Ti3SiC2-formation during Ti–C–Si multilayer deposition by magnetron sputtering at 650 °C

Titanium Silicon Carbide films were deposited from three separate magnetrons with elemental targets onto Si wafer substrates. The substrate was moved in a circular motion such that the substrate faces each magnetron in turn and only one atomic species (Ti, Si or C) is deposited at a time. This allows layer-by-layer film deposition. Material average composition was determined to Ti0.47Si0.14C0.39 by energy-dispersive X-ray spectroscopy. High-resolution transmission electron microscopy and Raman spectroscopy were used to gain insights into thin film atomic structure arrangements. Using this new deposition technique formation of Ti3SiC2 MAX phase was obtained at a deposition temperature of 650 °C, while at lower temperatures only silicides and carbides are formed. Significant sharpening of Raman E2g and Ag peaks associated with Ti3SiC2 formation was observed

Decision Support Tools for Urban Water and Wastewater Systems –Focussing on Hazardous Flows Assessment

Abstract The Swedish research programme Urban Water has developed a concept of a multi-criteria basis intended to support decision-making for urban water and wastewater systems. Five criteria groups were established for sustainability assessment of urban water systems: Health and Hygiene, Environment, Economy, Socio-culture, and Technology. Each criterion requires a set of indicators corresponding to quantifiable facts and figures, or qualitative data to comparatively assess the different alternatives in the decision process. The decision support process starts as a baseline study where the existing conditions are addressed. Alternative strategies of the future urban water system are developed and analysed by different tools and methodologies in assessing the five criteria groups. Eventually, the results and conclusions are integrated and synthesised into a basis for decision-making. As an example of a decision support basis for chemical safety, a barrier perspective was introduced to find out if and to what extent hazardous substances can be stopped, diverged, or transformed at various points in the wastewater system. A set of barriers was suggested, i.e. behaviour, systems design, process design, optional recipients, and organisational. The barrier approach was applied to two alternative municipal wastewater system designs -a combined wastewater system vs. a source separated system -analysing the fate of phosphorus, cadmium, and triclosan. The study showed that the combined system caused a higher substance flow to the receiving waterbody than the separated system. The combined system also brought more phosphorus and cadmium to the farmland than the separated system, but only half the amount of triclosan

Electronic structure and chemical bonding in Ti2AlC investigated by soft x-ray emission spectroscopy

The electronic structure of the nanolaminated transition metal carbide Ti2AlC has been investigated by bulk-sensitive soft x-ray emission spectroscopy. The measured Ti L, C K and Al L emission spectra are compared with calculated spectra using ab initio density-functional theory including dipole matrix elements. The detailed investigation of the electronic structure and chemical bonding provides increased understanding of the physical properties of this type of nanolaminates. Three different types of bond regions are identified; the relatively weak Ti 3d - Al 3p hybridization 1 eV below the Fermi level, and the Ti 3d - C 2p and Ti 3d - C 2s hybridizations which are stronger and deeper in energy are observed around 2.5 eV and 10 eV below the Fermi level, respectively. A strongly modified spectral shape of the 3s final states in comparison to pure Al is detected for the buried Al monolayers indirectly reflecting the Ti 3d - Al 3p hybridization. The differences between the electronic and crystal structures of Ti2AlC, Ti3AlC2 and TiC are discussed in relation to the number of Al layers per Ti layer in the two former systems and the corresponding change of the unusual materials properties.Comment: 14 pages, 7 figures; PACS:78.70.En, 71.15.Mb, 71.20.-

Electronic structure and chemical bonding in Ti4SiC3 investigated by soft x-ray emission spectroscopy and first principle theory

The electronic structure in the new transition metal carbide Ti4SiC3 has been investigated by bulk-sensitive soft x-ray emission spectroscopy and compared to the well-studied Ti3SiC2 and TiC systems. The measured high-resolution Ti L, C K and Si L x-ray emission spectra are discussed with ab initio calculations based on density-functional theory including core-to-valence dipole matrix elements. The detailed investigations of the Ti-C and Ti-Si chemical bonds provide increased understanding of the physical properties of these nanolaminates. A strongly modified spectral shape is detected for the buried Si monolayers due to Si 3p hybridization with the Ti 3d orbitals. As a result of relaxation of the crystal structure and the charge-transfer from Ti (and Si) to C, the strength of the Ti-C covalent bond is increased. The differences between the electronic and crystal structures of Ti4SiC3 and Ti3SiC2 are discussed in relation to the number of Si layers per Ti layer in the two systems and the corresponding change of materials properties.Comment: 12 pages, 7 figures, 1 tabl

Electronic structure investigation of Ti3AlC2, Ti3SiC2, and Ti3GeC2 by soft-X-ray emission spectroscopy

