Investigations on the hierarchy of reference frames in geodesy and geodynamics

Problems related to reference directions were investigated. Space and time variant angular parameters are illustrated in hierarchic structures or towers. Using least squares techniques, model towers of triads are presented which allow the formation of linear observation equations. Translational and rotational degrees of freedom (origin and orientation) are discussed along with and the notion of length and scale degrees of freedom. According to the notion of scale parallelism, scale factors with respect to a unit length are given. Three-dimensional geodesy was constructed from the set of three base vectors (gravity, earth-rotation and the ecliptic normal vector). Space and time variations are given with respect to a polar and singular value decomposition or in terms of changes in translation, rotation, deformation (shear, dilatation or angular and scale distortions)

On the development of bainitic alloys for railway wheel applications

The ferrite-pearlite microstructure is the most popular microstructure for alloys used in structural applications, including railway wagon wheels. These alloys have been designed through alloying and thermomechanical processing to have a refined microstructure. Ferritepearlite alloys are low cost, weldable, have good fabricability, and are reliable under extreme conditions. Given these performance attributes, it seems unlikely then that their dominant position as structural steels would ever be challenged by alternative microstructures. One major achievement in the development of ferrite-pearlite steels has been in the refinement of their interlamellar spacing to very fine distances of the order of < 0.3 μm. A refined microstructure increases the hardness of the alloy, thus increasing its life under wear conditions. The interlamellar spacing in pearlitic steels has, however, been refined almost to its theoretical limit. The increasing demand for speed and increased axle loading on railway wagons requires the use of stronger, tougher, and more durable materials. This has opened the window for the development of novel bainitic steels. Bainitic alloys have a higher level of microstructural refinement than pearlitic ones. They have shown to have good wear resistance and rolling-contact fatigue resistance, and high toughness. This paper will discuss the progress to date on the development of bainitic railway wheel alloys. Four alloy chemistries have been chosen for possible further development.This paper was first presented at the ZrTa2011 New Metals Development Network Conference, 12–14 October 2011, Mount Grace Country House & Spa, Magaliesburg.Mintek and AMI-FMDNhttp://www.saimm.co.za/ai201

The influence of thermomechanical processing on the surface quality of an AISI 436 ferritic stainless steel

The need to reduce weight while maintaining good mechanical properties in materials used in the automotive industry has over the years seen an increased exploitation of various steels to meet this new demand. In line with this development, the ferritic stainless steel family has seen a wide application in this industry, with the AISI 436 type increasingly being used for automotive trims and mufflers for exhaust systems, as well as a significant part of this steel’s application being for the manufacture of wheel nuts and wheel nut caps in trucks, mainly through the deep drawing process. However, there have been reports of some poor surface roughening of this material during deep drawing, with tearing and/or cracking also reported in some instances. This has been suspected to possibly be associated with some local differences in localized mechanical properties between grains and grain clusters of the rolled and annealed material. In order to investigate the poor surface roughness exhibited by AISI 436 ferritic stainless steel (FSS) during deep-drawing, Lankford values (Rmean and Δr), grain size, and microtextures of various sheet samples from this steel were studied. The chemical composition range for the samples was 0.013–0.017% C, 17–17.4% Cr, 0.9–1% Mo, and 0.4–0.5% Nb. The steels were subjected to various hot and cold rolling processing routes i.e. involving industrial direct rolling (DR) or intermediate annealing rolling (IR), and the drawability and final surface qualities of the steels were compared. It was found that the DR route gave an average R-mean and Δr value of 1.9 and -1.4 respectively, while the IR route yielded an average Rmean and Δr value of 1.6 and 0.52 respectively. The high Δr value for the DR processing route had a substantial adverse effect on the drawability. IR samples exhibited a smoother surface finish on visual inspection, while clear flow lines were visible on the DR samples, despite the fact that DR is the preferred industrial processing route due to the reduced production costs it offers. This observation was also confirmed through SEM examinations. The difference in the surface quality was attributed to microtexture. However, the mechanism responsible for this difference still needs to be identified.The authors gratefully acknowledge the financial contribution provided by the Advanced Metal Initiative (AMI) of the Department of Science and Technology (DST) through the Ferrous Metals Development Network (FMDN), and Columbus Stainless (Middelburg, South Africa).http://www.saimm.co.za/journal-papersam2016Materials Science and Metallurgical Engineerin

Acceptability of Condom Promotion and Distribution Among 10-19 Year-Old Adolescents in Mpwapwa and Mbeya Rural Districts, Tanzania.

