Alignment in total knee arthroplasty : what’s in a name?

Dissatisfaction following total knee arthroplasty is a well-documented phenomenon. Although many factors have been implicated, including modifiable and nonmodifiable patient factors, emphasis over the past decade has been on implant alignment and stability as both a cause of, and a solution to, this problem. Several alignment targets have evolved with a proliferation of techniques following the introduction of computer and robotic-assisted surgery. Mechanical alignment targets may achieve mechanically-sound alignment while ignoring the soft tissue envelope; kinematic alignment respects the soft tissue envelope while ignoring the mechanical environment. Functional alignment is proposed as a hybrid technique to allow mechanically-sound, soft tissue-friendly alignment targets to be identified and achieved

Developing Student-Faculty Partnerships at Bridgewater State University

The introduction frames the essays included in this issue as developing student-faculty partnerships with a range of collaborative relationships. The first three essays explore partnerships that are program-based partnerships. The next four essays explore various kinds of student-faculty partnerships that unfold within classroom-focused experiences. In the final section, three essays that focus on partnerships beyond the boundaries of the classroom and the campus are shared. All ten essays contribute to chronicling multiple versions of the development of student-faculty partnerships at Bridgewater State University

Students as Partners with Faculty in a Teacher Education Program

The authors share their experiences of working with student partners within a Physical Education Teacher Education Program. Through partnership they more deeply understand how their role as professor was a barrier to open and honest student-faculty communication

Development and mechanical testing of a short intramedullary nail for fixation of femoral rotational osteotomy in cerebral palsy patients

<p>Abstract</p> <p>Background</p> <p>Rotational osteotomy is frequently indicated to correct excessive femoral anteversion in cerebral palsy patients. Angled blade plate is the standard fixation device used when performed in the proximal femur, but extensile exposure is required for plate accommodation. The authors developed a short locked intramedullary nail to be applied percutaneously in the fixation of femoral rotational osteotomies in children with cerebral palsy and evaluated its mechanical properties.</p> <p>Methods</p> <p>The study was divided into three stages. In the first part, a prototype was designed and made based on radiographic measurements of the femoral medullary canal of ten-year-old patients. In the second, synthetic femoral models based on rapid-prototyping of 3D reconstructed images of patients with cerebral palsy were obtained and were employed to adjust the nail prototype to the morphological changes observed in this disease. In the third, rotational osteotomies were simulated using synthetic femoral models stabilized by the nail and by the AO-ASIF fixed-angle blade plate. Mechanical testing was done comparing both devices in bending-compression and torsion.</p> <p>Results</p> <p>The authors observed proper adaptation of the nail to normal and morphologically altered femoral models, and during the simulated osteotomies. Stiffness in bending-compression was significantly higher in the group fixed by the plate (388.97 ± 57.25 N/mm) than in that fixed by the nail (268.26 ± 38.51 N/mm) as torsional relative stiffness was significantly higher in the group fixed by the plate (1.07 ± 0.36 Nm/°) than by the nail (0.35 ± 0.13 Nm/°).</p> <p>Conclusions</p> <p>Although the device presented adequate design and dimension to fit into the pediatric femur, mechanical tests indicated that the nail was less stable than the blade plate in bending-compression and torsion. This may be a beneficial property, and it can be attributed to the more flexible fixation found in intramedullary devices.</p

Sistema de medição de fluxo de cana-de-açucar em colhedoras para a geração de mapas de produtividade

Orientador : Paulo Sergio Graziano MagalhãesTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia AgricolaDoutorad

T-Bar clasp-retained removable partial denture as an alternative to implant-based prosthetic treatment

