1,749 research outputs found
Recommended from our members
At the bathhouse: Municipal reform and the bathing commons in late imperial St. Petersburg
This paper seeks to explore a variant model of hygienic modernity exemplified by late imperial Russia. It describes commercial bathhouses in St. Petersburg as a kind of urban ‘quasi-commons’, and examines the interplay between their cultures and practices and attempts by the city government to subject them to scientifically and technologically progressive regulation. This interplay reveals a social and political order that contrasts sharply with the ‘liberal’ form of governmentality at work in the bathhouse movement in the West. The failed implementation of the Petersburg Bathhouse Ordinance of 1879 is emblematic of the city government's systematic attempt to secure public health and shape citizens through the regulation of bathing institutions. In contrast to the West, however, commercial bathhouses in imperial St. Petersburg were well-established institutions, rooted in a rural tradition of common bathing, whose provision of ‘livelihood qualities’ extended well beyond bathing and ablution. Furthermore, the city government's autocratic approach to funding reforms and its paternalistic view of bathhouse visitors contrasted with the municipal bathhouse movement in Victorian England, for example. Over almost four decades of negotiated non-compliance, amendments to legislation, unsuccessful petitions, and subtle adaptations by owners and attendants, commercial bathhouses retained their place in the city. The drive to extend governmentality to the city's commercial bathhouses was ultimately abortive, as legislation passed to launch reforms failed to elicit the support of the stakeholders whose cooperation would have been essential for its implementation. The renegotiation under legislative pressure of the terms of cooperation among urban bathing's stakeholders thus belies the supposedly general trend in bathing from the communal to the private or municipal during the period
Functional Differences between Periportal and Perivenous Kupffer Cells Isolated by Digitonin-Collagenase Perfusion
Circadian Organization in Hemimetabolous Insects
The circadian system of hemimetabolous insects is reviewed in respect to the locus of the circadian clock and multioscillatory organization. Because of relatively easy access to the nervous system, the neuronal organization of the clock system in hemimetabolous insects has been studied, yielding identification of the compound eye as the major photoreceptor for entrainment and the optic lobe for the circadian clock locus. The clock site within the optic lobe is inconsistent among reported species; in cockroaches the lobula was previously thought to be a most likely clock locus but accessory medulla is recently stressed to be a clock center, while more distal part of the optic lobe including the lamina and the outer medulla area for the cricket. Identification of the clock cells needs further critical studies. Although each optic lobe clock seems functionally identical, in respect to photic entrainment and generation of the rhythm, the bilaterally paired clocks form a functional unit. They interact to produce a stable time structure within individual insects by exchanging photic and temporal information through neural pathways, in which
serotonin and pigment-dispersing factor (PDF) are involved as chemical messengers. The mutual interaction also plays an important role in seasonal adaptation of the rhythm
Concentration effects on the dynamics of liquid crystalline self-assembly: Time-resolved X-ray scattering studies.
A manifold of ordering transitions relevant to chemical and biological systems occur at interfaces from liquids to self-assembled soft solids like membranes or liquid crystals. In the present case, we were interested in understanding the phase transition from the microemulsion phase to the liquid crystal phase in terms of their driving forces, i.e., activation energy and entropy. The purpose of this work was to clarify the influence of concentration effects of the amphiphilic molecules on the nature of these self-assembly processes. By photosensitization of the model system (polyalkylglycolether (C(10)E(4)), water, decane, and cyclohexane) with laser dyes, we could effectively induce and control the phase transition through the absorption of optical photons. The photo transformation conditions were chosen in such a way that the system was in thermal equilibrium. By application of time-resolved photo small-angle X-ray scattering we could monitor the conversion process and demonstrate that the surfactant concentration has a direct impact on the activation energy, which is observable through the length of the induction time
Open Repair Versus Thoracic Endovascular Aortic Repair in Multiple-Injured Patients: Observations From a Level-1 Trauma Center
Background: Blunt trauma of the thoracic aorta is a rare but potentially life-threatening entity. Intimal tears are a domain of non-operative management, whereas all other types of lesions should be repaired urgently. There is now a clear trend favoring minimally invasive stent grafting over open surgical repair.