The electronic structures of epitaxially grown films of Ti3AlC2, Ti3SiC2 and Ti3GeC2 have been investigated by bulk-sensitive soft X-ray emission spectroscopy. The measured high-resolution Ti L, C K, Al L, Si L and Ge M emission spectra are compared with ab initio density-functional theory including core-to-valence dipole matrix elements. A qualitative agreement between experiment and theory is obtained. A weak covalent Ti-Al bond is manifested by a pronounced shoulder in the Ti L-emission of Ti3AlC2. As Al is replaced with Si or Ge, the shoulder disappears. For the buried Al and Si-layers, strongly hybridized spectral shapes are detected in Ti3AlC2 and Ti3SiC2, respectively. As a result of relaxation of the crystal structure and the increased charge-transfer from Ti to C, the Ti-C bonding is strengthened. The differences between the electronic structures are discussed in relation to the bonding in the nanolaminates and the corresponding change of materials properties.Comment: 15 pages, 8 figure

Measuring the value of air quality: application of the spatial hedonic model

This study applies a hedonic model to assess the economic benefits of air quality improvement following the 1990 Clean Air Act Amendment at the county level in the lower 48 United States. An instrumental variable approach that combines geographically weighted regression and spatial autoregression methods (GWR-SEM) is adopted to simultaneously account for spatial heterogeneity and spatial autocorrelation. SEM mitigates spatial dependency while GWR addresses spatial heterogeneity by allowing response coefficients to vary across observations. Positive amenity values of improved air quality are found in four major clusters: (1) in East Kentucky and most of Georgia around the Southern Appalachian area; (2) in a few counties in Illinois; (3) on the border of Oklahoma and Kansas, on the border of Kansas and Nebraska, and in east Texas; and (4) in a few counties in Montana. Clusters of significant positive amenity values may exist because of a combination of intense air pollution and consumer awareness of diminishing air quality

Comparison of thermal stability in MAX211 and 312 phases

The susceptibility of four MAX phases (Ti2AlC, Cr2AlC, Ti3AlC2, and Ti3SiC2) to high-temperature thermal dissociation in vacuum has been investigated using in-situ neutron diffraction. In high vacuum, these phases decomposed above 1400°C through the sublimation of M and A elements, forming a surface coating of MC. The apparent activation energies for the decomposition of sintered Ti3SiC2, Ti3AlC2, and Ti2AlC were determined to be 179.3, -71.9, and 85.7 kJ mol−1, respectively. The spontaneous release of Ti2AlC and TiC from de-intercalation during decomposition of Ti3AlC2 resulted in a negative activation energy

Public Benefits of Undeveloped Lands on Urban Outskirts: Non-Market Valuation Studies and their Role in Land Use Plans

Over the past three decades, the economics profession has developed methods for estimating the public benefits of green spaces, providing an opportunity to incorporate such information into land-use planning. While federal regulations routinely require such estimates for major regulations, the extent to which they are used in local land use plans is not clear. This paper reviews the literature on public values for lands on urban outskirts, not just to survey their methods or empirical findings, but to evaluate the role they have played--or have the potential to play-- in actual land use plans. Based on interviews with authors and representatives of funding agencies and local land trusts, it appears that academic work has had a mixed reception in the policy world. Reasons for this include a lack of interest in making academic work accessible to policy makers, emphasizing revealed preference methods which are inconsistent with policy priorities related to nonuse values, and emphasis on benefit-cost analyses. Nevertheless, there are examples of success stories that illustrate how such information can play a vital role in the design of conservation policies. Working Paper 07-2

Contracting Agile Developments for Mission Critical Systems in the Public Sector

Although Agile is a well established software development paradigm, major concerns arise when it comes to contracting issues between a software consumer and a software producer. How to contractualize the Agile production of software, especially for security & mission critical organizations, which typically outsource software projects, has been a major concern since the beginning of the \u201cAgile Era.\u201d In literature, little has been done, from a foundational point of view regarding the formalization of such contracts. Indeed, when the development is outsourced, the management of the contractual life is non\u2013trivial. This happens because the interests of the two parties are typically not aligned. In these situations, software houses strive for the minimization of the effort, while the customer commonly expects high quality artifacts. This structural asymmetry can hardly be overcome with traditional \u201cWaterfall\u201d contracts. In this work, we propose a foundational approach to the Law & Economics of Agile contracts. Moreover, we explore the key elements of the Italian procurement law and outline a suitable solution to merge some basic legal constraints with Agile requirements. Finally, a case study is presented, describing how Agile contracting has been concretely implemented in the Italian Defense Acquisition Process. This work is intended to be a framework for Agile contracts for the Italian public sector of critical systems, according to the new contractual law (Codice degli Appalti)