Análisis sobre la influencia de la densidad en la termografía de infrarrojos y el alcance de esta técnica en la detección de defectos internos en la madera

This paper shows the results of a laboratory phase for the determination of the 1limits of infrared thermography in detecting internal defects in wood and, furthermore, it analyses how the density of this material can influence the surface temperature displayed in a thermogram. To this end, experimental work is carried out whereby a series of work and environmental parameters are monitored (such as environmental temperature, relative humidity, distance to target), and the process is systematized by using pieces of different wood species (different densities) and by devising a set of samples for which various possible cases are analysed in terms of size and internal position of the damage. Similarly, using these samples, a study has been conducted on the effect on the thermal image produced by an increase of humidity inside the defect phenomena normally associated with wood decay.En el presente artículo se muestran los resultados obtenidos en una fase de laboratorio al tratar de determinar el alcance de la termografía de infrarrojos en la detección de defectos internos en la madera y, por otro lado, cómo interviene la densidad de este material sobre la temperatura superficial mostrada en un termograma. Para ello se ha desarrollado un trabajo experimental donde se han controlado una serie de parámetros ambientales y de trabajo (temperatura ambiente, humedad relativa, distancia al objetivo…), y se ha sistematizado el proceso utilizando piezas de distintas especies de madera (distintas densidades) y diseñando una serie de probetas donde se han analizado varias casuísticas posibles en cuanto a tamaño y posición interna de los daños. Análogamente, sobre estas probetas se ha estudiado el efecto que produce sobre la imagen termográfica un incremento de humedad interna en el defecto asociada normalmente a los fenómenos de pudrición de la madera

The fight for accretion: discovery of intermittent mass transfer in BB Doradus in the low state

Our long-term photometric monitoring of southern nova-like cataclysmic variables with the 1.3-m SMARTS telescope found BB Doradus fading from V ~ 14.3 towards a deep low state at V ~ 19.3 in April 2008. Here we present time-resolved optical spectroscopy of BB Dor in this faint state in 2009. The optical spectrum in quiescence is a composite of a hot white dwarf with Teff = 30000 +- 5000 K and a M3-4 secondary star with narrow emission lines (mainly of the Balmer series and HeI) superposed. We associate these narrow profiles with an origin on the donor star. Analysis of the radial velocity curve of the H-alpha emission from the donor star allowed the measurement of an orbital period of 0.154095 +- 0.000003 d (3.69828 +- 0.00007 h), different from all previous estimates. We detected episodic accretion events which veiled the spectra of both stars and radically changed the line profiles within a timescale of tens of minutes. This shows that accretion is not completely quenched in the low state. During these accretion episodes the line wings are stronger and their radial velocity curve is delayed by ~ 0.2 cycle, similar to that observed in SW Sex and AM Her stars in the high state, with respect to the motion of the white dwarf. Two scenarios are proposed to explain the extra emission: impact of the material on the outer edge of a cold, remnant accretion disc, or the combined action of a moderately magnetic white dwarf (B1 <~ 5 MG) and the magnetic activity of the donor star.Comment: 10 pages, 10 figures, accepted by MNRA

Determinación de las características mecánicas de los muros de fábrica de ladrillo en la arquitectura doméstica sevillana de los siglos XVIII Y XIX

The main aim consists on improving the information technology tools in order to make models of the real situation (constructive, geometrical, resistant) of the structural elements, as well as getting the restoration or support proposals. We have developed the work in some stages: – Analysis,inspection, measurement, and evolution of the building. – Extraction and analysis in laboratory of small samples of masonry walls to determine the strength parameters of materials. – Experimental studie for determination of a model and obtaining the compression stresses of the masonry walls studied. – The monitoring instrumentation which has been used is an accelerograph to evaluate the rigidity of the walls. – Application of Finite Elements Method in order to obtain the stresses distribution before and after any change in the building. The final aim is to be able to compare the results from the laboratory and the stresses distribution from the F.E.M., in order to decide the best way of getting the restoration.El resultado del trabajo permite manejar datos geométricos, constructivos y mecánicos objetivos en el momento de la recuperación de los muros estudiados y los edificios referidos. Las fases seguidas para el desarrollo del método han sido: – Análisis de edificios objeto de rehabilitación: características constructivas del muro a estudiar, levantamiento de lesiones. – Extracción y análisis en laboratorio de pequeñas muestras de la fábrica para la determinación de las características resistentes de sus materiales. – Trabajo experimental en laboratorio para elaboración de un modelo que permita la obtención de la resistencia a compresión de la fábrica estudiada. – Aplicación del acelerógrafo para medir la rigidez del edificio in situ, aproximándonos al módulo de elasticidad del muro de fábrica. – Obtención de conclusiones con la comparación de valores máximos de tensiones obtenidos para una fábrica no fisurada mediante un Análisis de Elementos Finitos, con los valores obtenidos de resistencia en los estudios anteriores. Esta comparación permitirá decidir el comportamiento de los muros ante la restauración

Análisis sobre la influencia de la densidad en la termografía de infrarrojos y el alcance de esta técnica en la detección de defectos internos en la madera