This article reports the case of a 55-year-old female patient who presented with unsatisfactory temporary crowns in the right mandibular premolars and molars, and a premolar-to-molar fixed partial denture in the left side. The clinical and radiographic examinations revealed a fracture of the left first premolar that was a retainer of the fixed partial denture and required extraction. Initially, the acrylic resin crowns were replaced by new ones, and a provisional RPD was made using acrylic resin and orthodontic wire clasps to resolve the problem arising from the loss of the fixed partial denture. Considering the patient's high esthetic demands, the treatment options for the definitive prosthetic treatment were discussed with her and rehabilitation with implant-supported dentures was proposed because the clinical conditions of the residual alveolar ridge were suitable for implant installation, and the patient's general health was excellent. However, the patient did not agree because she knew of a failed case of implant-retained denture in a diabetic individual and was concerned. The patient was fully informed that implant installation was the best indication for her case, but the arguments were not sufficient to change her decision. The treatment possibilities were presented and the patient opted for a clasp-retained removable partial denture (RPD) associated with the placement of crowns in the pillar teeth. The temporary RPD was replaced by the definitive RPD constructed subsequently. Although RPD was not the first choice, satisfactory esthetic and functional outcomes were achieved, overcaming the patient's expectations. This case report illustrates that the dentist must be prepared to deal with situations where, for reasons that cannot be managed, the patient does not accept the treatment considered as the most indicated for his/her case. Alternatives must be proposed and the functional and esthetic requirements must be fulfilled in the best possible manner.Este artigo relata o caso de uma paciente de 55 anos que apresentava no arco mandibular coroas provisórias insatisfatórias nos pré-molares do lado direito e uma prótese parcial fixa de molar a pré-molar no lado esquerdo. Os exames clínico e radiográfico revelaram uma fratura do primeiro pré-molar esquerdo que era um retentor da prótese parcial fixa e teve a extração indicada. Inicialmente, as coroas provisórias foram substituídas por novas e uma prótese parcial removível provisória foi confeccionada com resina acrílica e grampos de fio ortodôntico a fim resolver os problemas relacionados à perda da prótese parcial fixa. Considerando a forte demanda estética da paciente, foram discutidas as opções de tratamento protético definitivo. Foi proposta a reabilitação com prótese implanto-suportada uma vez que as condições clínicas do rebordo alveolar se apresentavam adequadas para instalação de implantes e a saúde geral da paciente era excelente. Entretanto, a paciente não concordou com o tratamento proposto, alegando saber de um caso clínico em que houve insucesso na reabilitação por prótese implanto-suportada em um paciente diabético. Ela foi inteiramente informada de que a colocação de implantes era a melhor indicação para seu caso, mas os argumentos não foram suficientes para mudar sua decisão. As possibilidades de tratamento foram apresentadas e a paciente optou por uma prótese parcial removível (PPR) retida a grampos associada com coroas nos dentes pilares. Na seqüência, a PPR provisória foi substituída por uma PPR definitiva. Embora a PPR não tivesse sido a primeira escolha, foram obtidos resultados estéticos e funcionais satisfatórios, superando as expectativas da paciente. Este relato de caso ilustra que o dentista deve estar preparado para enfrentar situações em que, por razões que não possam ser administradas, o paciente não aceite o tratamento considerado mais indicado para seu caso. Alternativas devem ser propostas e as exigências estéticas e funcionais devem ser contempladas da melhor maneira possível

Design of a normally-off diamond JFET for high power integrated applications

© 2017 Elsevier B.V. Normally-on (depletion mode) and normally-off (enhancement mode) diamond Junction Field Effect Transistors (JFETs) have been analyzed by means of a commercially available TCAD software. First, the parameters used for describing the incomplete ionization, avalanche, and mobility models in diamond have been discussed and assessed against the state-of-the-art. The on- and off-state electrical characteristics of diamond JFETs have been simulated with the suggested parameter values and matched with a set of available experimental data. Secondly, an optimization technique which can improve the performance of an enhancement mode diamond JFET that operates in the unipolar conduction regime has been proposed. This method takes into account the unique properties and limitations of diamond and highlights the main issues that can arise from the design of a normally-off diamond JFET. In particular, the crucial effect of the high temperature on the performance of the normally-off JFET has been investigated. The adopted technique is mainly based on a design of TCAD experiments and no mathematical algorithms have been developed for the calculation of the optimized set of parameters

Chronic Myeloid Leukemia: causes of treatment failure with imatinib

Imatinib is currently the treatment of choice of CML, but despite of the excellent results, it is not able to completely eradicate the disease and resistance may occur. The most studied mechanism is the presence of ABL kinase mutations that interfere with imatinib binding and action, gene amplification and clonal evolution. However, there are other mechanisms involved and less studied such as drug absorption and influx and efflux of imatinib. Besides the true causes of resistance, compliance is always a concern and also drug interaction should be checked. An understanding of these mechanisms will certainly contribute to develop new strategies for the treatment of resistant cases.O mesilato de imatinibe (MI) é atualmente o tratamento de escolha da Leucemoa Mielóide Crônica (LMC), mas, apesar dos excelentes resultados, não é capaz de erradicar completamente a doença, podendo ocorrer resistência ao tratamento. O mecanismo mais conhecido de resistência é o desenvolvimento de mutações do BCR-ABL, que impedem a ação ligação adequada do imatinibe à quinase, além de amplificação gênica e evolução clonal. No entanto, há uma série de outros mecanismos envolvidos e ainda pouco estudados, como alterações na absorção, efluxo e influxo de droga para o interior das células. Devem-se também considerar outros fatores, como aderência ao tratamento e uso de medicamentos concomitantes que podem interferir com imatinibe, diminuindo sua ação. O entendimento desses mecanismos poderá contribuir no desenvolvimento de novas estratégias para o tratamento dos casos resistentes.222