervention sites receive community-led interventions through national government’s livelihood mission supported women’s self-help group federations and five control sites will initiate these activities 36 months later, in 2020. Community-led activities aim to improve coverage of 18 interventions including adequacy of food consumed, prevention of micronutrient deficiencies, access to basic health services and special care of nutritionally ‘at risk’ girls and women, improving hygiene and access to water and sanitation services and access to family planning services. The evaluation includes baseline (2016–2017), midline (2018–2019) and endline (2020–2021) surveys covering 6638 adolescent girls, 2992 pregnant women and 8755 mothers of children under 2. The final impact analysis will be by intention to treat, comparing primary and secondary outcomes in five intervention areas and five control areas. The primary outcomes are: (1) a 15% reduction in the proportion of adolescent girls with a body mass index (BMI) <18.5 kg/m2; (2) a 15% reduction in the proportion of mothers of children under two with a BMI <18.5 kg/m2 and (3) and a 0.4 cm improvement in mean mid-upper arm circumference among pregnant women. ETHICS AND DISSEMINATION: All procedures involving human subjects were approved by the Institutional Ethics Committee of the All India Institute of Medical Sciences, Bihar, Chhattisgarh and Odisha and in compliance with guidelines laid down in the Declaration of Helsinki. Evidence will inform maternal and preconception nutrition policy at national and state level. TRIAL REGISTRATION NUMBER: 58261b2f46876 and CTRI/2016/11/007482; Pre-results

New FTY720-docetaxel nanoparticle therapy overcomes FTY720-induced lymphopenia and inhibits metastatic breast tumour growth

Purpose: Combining molecular therapies with chemotherapy may offer an improved clinical outcome for chemoresistant tumours. Sphingosine-1-phosphate (S1P) receptor antagonist and sphingosine kinase 1 (SK1) inhibitor FTY720 (FTY) has promising anticancer properties, however, it causes systemic lymphopenia which impairs its use in cancer patients. In this study, we developed a nanoparticle (NP) combining docetaxel (DTX) and FTY for enhanced anticancer effect, targeted tumour delivery and reduced systemic toxicity. Methods: Docetaxel, FTY and glucosamine were covalently conjugated to poly(lactic-co-glycolic acid) (PLGA). NPs were characterised by dynamic light scattering and electron microscopy. The cellular uptake, cytotoxicity and in vivo antitumor efficacy of CNPs were evaluated. Results: We show for the first time that in triple negative breast cancer cells FTY provides chemosensitisation to DTX, allowing a four-fold reduction in the effective dose. We have encapsulated both drugs in PLGA complex NPs (CNPs), with narrow size distribution of ~ 100 nm and excellent cancer cell uptake providing sequential, sustained release of FTY and DTX. In triple negative breast cancer cells and mouse breast cancer models, CNPs had similar efficacy to systemic free therapies, but allowed an effective drug dose reduction. Application of CNPs has significantly reversed chemotherapy side effects such as weight loss, liver toxicity and, most notably, lymphopenia. Conclusions: We show for the first time the DTX chemosensitising effects of FTY in triple negative breast cancer. We further demonstrate that encapsulation of free drugs in CNPs can improve targeting, provide low off-target toxicity and most importantly reduce FTY-induced lymphopenia, offering potential therapeutic use of FTY in clinical cancer treatment

Human-Centered Design Components in Spiral Model to Improve Mobility of Older Adults

As humans grow older, their cognitive needs change more frequently due to distal and proximal life events. Designers and developers need to come up with better designs that integrate older users’ needs in a short period of time with more interaction with the users. Therefore, the positioning of human end users in the center of the design itself is not the key to the success of design artifacts while designing applications for older adults to use a smartphone as a promising tool for journey planner while using public transportation. This study analyzed the use of human-centered design (HCD) components, the spiral model, and the design for failure (DfF) approach to improve the interactions between older users and designers/developers in gathering usability needs in the concept stage and during the development of the app with short iterative cycles. To illustrate the importance of the applied approach, a case study with particular focus on older adults is presented.The results presented in this study are based on “Assistant” project funded by AAL JP, co-funded by the European Union. The authors would like to thank Dr. Stefan Carmien, my colleague in Assistant, for mentoring and for reading and making comments in the earlier versions of this chapter; participating research institutes; funding agencies; and companies from Finland, Spain, Austria, France, and the United Kingdom for their active support throughout the project

Enzymatically crosslinked Tyramine-Gellan gum hydrogels as drug delivery system for rheumatoid arthritis treatment

