Research of Elastic Parameters of Paper and Prints

Knowledge of the elastic properties of prints during printing processes is essential in printing presses. A computational inverse technique is presented to determine the elastic properties of materials. An effective technique for identification of elastic properties of prints consisting of the paper and several layers of ink and varnish is based on experimental data of modal vibration testing and finite element modelling. The aim of finite element modelling and optimization is to guess the material properties obtaining the same vibration frequencies and modes while test specimen is loaded in the same way as on printing press. Proposed technique can be used for the printing process modelling as non-destructive method during the initial design stage

Federating distributed clinical data for the prediction of adverse hypotensive events

The ability to predict adverse hypotensive events, where a patient's arterial blood pressure drops to abnormally low (and dangerous) levels, would be of major benefit to the fields of primary and secondary health care, and especially to the traumatic brain injury domain. A wealth of data exist in health care systems providing information on the major health indicators of patients in hospitals (blood pressure, temperature, heart rate, etc.). It is believed that if enough of these data could be drawn together and analysed in a systematic way, then a system could be built that will trigger an alarm predicting the onset of a hypotensive event over a useful time scale, e.g. half an hour in advance. In such circumstances, avoidance measures can be taken to prevent such events arising. This is the basis for the Avert-IT project (http://www.avert-it.org), a collaborative EU-funded project involving the construction of a hypotension alarm system exploiting Bayesian neural networks using techniques of data federation to bring together the relevant information for study and system development

Optimization of ultrasound beam transmission path within measurement channel of ultrasonic flowmeter

The numerical simulation of the water flow through the semicircular duct is presented. The results of the simulation show that by implementing such duct into ultrasonic time-of-flight flowmeters it is possible to get an almost flat and linear function of hydrodynamic correction. The optimal choice of the dimension of ultrasonic transducers and the optimal positioning of them allows us to achieve a hydrodynamic function with the slope ~ 4%. It is expected that flat hydrodynamic calibration function gives the possibility to expand the dynamic measurement range of ultrasonic flowmeters and to increase stability and repeatability of the measurement result

The brain monitoring with information technology (BrainIT) collaborative network: EC feasibility study results

The BrainIT group works collaboratively on developing standards for collection and analyses of data from brain injured patients towards providing a more efficient infrastructure for assessing new health technology. Materials and methods Over a 2 year period, core dataset data (grouped by nine categories) were collected from 200 head-injured patients by local nursing staff. Data were uploaded by the BrainIT web and random samples of received data were selected automatically by computer for validation by data validation (DV) research nurse staff against gold standard sources held in the local centre. Validated data was compared with original data sent and percentage error rates calculated by data category. Findings Comparisons, 19,461, were made in proportion to the size of the data received with the largest number checked in laboratory data (5,667) and the least in the surgery data (567). Error rates were generally less than or equal to 6%, the exception being the surgery data class where an unacceptably high error rate of 34% was found. Conclusions The BrainIT core dataset (with the exception of the surgery classification) is feasible and accurate to collect. The surgery classification needs to be revised

Unassisted solar lignin valorisation using a compartmented photo-electro-biochemical cell

Lignin is a major component of lignocellulosic biomass. Although it is highly recalcitrant to break down, it is a very abundant natural source of valuable aromatic carbons. Thus, the effective valorisation of lignin is crucial for realising a sustainable biorefinery chain. Here, we report a compartmented photo-electro-biochemical system for unassisted, selective, and stable lignin valorisation, in which a TiO2 photocatalyst, an atomically dispersed Co-based electrocatalyst, and a biocatalyst (lignin peroxidase isozyme H8, horseradish peroxidase) are integrated, such that each system is separated using Nafion and cellulose membranes. This cell design enables lignin valorisation upon irradiation with sunlight without the need for any additional bias or sacrificial agent and allows the protection of the biocatalyst from enzymedamaging elements, such as reactive radicals, gas bubbles, and light. The photo-electrobiochemical system is able to catalyse lignin depolymerisation with a 98.7% selectivity and polymerisation with a 73.3% yield using coniferyl alcohol, a lignin monomer

Phenotype MicroArray Profiling of Zymomonas mobilis ZM4

In this study, we developed a Phenotype MicroArray™ (PM) protocol to profile cellular phenotypes in Zymomonas mobilis, which included a standard set of nearly 2,000 assays for carbon, nitrogen, phosphorus and sulfur source utilization, nutrient stimulation, pH and osmotic stresses, and chemical sensitivities with 240 inhibitory chemicals. We observed two positive assays for C-source utilization (fructose and glucose) using the PM screen, which uses redox chemistry and cell respiration as a universal reporter to profile growth phenotypes in a high-throughput 96-well plate-based format. For nitrogen metabolism, the bacterium showed a positive test results for ammonia, aspartate, asparagine, glutamate, glutamine, and peptides. Z. mobilis appeared to use a diverse array of P-sources with two exceptions being pyrophosphate and tripolyphosphate. The assays suggested that Z. mobilis uses both inorganic and organic compounds as S-sources. No stimulation by nutrients was detected; however, there was evidence of partial inhibition by purines and pyrimidines, NAD, and deferoxamine. Z. mobilis was relatively resistant to acid pH, tolerating a pH down to about 4.0. It also tolerated phosphate, sulfate, and nitrate, but was rather sensitive to chloride and nitrite. Z. mobilis showed resistance to a large number of diverse chemicals that inhibit most bacteria. The information from PM analysis provides an overview of Z. mobilis physiology and a foundation for future comparisons of other wild-type and mutant Z. mobilis strains