Objectives: The aim of the present study was to retrospectively evaluate the mortality and morbidity with either treatment option. Therefore, a retrospective observational study was performed to compare two different treatment methods at two different time periods at one trauma center.
Patients and Methods: Between 1977 and 2012, all severely injured patients referred to our level 1 trauma center were screened for blunt aortic injuries. We compared baseline characteristics, 30-day and overall mortality, morbidity, duration of intensive care treatment, procedure time, and transfusion of packed red blood between patients who underwent open surgical or stent repair.
Results: During the observation period, 45 blunt aortic injuries were recorded. The average Injury Severity Score (ISS) was 41.8 (range 29 - 68). Twenty-five patients underwent Open Repair (OR), and another 20 patients were scheduled to emergency stent grafting. The 30-day mortality in the surgical and stent groups were 5/25 (20%) and 2/20 (10%), respectively. The average time for open surgery was 151 minutes; the mean time for stent grafting was 67 minutes (P = 0.001). Postoperative stay on the intensive care unit was between one and 59 days (median 10) in group one and between four and 50 days in group two (median 26)(P = 0.03). Patients undergoing OR required transfusion of 6.0 units of packed red cells in median; patients undergoing stent grafting required a median of 2.0 units of packed red cells (P < 0.001). In the stent grafting group, 30-day mortality was 10% (2/20).
Conclusions: Due to more sophisticated diagnostic tools and surgical approaches, mortality and morbidity of blunt aortic injuries were significantly reduced over the years compared to thoracic endovascular aortic repair and OR over two different time periods
The importance of structural softening for the evolution and architecture of passive margins
Lithospheric extension can generate passive margins that bound oceans worldwide. Detailed geological and geophysical studies in present and fossil passive margins have highlighted the complexity of their architecture and their multi-stage deformation history. Previous modeling studies have shown the significant impact of coarse mechanical layering of the lithosphere (2 to 4 layer crust and mantle) on passive margin formation. We built upon these studies and design high-resolution (~100-300 m) thermo-mechanical numerical models that incorporate finer mechanical layering (kilometer scale) mimicking tectonically inherited heterogeneities. During lithospheric extension a variety of extensional structures arises naturally due to (1) structural softening caused by necking of mechanically strong layers and (2) the establishment of a network of weak layers across the deforming multi-layered lithosphere. We argue that structural softening in a multi-layered lithosphere is the main cause for the observed multi-stage evolution and architecture of magma-poor passive margins
Wood hemicelluloses as effective wall materials for spray-dried microcapsulation of polyunsaturated fatty acid-rich oils
The most commonly-used and effective wall materials (WMs) for spray-dried microencapsulation of bioactive compounds are either costly, or derived from unsustainable sources, which lead to an increasing demand for alternatives derived from sustainable and natural sources, with low calories and low cost. Wood hemicelluloses obtained from by-products of forest industries appear to be attractive alternatives as they have been reported to have good emulsifying properties, low viscosity at high concentrations, high heat stability and low heat transfer. Here, we investigated the applicability of spruce galactoglucomannans (GGM) and birch glucuronoxylans (GX), to encapsulate flaxseed oil (FO, polyunsaturated fatty acid-rich plant based oil) by spray drying; and the results were compared to those of the highly effective WM, gum Arabic (GA). It was found that depending on solid ratios of WM:FO (1:1, 3:1 and 5:1), encapsulation efficiency of GGM was 88–96%, and GX was 63–98%. At the same encapsulation ratio, both GGM and GX had higher encapsulation efficiency than GA (49–92%) due to their ability to produce feed emulsions with a smaller oil droplet size and higher physical stability. In addition, the presence of phenolic residues in GGM and GX powders enabled them to have a greater ability to protect oil from oxidation during spray drying than GA. Physiochemical properties of encapsulated powders including thermal properties, morphology, molecular structure, particle size and water adsorption intake are also investigated. The study has explored a new value-added proposition for wood hemicelluloses which can be used as effective WMs in the production of microcapsules of polyunsaturated fatty acid-rich oils for healthy and functional products in food, pharmaceutical and cosmetic industries.Peer reviewe
