Poly[di-μ-glycinato-copper(II)]: a two-dimensional coordination polymer

The title coordination polymer, [Cu(C2H4NO2)2]n, is two-dimensional and consists of a distorted octa­hedral copper coordination polyhedron with two bidentate glycine ligands chelating the metal through the O and N atoms in a trans-square-planar configuration. The two axial coordination sites are occupied by carbonyl O atoms of neighbouring glycine mol­ecules. The Cu—O distances for the axial O atoms [2.648 (2) and 2.837 (2) Å] are considerably longer than both the Cu—O [1.9475 (17) and 1.9483 (18) Å] and Cu—N [1.988 (2) and 1.948 (2) Å] distances in the equatorial plane, which indicates a strong Jahn–Teller effect. In the crystal, the two-dimensional networks are arranged parallel to (001) and are linked via N—H⋯O hydrogen bonds, forming a three-dimensional arrangement

Investigating pitting in X65 carbon steel using potentiostatic polarisation

Although pitting corrosion in passive materials is generally well understood, the growth of surface pits in actively-corroding materials has received much less attention to date and remains poorly understood. One of the key challenges which exists is repeatedly and reliably generating surface pits in a practical time-frame in the absence of deformation and/or residual stress so that studies on pit propagation and healing can be performed. Another pertinent issue is how to evaluate pitting while addressing general corrosion in low carbon steel. In this work, potentiostatic polarisation was employed to induce corrosion pits (free from deformation or residual stress) on actively corroding X65 carbon steel. The influence of applied potential (50 mV, 100 mV and 150 mV vs open circuit potential) was investigated over 24 h in a CO2-saturated, 3.5 wt.% NaCl solution at 30 °C and pH 3.8. Scanning electron microscopy (SEM) was utilised to examine pits, while surface profilometry was conducted to measure pit depth as a function of applied potential over the range considered. Analyses of light pitting (up to 120 μm) revealed that pit depth increased linearly with increase in applied potential. This paper relates total pit volume (measured using white light interferometry) to dissipated charge or total mass loss (using the current response for potentiostatic polarisation in conjunction with Faraday's law). By controlling the potential of the surface (anodic) the extent of pitting and general corrosion could be controlled. This allowed pits to be evaluated for their ability to continue to propagate after the potentiostatic technique was employed. Linear growth from a depth of 70 μm at pH 3.8, 80 °C was demonstrated. The technique offers promise for the study of inhibition of pitting

Treated Rhizophora mucronata tannin as a corrosion inhibitor in chloride solution

Treated Rhizopora mucronata tannin (RMT) as a corrosion inhibitor for carbon steel and copper in oil and gas facilities was investigated. Corrosion rate of carbon-steel and copper in 3wt% NaCl solution by RMT was studied using chemical (weight loss method) and spectroscopic (FTIR) techniques at various temperatures in the ranges of 26–90C. The weight loss data was compared to the electrochemical by the application of Faraday’s law for the conversion of corrosion rate data from one system to another. The inhibitive efficiency of RMT was compared with commercial inhibitor sodium benzotriazole (BTA-S). The best concentration of RMT was 20% (w/v), increase in concentration of RMT decreased the corrosion rate and increased the inhibitive efficiency. Increase in temperature increased the corrosion rate and decreased the inhibitive efficiency but, the rate of corrosion was mild with RMT. The FTIR result shows the presence of hydroxyl group, aromatic group, esters and the substituted benzene group indicating the purity of the tannin. The trend of RMT was similar to that of BTA-S, but its inhibitive efficiency for carbon-steel was poor (6%) compared to RMT (59%). BTA-S was efficient for copper (76%) compared to RMT (74%) at 40% (w/v) and 20% (w/v) concentration respectively. RMT was efficient even at low concentration therefore, the use of RMT as a cost effective and environmentally friendly corrosion inhibiting agent for carbon steel and copper is herein proposed

Investigation of corrosion inhibitor persistency using electrochemical quartz crystal nanobalance

This paper presents an electrochemical quartz crystal nanobalance (EQCN) and scanning electron microscopy study conducted to better understand the inhibitor film formation and destruction processes in pipelines. The kinetics of the inhibitor film formation and destruction processes were investigated through the laboratory-scale EQCN experiments. The results of this study demonstrate that the EQCN is a promising alternative to the macroscale methods that have been commonly used to study inhibitor persistency. Scanning electron microscopy results show that corrosion of specimens protected with an inhibitor film was due to pitting corrosion mostly concentrated around the flow cell inlet. Specimens on which a protective inhibitor film did not develop exhibited uniform corrosion. Energy-dispersive X-ray spectroscopy results show that chlorine accumulation only occurs inside the pits

Inhibitor Selection for Internal Corrosion Control of Pipelines

ddition of inhibitors can provide a cost-effective method for controlling internal corrosion of pipelines. To select appropriate inhibitors and their concentrations, several laboratory experiments are usually performed. Test methodologies to evaluate inhibitors for a particular field should be carried out to simulate the conditions in the pipeline. Because several interacting parameters influence corrosion, and hence inhibitor performance, simulation of field operating conditions in the laboratory is often difficult. In this paper, user-friendly software to optimize the laboratory experimental conditions to simulate field operating conditions is discussed. The merits of the program in selecting commercial inhibitors and in designing cost-effective inhibitors for future application are described.Copyright © 1998 by Minister of Natural Resources Cana