229 research outputs found

    Proton Driven Plasma Wakefield Acceleration

    Full text link
    Plasma wakefield acceleration, either laser driven or electron-bunch driven, has been demonstrated to hold great potential. However, it is not obvious how to scale these approaches to bring particles up to the TeV regime. In this paper, we discuss the possibility of proton-bunch driven plasma wakefield acceleration, and show that high energy electron beams could potentially be produced in a single accelerating stage.Comment: 13 pages, 4 figure

    Enhancing the accuracy of non-invasive glucose sensing in aqueous solutions using combined millimeter wave and near infrared transmission

    Get PDF
    We reported measurement results relating to non-invasive glucose sensing using a novel multiwavelength approach that combines radio frequency and near infrared signals in transmission through aqueous glucose-loaded solutions. Data were collected simultaneously in the 37–39 GHz and 900–1800 nm electromagnetic bands. We successfully detected changes in the glucose solutions with varying glucose concentrations between 80 and 5000 mg/dl. The measurements showed for the first time that, compared to single modality systems, greater accuracy on glucose level prediction can be achieved when combining transmission data from these distinct electromagnetic bands, boosted by machine learning algorithms.This research was funded partially by Innovate UK project 104554 (2019–2021)

    A relocatable ocean model in support of environmental emergencies

    Get PDF
    During the Costa Concordia emergency case, regional, subregional, and relocatable ocean models have been used together with the oil spill model, MEDSLIK-II, to provide ocean currents forecasts, possible oil spill scenarios, and drifters trajectories simulations. The models results together with the evaluation of their performances are presented in this paper. In particular, we focused this work on the implementation of the Interactive Relocatable Nested Ocean Model (IRENOM), based on the Harvard Ocean Prediction System (HOPS), for the Costa Concordia emergency and on its validation using drifters released in the area of the accident. It is shown that thanks to the capability of improving easily and quickly its configuration, the IRENOM results are of greater accuracy than the results achieved using regional or subregional model products. The model topography, and to the initialization procedures, and the horizontal resolution are the key model settings to be configured. Furthermore, the IRENOM currents and the MEDSLIK-II simulated trajectories showed to be sensitive to the spatial resolution of the meteorological fields used, providing higher prediction skills with higher resolution wind forcing.MEDESS4MS Project; TESSA Project; MyOcean2 Projectinfo:eu-repo/semantics/publishedVersio

    Improvements in wind speed forecasts for wind power prediction purposes using Kalman filtering

    No full text
    International audienceThis paper studies the application of Kalman filtering as a post-processing method in numerical predictions of wind speed. Two limited-area atmospheric models have been employed, with different options/capabilities of horizontal resolution, to provide wind speed forecasts. The application of Kalman filter to these data leads to the elimination of any possible systematic errors, even in the lower resolution cases, contributing further to the significant reduction of the required CPU time. The potential of this method in wind power applications is also exploited. In particular, in the case of wind power prediction, the results obtained showed a remarkable improvement in the model forecasting skill

    Climatic Feedbacks and Desertification: The Mediterranean Model

    Get PDF
    Abstract Mesometeorological information obtained in several research projects in southern Europe has been used to analyze perceived changes in the western Mediterranean summer storm regime. A procedure was developed to disaggregate daily precipitation data into three main components: frontal precipitation, summer storms, and Mediterranean cyclogenesis. Working hypotheses were derived on the likely processes involved. The results indicate that the precipitation regime in this Mediterranean region is very sensitive to variations in surface airmass temperature and moisture. Land-use perturbations that accumulated over historical time and greatly accelerated in the last 30 yr may have induced changes from an open, monsoon-type regime with frequent summer storms over the mountains inland to one dominated by closed vertical recirculations where feedback mechanisms favor the loss of storms over the coastal mountains and additional heating of the sea surface temperature during summer. This, in turn, favors Mediterranean cyclogenesis and torrential rains in autumn–winter. Because these intense rains and floods can occur anywhere in the basin, perturbations to the hydrological cycle in any part of the basin can propagate to the whole basin and adjacent regions. Furthermore, present levels of air pollutants can produce greenhouse heating, amplifying the perturbations and pushing the system over critical threshold levels. The questions raised are relevant for the new European Union (EU) water policies in southern Europe and for other regions dominated by monsoon-type weather systems

    Anemos : development of a next generation wind power forecasting system for the large-scale integration of onshore & offshore wind farms

    No full text
    International audienceThis paper presents the objectives and the research work carried out in the frame of the ANEMOS project on short-term wind power forecasting. The aim of the project is to develop accurate models that substantially outperform current state-of-the-art methods, for onshore and offshore wind power forecasting, exploiting both statistical and physical modeling approaches. The project focus on prediction horizons up to 48 hours ahead and investigates predictability of wind for higher horizons up to 7 days ahead useful i.e. for maintenance scheduling. Emphasis is given on the integration of highresolution meteorological forecasts. For the offshore case, marine meteorology is considered as well as information by satellite-radar images. An integrated software platform, ‘ANEMOS', is developed to host the various models. This system will be installed by several utilities for on-line operation at onshore and offshore wind farms for prediction at a local, regional and national scale. The applications include different terrain types and wind climates, on- and offshore cases, and interconnected or island grids. The on-line operation by the utilities will allow validation of the models and an analysis of the value of wind prediction for a competitive integration of wind energy in the developing liberalized electricity markets in the EU

    Next Generation Short-Term Forecasting of Wind Power – Overview of the ANEMOS Project.

