20,560 research outputs found
Deployable antenna reflector
The first phase in the development of a solid surface, deployable, antenna reflector is outlined and discussed. The deployment concept is described in conjunction with illustrations and photos of the fabricated reflector models. Details and results of the thermal distortion analysis are presented. Results indicate that the discussed reflector concept is an effective approach in satisfying the requirements for large deployable antennas in the 6 GHz to 100 GHz frequency regime
Antenna Technology for QUASAT application
A hybrid growth version of the advanced Sunflower, or precision deployable, antenna was adopted as the configuration proposed for the QUASAT very long baseline interferometry mission. The antenna consists of rigid panels of graphite-epoxy facesheets covering aluminum honeycomb sandwich. The six main folding panels are hinged to a cantilevered support ring attached to the periphery of the center section. Six pairs of intermediate panels are located between these panels and are hinged to each other and to the main panels. The flight configuration, antenna weight, a mass properties, frequency, and contour tolerance are discussed. The advantages of the solid antenna surface cover an all-mesh contour are examined
Solid state microelectronics tolerant to radiation and high temperature
The 300 C electronics technology based on JFET thick film hybrids was tested up to 10 to the 9th power rad gamma (Si) and 10 to the 15th power neutrons/sq cm. Circuits and individual components from this technology all survived this total dose although some devices required 1 hour of annealing at 200 or 300 C to regain functionality. This technology used with real time annealing should function to levels greater than 10 to the 10th power rad gamma and 10 to the 16th power n/sq cm
VLA observations of 6-cm excited OH
The VLA was used to determine precise positions for 4765-MHz OH maser
emission sources toward star-forming regions which had been observed about
seven months earlier with the Effelsberg 100-meter telescope. The observations
were successful for K3-50, DR21EX, W75N, and W49A. No line was detected toward
S255: this line had decreased to less than 5 per cent of the flux density
observed only seven months earlier. The time-variability of the observed
features during the past 30 years is summarised. In addition, to compare with
the Effelsberg observations, the 4750-MHz and 4660-MHz lines were observed in
W49A. These lines were found to originate primarily from an extended region
which is distinguished as an exceptional collection of compact continuum
components as well as by being the dynamical centre of the very powerful H_2 O
outflow.Comment: 11 pages, will require MN style file to process. MNRAS, accepted Oct
15, 200
Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes
Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given
Rotational and vibrational effects in ion- dipole collisions
Rotational and vibration effects in ion dipole collisions demonstrated in color motion pictur
Ab Initio Liquid Hydrogen Muon Cooling Simulations with ELMS in ICOOL
This paper presents new theoretical results on the passage of muons through
liquid hydrogen which have been confirmed in a recent experiment. These are
used to demonstrate that muon bunches may be compressed by ionisation cooling
more effectively than suggested by previous calculations.
Muon cooling depends on the differential cross section for energy loss and
scattering of muons. We have calculated this cross section for liquid H2 from
first principles and atomic data, avoiding traditional assumptions. Thence, 2-D
probability maps of energy loss and scattering in mm-scale thicknesses are
derived by folding, and stored in a database. Large first-order correlations
between energy loss and scattering are found for H2, which are absent in other
simulations. This code is named ELMS, Energy Loss & Multiple Scattering. Single
particle trajectories may then be tracked by Monte Carlo sampling from this
database on a scale of 1 mm or less. This processor has been inserted into the
cooling code ICOOL. Significant improvements in 6-D muon cooling are predicted
compared with previous predictions based on GEANT. This is examined in various
geometries. The large correlation effect is found to have only a small effect
on cooling. The experimental scattering observed for liquid H2 in the MUSCAT
experiment has recently been reported to be in good agreement with the ELMS
prediction, but in poor agreement with GEANT simulation.Comment: 6 pages, 3 figure
Proposal for an IMLS Collection Registry and Metadata Repository
The University of Illinois at Urbana-Champaign proposes to design, implement, and research a collection-level registry and item-level metadata repository service that will aggregate information about digital collections and items of digital content created using funds from Institute of Museum and Library Services (IMLS) National Leadership Grants. This work will be a collaboration by the University Library and the Graduate School of Library and Information Science. All extant digital collections initiated or augmented under IMLS aegis from 1998 through September 30, 2005 will be included in the proposed collection registry. Item-level metadata will be harvested from collections making such content available using the Open Archives Initiative Protocol for Metadata Harvesting (OAI PMH). As part of this work, project personnel, in cooperation with IMLS staff and grantees, will define and document appropriate metadata schemas, help create and maintain collection-level metadata records, assist in implementing OAI compliant metadata provider services for dissemination of item-level metadata records, and research potential benefits and issues associated with these activities. The immediate outcomes of this work will be the practical demonstration of technologies that have the potential to enhance the visibility of IMLS funded online exhibits and digital library collections and improve discoverability of items contained in these resources. Experience gained and research conducted during this project will make clearer both the costs and the potential benefits associated with such services. Metadata provider and harvesting service implementations will be appropriately instrumented (e.g., customized anonymous transaction logs, online questionnaires for targeted user groups, performance monitors). At the conclusion of this project we will submit a final report that discusses tasks performed and lessons learned, presents business plans for sustaining registry and repository services, enumerates and summarizes potential benefits of these services, and makes recommendations regarding future implementations of these and related intermediary and end user interoperability services by IMLS projects.unpublishednot peer reviewe
Effect of Varying Dietary Selenium Levels on Tissue Composition, Blood Composition and Performance of Growing Swine Fed Seleniferous Grains
It is established that selenium is an essential micronutrient as well as a natural toxicant for domestic livestock. However, reports of selenium toxicosis in swine are limited and not well documented. The level at which selenium becomes toxic to swine is thought to be about 8 ppm. This value was derived from the initial selenium research of the 1930\u27s, with considerable extrapolation from other species used in this determination. Since that time, diet composition has become much more complex, nutrient level of diets has increased and feed additives are commonly used. It is not known what effect these factors or other nutritional interrelationships may have on the level at which selenium becomes toxic. Due to the variability of selenium content in feedstuffs and because selenium is now approved as a feed additive, it is important to better define the level at which selenium becomes toxic to swine. This research was conducted to determine the effect of varying dietary selenium levels on tissue and blood composition and performance of growing swine fed seleniferous grains
Study of advanced sunflower precision deployable antenna
The maximum deployed diameter stowable in shuttle was determined for the original concept and for new more efficient concepts. Estimates of weight, surface accuracy and cost were made for the various configurations. Five critical technologies were identified which would be required to manufacture large solid deployable reflectors. These technologies are concerned with surface accuracy improvement and verification
- …