Postcritical Behavior of Cables Undergoing Two Simultaneous Galloping Modes

A nonlinear two degree-of-freedom model, describing a flexible elastic suspended cable undergoing galloping oscillations, is analyzed. By using a perturbative approach, the critical conditions occuring for different values of the aerodynamic coefficients are described. Two different type of critical conditions, corresponding to simple or double Hopf bifurcations are found. The nonlinear postcritical behavior of single taut strings in 1:1 primary internal resonance is studied through the multiple scale perturbation method. In the double Hopf bifurcation case the influence of the detuning between the critical eigenvalues on the postcritical behavior is illustrated. It is found that quasi-periodic motions, which are likely to occur in the linear field when the two critical frequencies are incommensurable, are really unstable in the nonlinear range. Therefore, the postcritical behavior of the string consists of stable periodic motions for any detuning values

A Preliminary Look at the Physics Reach of a Solar Neutrino TPC: Time-Independent Two Neutrino Oscillations

This paper will discuss the physics reach of a solar neutrino TPC containing many tons of He4 under high pressure. Particular attention is given to the LMA and SMA solutions, which are allowed by current data, and which are characterized by a lack of time-dependent phenomena (either summer-winter or day-night asymmetries). In this case, the physics of neutrino masses and mixing is all contained in the energy dependence of the electron neutrino survival probability, (or in its reciprocal, the electron neutrino disappearance probability).Comment: 19 pages, 12 figure

Information-centric networking for machine-to-machine data delivery: A case study in smart grid applications

Largely motivated by the proliferation of content-centric applications in the Internet, information-centric networking has attracted the attention of the research community. By tailoring network operations around named information objects instead of end hosts, ICN yields a series of desirable features such as the spatiotemporal decoupling of communicating entities and the support of in-network caching. In this article, we advocate the introduction of such ICN features in a new, rapidly transforming communication domain: the smart grid. With the rapid introduction of multiple new actors, such as distributed (renewable) energy resources and electric vehicles, smart grids present a new networking landscape where a diverse set of multi-party machine-to-machine applications are required to enhance the observability of the power grid, often in real time and on top of a diverse set of communication infrastructures. Presenting a generic architectural framework, we show how ICN can address the emerging smart grid communication challenges. Based on real power grid topologies from a power distribution network in the Netherlands, we further employ simulations to both demonstrate the feasibility of an ICN solution for the support of real-time smart grid applications and further quantify the performance benefits brought by ICN against the current host-centric paradigm. Specifically, we show how ICN can support real-time state estimation in the medium voltage power grid, where high volumes of synchrophasor measurement data from distributed vantage points must be delivered within a very stringent end-to-end delay constraint, while swiftly overcoming potential power grid component failures. © 1986-2012 IEEE

Influence of Modeling Liquids and Universal Adhesives Used as Lubricants on Color Stability and Translucency of Resin-Based Composites

The use of lubricants during restorative procedures is a clinically common practice to alleviate the stickiness of resin-based composite (RBCs) materials and to improve its handling. This study evaluated the effects of three modeling liquids (ML) and one universal adhesive (UA) used as lubricants during composite layering on the color stability and translucency of RBCs. Methods. The following materials were applied between every 1 mm RBC layer (total restoration height of 4 mm): GC modeling liquid (GCML, GC Corporation, Tokyo, Japan), composite wetting resin (UPWR, Ultradent Products, South Jordan, UT, USA), Bisco modeling resin (BSMR, Bisco Inc., Schaumburg, IL, USA) as an ML and Clearfil Universal Bond Quick (KUBQ, Kuraray Noritake Dental, Tokyo, Japan) as a UA. Lubricant-free specimens were used as the control. Color coordinates (L*, a* and b*) were recorded at baseline and after a simulation of 1 month of coffee consumption. Data were analyzed using ANOVA and a post hoc Tukey test (p < 0.05). Results. All lubricants induced a color change higher than the perceptibility threshold (ΔE00 > 0.81). GCML showed the highest color stability. The use of KUBQ resulted in significantly higher a* values (p = 0.001) at baseline and after staining. KUBQ and UPWR significantly influenced the color stability (ΔE00, p = 0.0001) after staining, overcoming the clinical acceptability threshold (ΔE00 > 1.77). Conclusions. The use of lubricants may affect color stability at baseline and after simulation of staining. Translucency was not affected at baseline nor after staining. Clinical Significance. Clinicians should be aware that some lubricants may affect color stability, even at baseline

Nutritional and sensorial meat quality of different selected Japanese quails (Coturnix coturnix japonica)

AbstractDescendents of S18 generation of Japanese quails (Coturnix coturnix japonica), selected for low (line 11, n=15) or high (line 12, n=6) yolk cholesterol content, egg type (line 13, n=15), and meat type (line 8, n=15) chosen as unselected control, were used for this experiment to study performance as well as nutritional and sensorial meat quality. The lowering of yolk cholesterol content in the line 11 was 313 mg/100 g yolk, and the increasing of yolk cholesterol content in the line 12 was 116 mg/100 g yolk, i.e. -17.25 %, and +6.39% in comparison to parental line 13, respectively. Quail-chicks were grown in a deep litter floor up to 35 days of age, under continuous lighting, with water and feed (a commercial diet) ad libitum until 12h before slaughtering, when feed was withdrawn. The body weight of the quails was controlled every week (from week 1 to 5). At the end of the experiment, all the birds were slaughtered (at avg. weight of 209.3a vs 104.0b, 107.7b and 110.6b g for lines 8, 11, 12 and 13, ..

External gap progression after cyclic fatigue of adhesive overlays and crowns made with high translucency zirconia or lithium silicate

Objectives: To evaluate three-dimensional external gap progression after chewing simulation of high translucency zirconia (HTZ) and zirconia-reinforced lithium silicate (ZLS) applied on endodontically treated teeth with different preparation designs. Materials and Method: Endodontically treated molars were prepared with low-retentive (adhesive overlay) and high-retentive (full crown) designs above cementum-enamel junction and restored with HTZ and ZLS. Micro-computed tomography analysis was assessed before and after chewing simulation to evaluate three-dimensionally the external gap progression. Results were statistically analyzed with two-way ANOVA and post-hoc Tukey test. Results: High-retentive preparation design had a significantly inferior gap progression compared to the overlay preparation (p < 0.01); ZLS exhibited a significant inferior gap progression compared to HTZ (p < 0.01). Conclusions: High-retentive preparations restored with ZLS seem to better perform in maintaining the sealing of the external margin after cyclic fatigue. Clinical significance: The clinician should pay attention to the proper combination of preparation designs and ceramic material selection for an endodontically treated molar restoration. HTZ seems to perform worse than lithium silicate in terms of marginal sealing, still showing lacks in resistance to cyclic fatigue when adhesive preparations are performed

Infrared absorption from Charge Density Waves in magnetic manganites

The infrared absorption of charge density waves coupled to a magnetic background is first observed in two manganites La{1-x}Ca{x}MnO{3} with x = 0.5 and x = 0.67. In both cases a BCS-like gap 2 Delta (T), which for x=0.5 follows the hysteretic ferro-antiferromagnetic transition, fully opens at a finite T{0} < T{Neel}, with 2 Delta(T{0})/kT{c} close to 5. These results may also explain the unusual coexistence of charge ordering and ferromagnetism in La{0.5}Ca{0.5}MnO{3}.Comment: File revtex + 3 figs. in epsf. To appear on Phys. Rev. Let