    No full text
    International audienceThe aim of the European Project ANEMOS is to develop accurate and robust models that substantially outperform current state-of-the-art methods, for onshore and offshore wind power forecasting. Advanced statistical, physical and combined modelling approaches were developed for this purpose. Priority was given to methods for on-line uncertainty and prediction risk assessment. An integrated software platform, 'ANEMOS', was developed to host the various models. This system is installed by several end-users for on-line operation and evaluation at a local, regional and national scale. Finally, the project demonstrates the value of wind forecasts for the power system management and market integration of wind power. Keywords: Wind power, short-term forecasting, numerical weather predictions, on-line software, tools for wind integration

    Expansion and Harvesting of hMSC-TERT

    Get PDF
    The expansion of human mesenchymal stem cells as suspension culture by means of spinner flasks and microcarriers, compared to the cultivation in tissue culture flasks, offers the advantage of reducing the requirements of large incubator capacities as well as reducing the handling effort during cultivation and harvesting. Nonporous microcarriers are preferable when the cells need to be kept in viable condition for further applications like tissue engineering or cell therapy. In this study, the qualification of Biosilon, Cytodex 1, Cytodex 3, RapidCell and P102-L for expansion of hMSC-TERT with an associated harvesting process using either trypsin, accutase, collagenase or a trypsin-accutase mixture was investigated. A subsequent adipogenic differentiation of harvested hMSC-TERT was performed in order to observe possible negative effects on their (adipogenic) differentiation potential as a result of the cultivation and harvesting method. The cultivated cells showed an average growth rate of 0.52 d-1. The cells cultivated on Biosilon, RapidCell and P102-L were harvested succesfully achieving high cell yield and vitalities near 100%. This was not the case for cells on Cytodex 1 and Cytodex 3. The trypsin-accutase mix was most effective. After spinner expansion and harvesting the cells were successfully differentiated to adipocytes

    Retrieval of optical and microphysical properties of transported Saharan dust over Athens and Granada based on multi-wavelength Raman lidar measurements: Study of the mixing processes

    Get PDF
    In this paper we extract the aerosol microphysical properties for a collection of mineral dust cases measured by multi-wavelength depolarization Raman lidar systems located at the National Technical University of Athens (NTUA, Athens, Greece) and the Andalusian Institute for Earth System Research (IISTA-CEAMA, Granada, Spain). The lidar-based retrievals were carried out with the Spheroidal Inversion eXperiments software tool (SphInX) developed at the University of Potsdam (Germany). The software uses regularized inversion of a two-dimensional enhancement of the Mie model based on the spheroid-particle approximation with the aspect ratio determining the particle shape. The selection of the cases was based on the transport time from the source regions to the measuring sites. The aerosol optical depth as measured by AERONET ranged from 0.27 to 0.54 (at 500 nm) depending on the intensity of each event. Our analysis showed the hourly mean particle linear depolarization ratio and particle lidar ratio values at 532 nm ranging from 11 to 34% and from 42 to 79 sr respectively, depending on the mixing status, the corresponding air mass pathways and their transport time. Cases with shorter transport time showed good agreement in terms of the optical and SphInX-retrieved microphysical properties between Athens and Granada providing a complex refractive index value equal to 1.4 + 0.004i. On the other hand, the results for cases with higher transport time deviated from the aforementioned ones as well as from each other, providing, in particular, an imaginary part of the refractive index ranging from 0.002 to 0.005. Reconstructions of two-dimensional shape-size distributions for each selected layer showed that the dominant effective particle shape was prolate with diverse spherical contributions. The retrieved volume concentrations reflect overall the intensity of the episodes.Spanish Ministry of Sciences, Innovation and Universities through project CGL2016-81092,Spanish Ministry of Education, Culture and Sports through grant FPU14/0368

    Perioperative mortality after hemiarthroplasty related to fixation method: A study based on the Australian Orthopaedic Association National Joint Replacement Registry

    Get PDF
    Background and purpose: The appropriate fixation method for hemiarthroplasty of the hip as it relates to implant survivorship and patient mortality is a matter of ongoing debate. We examined the influence of fixation method on revision rate and mortality.----- ----- Methods: We analyzed approximately 25,000 hemiarthroplasty cases from the AOA National Joint Replacement Registry. Deaths at 1 day, 1 week, 1 month, and 1 year were compared for all patients and among subgroups based on implant type.----- ----- Results: Patients treated with cemented monoblock hemiarthroplasty had a 1.7-times higher day-1 mortality compared to uncemented monoblock components (p < 0.001). This finding was reversed by 1 week, 1 month, and 1 year after surgery (p < 0.001). Modular hemiarthroplasties did not reveal a difference in mortality between fixation methods at any time point.----- ----- Interpretation: This study shows lower (or similar) overall mortality with cemented hemiarthroplasty of the hip
    • 

    corecore