Brownian forces in sheared granular matter
We present results from a series of experiments on a granular medium sheared
in a Couette geometry and show that their statistical properties can be
computed in a quantitative way from the assumption that the resultant from the
set of forces acting in the system performs a Brownian motion. The same
assumption has been utilised, with success, to describe other phenomena, such
as the Barkhausen effect in ferromagnets, and so the scheme suggests itself as
a more general description of a wider class of driven instabilities.Comment: 4 pages, 5 figures and 1 tabl
Wood hemicelluloses as effective wall materials for spray-dried microcapsulation of polyunsaturated fatty acid-rich oils
The most commonly-used and effective wall materials (WMs) for spray-dried microencapsulation of bioactive compounds are either costly, or derived from unsustainable sources, which lead to an increasing demand for alternatives derived from sustainable and natural sources, with low calories and low cost. Wood hemicelluloses obtained from by-products of forest industries appear to be attractive alternatives as they have been reported to have good emulsifying properties, low viscosity at high concentrations, high heat stability and low heat transfer. Here, we investigated the applicability of spruce galactoglucomannans (GGM) and birch glucuronoxylans (GX), to encapsulate flaxseed oil (FO, polyunsaturated fatty acid-rich plant based oil) by spray drying; and the results were compared to those of the highly effective WM, gum Arabic (GA). It was found that depending on solid ratios of WM:FO (1:1, 3:1 and 5:1), encapsulation efficiency of GGM was 88–96%, and GX was 63–98%. At the same encapsulation ratio, both GGM and GX had higher encapsulation efficiency than GA (49–92%) due to their ability to produce feed emulsions with a smaller oil droplet size and higher physical stability. In addition, the presence of phenolic residues in GGM and GX powders enabled them to have a greater ability to protect oil from oxidation during spray drying than GA. Physiochemical properties of encapsulated powders including thermal properties, morphology, molecular structure, particle size and water adsorption intake are also investigated. The study has explored a new value-added proposition for wood hemicelluloses which can be used as effective WMs in the production of microcapsules of polyunsaturated fatty acid-rich oils for healthy and functional products in food, pharmaceutical and cosmetic industries.Peer reviewe
The filamentation instability driven by warm electron beams: Statistics and electric field generation
The filamentation instability of counterpropagating symmetric beams of
electrons is examined with 1D and 2D particle-in-cell (PIC) simulations, which
are oriented orthogonally to the beam velocity vector. The beams are uniform,
warm and their relative speed is mildly relativistic. The dynamics of the
filaments is examined in 2D and it is confirmed that their characteristic size
increases linearly in time. Currents orthogonal to the beam velocity vector are
driven through the magnetic and electric fields in the simulation plane. The
fields are tied to the filament boundaries and the scale size of the
flow-aligned and the perpendicular currents are thus equal. It is confirmed
that the electrostatic and the magnetic forces are equally important, when the
filamentation instability saturates in 1D. Their balance is apparently the
saturation mechanism of the filamentation instability for our initial
conditions. The electric force is relatively weaker but not negligible in the
2D simulation, where the electron temperature is set higher to reduce the
computational cost. The magnetic pressure gradient is the principal source of
the electrostatic field, when and after the instability saturates in the 1D
simulation and in the 2D simulation.Comment: 10 pages, 6 figures, accepted by the Plasma Physics and Controlled
Fusion (Special Issue EPS 2009
- …