38 research outputs found
Recommended from our members
Non-additive sputtering of niobium and tantalum as large neutral and ion clusters.
An analysis of available literature data on both the positive ion emission from Nb and Ta bombarded by 6 keV/atom Au{sub m}{sup -} atomic and molecular ions (m=1, 2, 3) and positive ionization probabilities of Nb{sub n} and Ta{sub n} neutral clusters sputtered from the same metals by 5 keV Ar{sup +} ions have been conducted. Dependencies of cluster yields Y{sub n,m} (regardless of a charge state) on number of atoms n in a sputtered particle were found to follow a power law as Y{sub n,m} {approx} n{sup -{sigma}{sub m}} where {sigma}{sub m} decreased with an increase of m. A non-linear enhancement of yields for large Nb{sub n}{sup +} and Ta{sub n}{sup +} cluster ions (n>4) appeared to be due to a non-additive process of sputtering rather than because of a non-additive process of their ionization. A manifestation of the non-additive sputtering in kinetic energy distributions of secondary ions found to be different for atomic and cluster ions
Simultaneous microbeam IBA and beam-induced luminescence analysis of strained doped silica fibre radiation dosimeters
We demonstrate that the simultaneous combination of ion beam analysis (IBA) and ion beam induced luminescence (IL) can reveal valuable information concerning the performance of strained doped silica fibre thermoluminescence microdosimeters. The micron scale spatial resolution and low detection limits of IBA allow the lateral distribution of dopant elements to be mapped and then correlated with the distribution of prompt radioluminescence. Measurement of the decay of the IL signal with dose provide information concerning the saturation of the subsequent TL signal at high doses. MeV ion beams can deposit relatively high energy in localized, well-quantified small volumes and so this method is valuable for studying high dose effects in TL dosimeters. We describe a simple modification of the target chamber microscope which enables sensitive low background light detection in two wavelength bands and present preliminary results from three types of germanium doped silica fibre dosimeter
Sampling and Analysis of Impact Crater Residues Found on the Wide Field Planetary Camera-2 Radiator
After nearly 16 years in low Earth orbit (LEO), the Wide Field Planetary Camera-2 (WFPC2) was recovered from the Hubble Space Telescope (HST) in May 2009, during the 12 day shuttle mission designated STS-125. The WFPC-2 radiator had been struck by approximately 700 impactors producing crater features 300 microns and larger in size. Following optical inspection in 2009, agreement was reached for joint NASA-ESA study of crater residues, in 2011. Over 480 impact features were extracted at NASA Johnson Space Center's (JSC) Space Exposed Hardware clean-room and curation facility during 2012, and were shared between NASA and ESA. We describe analyses conducted using scanning electron microscopy (SEM) - energy dispersive X-ray spectrometry (EDX): by NASA at JSC's Astromaterials Research and Exploration Science (ARES) Division; and for ESA at the Natural History Museum (NHM), with Ion beam analysis (IBA) using a scanned proton microbeam at the University of Surrey Ion Beam Centre (IBC)
Micrometeoroid Impacts on the Hubble Sace Telescope Wide Field and Planetary Camera 2: Ion Beam Analysis of Subtle Impactor Traces
Recognition of origin for particles responsible for impact damage on spacecraft such as the Hubble Space Telescope (HST) relies upon postflight analysis of returned materials. A unique opportunity arose in 2009 with collection of the Wide Field and Planetary Camera 2 (WFPC2) from HST by shuttle mission STS-125. A preliminary optical survey confirmed that there were hundreds of impact features on the radiator surface. Following extensive discussion between NASA, ESA, NHM and IBC, a collaborative research program was initiated, employing scanning electron microscopy (SEM) and ion beam analysis (IBA) to determine the nature of the impacting grains. Even though some WFPC2 impact features are large, and easily seen without the use of a microscope, impactor remnants may be hard to find
Impacts on the Hubble Space Telescope Wide Field and Planetary Camera 2: Microanalysis and Recognition of Micrometeoroid Compositions
Postflight surveys of the Wide Field and Planetary Camera 2 (WFPC2) on the Hubble Space Telescope have located hundreds of features on the 2.2 by 0.8 m curved plate, evidence of hypervelocity impact by small particles during 16 years of exposure to space in low Earth orbit (LEO). The radiator has a 100 - 200 micron surface layer of white paint, overlying 4 mm thick Al alloy, which was not fully penetrated by any impact. Over 460 WFPC2 samples were extracted by coring at JSC. About half were sent to NHM in a collaborative program with NASA, ESA and IBC. The structural and compositional heterogeneity at micrometer scale required microanalysis by electron and ion beam microscopes to determine the nature of the impactors (artificial orbital debris, or natural micrometeoroids, MM). Examples of MM impacts are described elsewhere. Here we describe the development of novel electron beam analysis protocols, required to recognize the subtle traces of MM residues
Hypervelocity impact in low earth orbit: finding subtle impactor signatures on the Hubble Space Telescope
Return of materials from the Hubble Space Telescope (HST) during shuttle orbiter service missions has allowed inspection of large numbers of hypervelocity impact features from long exposure at about 615 km altitude in low Earth orbit (LEO) [1,2]. Here we describe the application of advanced X-ray microanalysis techniques on scanning electron microscopes (SEM), microprobes and a 2 MV Tandetron, to nearly 400 impacts on the painted metal surface of the Wide Field and Planetary Camera 2 (WFPC2) radiator shield [3,4]. We identified artificial Orbital Debris (OD) and natural Micrometeoroid (MM) origins for small [5] and even for larger particles [6], which usually may leave little or no detectable trace on HST solar arrays, as they penetrate through the full cell thickness [2,7]
Micrometeoroid Impacts on the Hubble Space Telescope Wide Field and Planetary Camera 2: Smaller Particle Impacts
The radiator shield on the Wide Field and Planetary Camera 2 (WFPC2) was subject to optical inspection following return from the Hubble Space Telescope (HST) in 2009. The survey revealed over 600 impact features of > 300 micrometers diameter, from exposure in space for 16 years. Subsequently, an international collaborative programme of analysis was organized to determine the origin of hypervelocity particles responsible for the damage. Here we describe examples of the numerous smaller micrometeoroid (MM) impact features (< 700 micrometers diameter) which excavated zinc orthotitanate (ZOT) paint from the radiator surface, but did not incorporate material from underlying Al alloy; larger impacts are described by [3]. We discuss recognition and interpretation of impactor remains, and MM compositions found on WFPC2