This paper shows the results of a laboratory phase for the determination of the 1limits of infrared thermography in detecting internal defects in wood and, furthermore, it analyses how the density of this material can influence the surface temperature displayed in a thermogram. To this end, experimental work is carried out whereby a series of work and environmental parameters are monitored (such as environmental temperature, relative humidity, distance to target), and the process is systematized by using pieces of different wood species (different densities) and by devising a set of samples for which various possible cases are analysed in terms of size and internal position of the damage. Similarly, using these samples, a study has been conducted on the effect on the thermal image produced by an increase of humidity inside the defect phenomena normally associated with wood decay.&lt;br&gt;&lt;br&gt;En el presente artículo se muestran los resultados obtenidos en una fase de laboratorio al tratar de determinar el alcance de la termografía de infrarrojos en la detección de defectos internos en la madera y, por otro lado, cómo interviene la densidad de este material sobre la temperatura superficial mostrada en un termograma. Para ello se ha desarrollado un trabajo experimental donde se han controlado una serie de parámetros ambientales y de trabajo (temperatura ambiente, humedad relativa, distancia al objetivo…), y se ha sistematizado el proceso utilizando piezas de distintas especies de madera (distintas densidades) y diseñando una serie de probetas donde se han analizado varias casuísticas posibles en cuanto a tamaño y posición interna de los daños. Análogamente, sobre estas probetas se ha estudiado el efecto que produce sobre la imagen termográfica un incremento de humedad interna en el defecto asociada normalmente a los fenómenos de pudrición de la madera

A hybrid analysis of LBSN data to early detect anomalies in crowd dynamics

Undoubtedly, Location-based Social Networks (LBSNs) provide an interesting source of geo-located data that we have previously used to obtain patterns of the dynamics of crowds throughout urban areas. According to our previous results, activity in LBSNs reflects the real activity in the city. Therefore, unexpected behaviors in the social media activity are a trustful evidence of unexpected changes of the activity in the city. In this paper we introduce a hybrid solution to early detect these changes based on applying a combination of two approaches, the use of entropy analysis and clustering techniques, on the data gathered from LBSNs. In particular, we have performed our experiments over a data set collected from Instagram for seven months in New York City, obtaining promising results.This work is funded by: the European Regional Development Fund (ERDF) and the Galician Regional Government under agreement for funding the Atlantic Research Center for Information and Communication Technologies (AtlantTIC), Spain, the Spanish Ministry of Economy and Competitiveness under the National Science Program (TEC2014-54335-C4-3-R, TEC2014-54335-C4-2-R, TEC2017-84197-C4-3-R and TEC2017-84197-C4-2-R), and by the Madrid Regional Government eMadrid Excellence Network, Spain (S2013/ICE-2715)

The kinematics of the quadrupolar nebula M1-75 and the identification of its central star

The link between the shaping of bipolar planetary nebulae and their central stars is still poorly understood. The kinematics and shaping of the multipolar nebula M 1-75 are hereby investigated, and the location and nature of its central star are briefly discussed. Fabry-Perot data from GHaFAS on the WHT sampling the Doppler shift of the [N II] 658.3 nm line are used to study the dynamics of the nebula, by means of a detailed 3-D spatio-kinematical model. Multi-wavelength images and spectra from the WFC and IDS on the INT, and from ACAM on the WHT, allowed us to constrain the parameters of the central star. The two pairs of lobes, angularly separated by ~22 degrees, were ejected simultaneously approx. ~3500-5000 years ago, at the adopted distance range from 3.5 to 5.0 kpc. The larger lobes show evidence of a slight degree of point symmetry. The shaping of the nebula could be explained by wind interaction in a system consisting of a post-AGB star surrounded by a disc warped by radiative instabilities. This requires the system to be a close binary or a single star which engulfed a planet as it died. On the other hand, we present broad- and narrow-band images and a low S/N optical spectrum of the highly-reddened, previously unnoticed star which is likely the nebular progenitor. Its estimated V-I colour allows us to derive a rough estimate of the parameters and nature of the central star.Comment: 8 pages, 6 figures, accepted for publication in Astronomy & Astrophysic

Combinatorial Analysis Methodologies for Accelerated Research: The Case of Chalcogenide Thin-Film Photovoltaic Technologies

One of the fastest ways for the discovery, understanding, development, and further optimization of new complex materials is the application of combinatorial analysis methodologies, which have already shown impressive results for different organic and inorganic materials, leading to the fast development of different scientific fields and industrial applications. However, in the case of thin-film materials for optoelectronic devices and, in particular, for second-generation photovoltaic (PV) devices, the application of combinatorial analysis is still quite uncommon with a desultory rather than systematic application. The present review discusses the main constraints for the application of combinatorial analysis to thin-film materials with a focus on chalcogenide compounds and different strategies to overcome them. Special attention is paid to the requirements for the preparation of graded thin films, characterization, and analysis of the results, providing different hints for the implementation of high-quality combinatorial analysis. Finally, an overview of the currently published results in the field of chalcogenide thin-film PV technologies is presented, showing the relevance of the combinatorial approach for boosting the development not only of this promising PV technology, but also of other optoelectronic devices based on complex materials and multilayered structures