\ud The HIV/AIDS pandemic remains a leading challenge for global health. Although condoms are acknowledged for their key role on preventing HIV transmission, low and inappropriate use of condoms persists in Tanzania and elsewhere in Africa. This study assesses factors affecting acceptability of condom promotion and distribution among adolescents in Mpwapwa and Mbeya rural districts of Tanzania. Data were collected in 2011 as part of a larger cross-sectional survey on condom use among 10-19 year-olds in Mpwapwa and Mbeya rural districts of Tanzania using a structured questionnaire. Associations between acceptability of condom promotion and distribution and each of the explanatory variables were tested using Chi Square. Multivariate logistic regression model was used to examine independent predictors of the acceptability of condom promotion and distribution using STATA (11) statistical software at 5% significance level. Mean age of the 1,327 adolescent participants (50.5% being males) was 13.5 years (SD = 1.4). Acceptance of condom promotion and distribution was found among 37% (35% in Mpwapwa and 39% in Mbeya rural) of the adolescents. Being sexually active and aged 15-19 was the strongest predictor of the acceptability of condom promotion and distribution (OR = 7.78, 95% CI 4.65-12.99). Others were; not agreeing that a condom is effective in preventing transmissions of STIs including HIV (OR = 0.34, 95% CI 0.20-0.56), being a resident of Mbeya rural district (OR = 1.67, 95% CI 1.28-2.19), feeling comfortable being seen by parents/guardians holding/buying condoms (OR = 2.20, 95% CI 1.40-3.46) and living with a guardian (OR = 1.48, 95% CI 1.08-2.04). Acceptability of condom promotion and distribution among adolescents in Mpwapwa and Mbeya rural is low. Effect of sexual activity on the acceptability of condom promotion and distribution is age-dependent and was the strongest. Feeling comfortable being seen by parents/guardians buying or holding condoms, perceived ability of condoms to offer protection against HIV/AIDS infections, district of residence and living arrangements also offered significant predictive effect. Knowledge of these factors is vital in designing successful and sustainable condom promotion and distribution programs in Tanzania.\u

Health care costs for the treatment of breast cancer recurrent events: estimates from a UK-based patient-level analysis

Cost pressures and the need to demonstrate cost-effectiveness of new interventions require consideration of the costs of treating disease. This study presents analyses of resource use data covering 199 postmenopausal women who experienced a breast cancer recurrent event between 1991 and 2004 and were treated at the Western General Hospital, Edinburgh. Aggregate (5-year) treatment costs for alternative recurrent events were estimated, as well as the annual costs incurred by patients experiencing contralateral, locoregional, or distant recurrence, who remained alive without further recurrence for a year. The 95% confidence intervals for the 5-year costs of recurrence ranged from £10 000 to £37 000 for locoregional recurrence, and £14 500–£20 000 for distant recurrence. No evidence of significant variations in these costs across time periods between 1991 and 2004 was identified. Annual costs for patients remaining in the same health state showed high initial costs for contralateral and locoregional recurrence, with low costs in subsequent years, while costs associated with distant recurrence declined at a slower rate and plateaued at 4–5 years post-diagnosis. The cost estimates presented in this paper not only inform the magnitude of the resource consequences of breast cancer recurrences, but they are also better suited to informing cost-effectiveness analyses, which have a far greater role in allocating health-care resources

Bacterial Distribution in the Rhizosphere of Wild Barley under Contrasting Microclimates