Rheumatoid arthritis (RA) is a chronic inflammatory disease characterized by joint synovial inflammation, as well as cartilage and bone tissue destruction. Current strategies for the treatment of RA can reduce joint inflammation, but the treatment options still represent stability concerns since they are not sufficient and present a fast clearing. Thus, several drug delivery systems (DDS) have been advanced to tackle this limitation. Injectable gellan gum (GG) hydrogels, reduced by physical crosslinking methods, also being proposed as DDS, but this kind of crosslinking can produce hydrogels that become weaker in physiological conditions. Nevertheless, enzymatic crosslinking emerged as an alternative to increase mechanical strength, which can be adjusted by the degree of enzymatic crosslinking. In this study, tyramine-modified gellan gum (Ty-GG) hydrogels were developed via horseradish peroxidase (HRP) crosslinking; and betamethasone was encapsulated within, to increase the specificity and safety in the treatment of patients with RA. Physicochemical results showed that it was possible to modify GG with tyramine, with a degree of substitution of approximately 30%. They showed high mechanical strength and resistance, presenting a controlled betamethasone release profile over time. Ty-GG hydrogels also exhibited no cytotoxic effects and do not negatively affected the metabolic activity and proliferation of chondrogenic primary cells. Furthermore, the main goal was achieved since betamethasone-loaded Ty-GG hydrogels demonstrated to have a more effective therapeutic effect when compared with the administration of betamethasone alone. Therefore, the developed Ty-GG hydrogels represent a promising DDS and a reliable alternative to traditional treatments in patients with RANorte2020 project (“NORTE-08-5369-FSE-000044”), REMIX project (G.A. 778078 — REMIX — H2020-MSCA-RISE-2017), and Gilson Lab, Chonbuk National University, Republic of Korea. The FCT distinction attributed to J. Miguel Oliveira under the Investigator FCT program (IF/01285/2015) is also greatly acknowledged. C. Gonçalves also wish to acknowledge FCT for supporting her research (No. SFRH/BPD/94277/2013

Solar Coronal Plumes

Polar plumes are thin long ray-like structures that project beyond the limb of the Sun polar regions, maintaining their identity over distances of several solar radii. Plumes have been first observed in white-light (WL) images of the Sun, but, with the advent of the space era, they have been identified also in X-ray and UV wavelengths (XUV) and, possibly, even in in situ data. This review traces the history of plumes, from the time they have been first imaged, to the complex means by which nowadays we attempt to reconstruct their 3-D structure. Spectroscopic techniques allowed us also to infer the physical parameters of plumes and estimate their electron and kinetic temperatures and their densities. However, perhaps the most interesting problem we need to solve is the role they cover in the solar wind origin and acceleration: Does the solar wind emanate from plumes or from the ambient coronal hole wherein they are embedded? Do plumes have a role in solar wind acceleration and mass loading? Answers to these questions are still somewhat ambiguous and theoretical modeling does not provide definite answers either. Recent data, with an unprecedented high spatial and temporal resolution, provide new information on the fine structure of plumes, their temporal evolution and relationship with other transient phenomena that may shed further light on these elusive features

Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments

Composite shells, which are being widely used in engineering applications, are often under thermal loads. Thermal loads usually bring thermal stresses in the structure which can significantly affect its static and dynamic behaviors. One of the possible solutions for this matter is embedding Shape Memory Alloy (SMA) wires into the structure. In the present study, thermal buckling and free vibration of laminated composite cylindrical shells reinforced by SMA wires are analyzed. Brinson model is implemented to predict the thermo-mechanical behavior of SMA wires. The natural frequencies and buckling temperatures of the structure are obtained by employing Generalized Differential Quadrature (GDQ) method. GDQ is a powerful numerical approach which can solve partial differential equations. A comparative study is carried out to show the accuracy and efficiency of the applied numerical method for both free vibration and buckling analysis of composite shells in thermal environment. A parametric study is also provided to indicate the effects of like SMA volume fraction, dependency of material properties on temperature, lay-up orientation, and pre-strain of SMA wires on the natural frequency and buckling of Shape Memory Alloy Hybrid Composite (SMAHC) cylindrical shells. Results represent the fact that SMAs can play a significant role in thermal vibration of composite shells. The second goal of present work is optimization of SMAHC cylindrical shells in order to maximize the fundamental frequency parameter at a certain temperature. To this end, an eight-layer composite shell with four SMA-reinforced layers is considered for optimization. The primary optimization variables are the values of SMA angles in the four layers. Since the optimization process is complicated and time consuming, Genetic Algorithm (GA) is performed to obtain the orientations of SMA layers to maximize the first natural frequency of structure. The optimization results show that using an optimum stacking sequence for SMAHC shells can increase the fundamental frequency of the structure by a considerable amount