Background: All plants in nature harbor a diverse community of rhizosphere bacteria which can affect the plant growth. Our samples are isolated from the rhizosphere of wild barley Hordeum spontaneum at the Evolution Canyon (‘EC’), Israel. The bacteria which have been living in close relationship with the plant root under the stressful conditions over millennia are likely to have developed strategies to alleviate plant stress. Methodology/Principal Findings: We studied distribution of culturable bacteria in the rhizosphere of H. spontaneum and characterized the bacterial 1-aminocyclopropane-1-carboxylate deaminase (ACCd) production, biofilm production, phosphorus solubilization and halophilic behavior. We have shown that the H. spontaneum rhizosphere at the stressful South Facing Slope (SFS) harbors significantly higher population of ACCd producing biofilm forming phosphorus solubilizing osmotic stress tolerant bacteria. Conclusions/Significance: The long-lived natural laboratory ‘EC ’ facilitates the generation of theoretical testable and predictable models of biodiversity and genome evolution on the area of plant microbe interactions. It is likely that the bacteria isolated at the stressful SFS offer new opportunities for the biotechnological applications in our agro-ecologica

Interaction between a cationic surfactant-like peptide and lipid vesicles and its relationship to antimicrobial activity

We investigate the properties of an antimicrobial surfactant-like peptide (Ala)6(Arg), A6R, containing a cationic headgroup. The interaction of this peptide with zwitterionic (DPPC) lipid vesicles is investigated using a range of microscopic, X-ray scattering, spectroscopic, and calorimetric methods. The β-sheet structure adopted by A6R is disrupted in the presence of DPPC. A strong effect on the small-angle X-ray scattering profile is observed: the Bragg peaks from the DPPC bilayers in the vesicle walls are eliminated in the presence of A6R and only bilayer form factor peaks are observed. All of these observations point to the interaction of A6R with DPPC bilayers. These studies provide insight into interactions between a model cationic peptide and vesicles, relevant to understanding the action of antimicrobial peptides on lipid membranes. Notably, peptide A6R exhibits antimicrobial activity without membrane lysis

Enhanced Growth and Osteogenic Differentiation of Human Osteoblast-Like Cells on Boron-Doped Nanocrystalline Diamond Thin Films

Intrinsic nanocrystalline diamond (NCD) films have been proven to be promising substrates for the adhesion, growth and osteogenic differentiation of bone-derived cells. To understand the role of various degrees of doping (semiconducting to metallic-like), the NCD films were deposited on silicon substrates by a microwave plasma-enhanced CVD process and their boron doping was achieved by adding trimethylboron to the CH4:H2 gas mixture, the B∶C ratio was 133, 1000 and 6700 ppm. The room temperature electrical resistivity of the films decreased from >10 MΩ (undoped films) to 55 kΩ, 0.6 kΩ, and 0.3 kΩ (doped films with 133, 1000 and 6700 ppm of B, respectively). The increase in the number of human osteoblast-like MG 63 cells in 7-day-old cultures on NCD films was most apparent on the NCD films doped with 133 and 1000 ppm of B (153,000±14,000 and 152,000±10,000 cells/cm2, respectively, compared to 113,000±10,000 cells/cm2 on undoped NCD films). As measured by ELISA per mg of total protein, the cells on NCD with 133 and 1000 ppm of B also contained the highest concentrations of collagen I and alkaline phosphatase, respectively. On the NCD films with 6700 ppm of B, the cells contained the highest concentration of focal adhesion protein vinculin, and the highest amount of collagen I was adsorbed. The concentration of osteocalcin also increased with increasing level of B doping. The cell viability on all tested NCD films was almost 100%. Measurements of the concentration of ICAM-1, i.e. an immunoglobuline adhesion molecule binding inflammatory cells, suggested that the cells on the NCD films did not undergo significant immune activation. Thus, the potential of NCD films for bone tissue regeneration can be further enhanced and tailored by B doping and that B doping up to metallic-like levels is not detrimental for cells