117 research outputs found
Impact of climate on pipe failure: predictions of failures for drinking water distribution systems
The integrity of drinking water distribution systems (DWDS) may be influenced by climate change. Using the statistical relations between failure frequencies and weather conditions described in our previous work (Wols & Van Thienen 2014a), a methodology is proposed to assess the effect of climate change on future DWDSs. The effect of climate change is combined with the evolution of the DWDS. This analysis can be conducted for any DWDS, for which historical failure registrations and weather parameters are available. The proposed methodology can therefore assist in the construction and maintenance planning of DWDSs. The methodology has been worked out for the Dutch drinking water distribution network. The results show that failures in networks with high AC proportions will increase as a result of expected climate change in the Netherlands, whereas failures in networks with high PVC and GCI proportions will even slightly reduce
Critical Design Criteria for Standard, Truncated, and Parallel Chords Cold-Formed Steel Trusses
The design of cold-formed steel trusses can be a very complicated and long repetitive process involving up to 28 load combinations added to serviceability checks depending on the design standards being used. This process is particularly tedious if a near optimal solution is required. Additionally, the risk of introducing human errors is usually quite high as it is a process often done by hand. FRAMECAD Structure is a niche software solution born from the desire to provide a complete solution for constructing with cold-formed steel by a company selling roll-forming machines. FRAMECAD Structure specialises on automating the calculations and design of cold-formed steel framed panels, trusses and joists with minimal user input. However, computational-oriented software applications are often not optimised for performance, hence the inefficiency in obtaining a design solution, i.e. the proposed solution is either not optimal or takes a considerable time to compute. To provide guidelines on the design of cold-formed trusses, this research uses FRAMECAD Structure to study which design parameters are critical and what impact they have on optimising the design outcome
Review of applications of SIMDEUM, a stochastic drinking water demand model with small temporal and spatial scale
Many researchers have developed drinking water demand models with various temporal and spatial scales. A limited number of models are available at a temporal scale of one second and a spatial scale of a single home. Reasons for
building these models were described in the papers in which the models were introduced, along with a discussion on
potential applications. However, the predicted applications are seldom re-examined. As SIMDEUM, a stochastic end-use
model for drinking water demand, has often been applied in research and practice since it was developed, we are reexamining
its applications in this paper. SIMDEUM’s original purpose was to calculate maximum demands in order to be able to design self-cleaning networks. Yet, the model has been useful in many more applications. This paper gives an
overview of the many fields of application of SIMDEUM and shows where this type of demand model is indispensable and
where it has limited practical value. This overview also leads to an understanding of requirements on demand models in
various applications
Review of applications for SIMDEUM, a stochastic drinking water demand model with a small temporal and spatial scale
Many researchers have developed drinking water demand models with various temporal and spatial scales. A limited number of models is available at a temporal scale of 1 s and a spatial scale of a single home. The reasons for building these models were described in the papers in which the models were introduced, along with a discussion on their potential applications. However, the predicted applications are seldom re-examined. SIMDEUM, a stochastic end-use model for drinking water demand, has often been applied in research and practice since it was developed. We are therefore re-examining its applications in this paper. SIMDEUM's original purpose was to calculate maximum demands in order to design self-cleaning networks. Yet, the model has been useful in many more applications. This paper gives an overview of the many fields of application for SIMDEUM and shows where this type of demand model is indispensable and where it has limited practical value. This overview also leads to an understanding of the requirements for demand models in various applications
Technical note: Problem-specific variators in a genetic algorithm for the optimization of drinking water networks
Genetic algorithms can be a powerful tool for the automated design
of optimal drinking water distribution networks. Fast convergence of such
algorithms is a crucial factor for successful practical implementation at
the drinking water utility level. In this technical note, we therefore
investigate the performance of a suite of genetic variators that was
tailored to the optimization of a least-cost network design. Different
combinations of the variators are tested in terms of convergence rate and
the robustness of the results during optimization of the real-world drinking
water distribution network of Sittard, the Netherlands. The variator
configurations that reproducibly reach the furthest convergence after
105 function evaluations are reported. In the future these may aid in
dealing with the computational challenges of optimizing real-world networks.</p
Climate adaptation of interconnected infrastructures: a framework for supporting governance
Infrastructures are critical for human society, but vulnerable to climate change. The current body of research on infrastructure adaptation does not adequately account for the interconnectedness of infrastructures, both internally and with one another. We take a step toward addressing this gap through the introduction of a framework for infrastructure adaptation that conceptualizes infrastructures as complex socio-technical “systems of systems” embedded in a changing natural environment. We demonstrate the use of this framework by structuring potential climate change impacts and identifying adaptation options for a preliminary set of cases—road, electricity and drinking water infrastructures. By helping to clarify the relationships between impacts at different levels, we find that the framework facilitates the identification of key nodes in the web of possible impacts and helps in the identification of particularly nocuous weather conditions. We also explore how the framework may be applied more comprehensively to facilitate adaptation governance. We suggest that it may help to ensure that the mental models of stakeholders and the quantitative models of researchers incorporate the essential aspects of interacting climate and infrastructure systems. Further research is necessary to test the framework in these contexts and to determine when and where its application may be most beneficial.Infrastructure Networks Climate Adaptation and Hotspots. Knowledge for Climate Progra
Methods for thermochemical convection in Earth's mantle with force‐balanced plates
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94785/1/ggge1131.pd
Immune checkpoint inhibition-related colitis: symptoms, endoscopic features, histology and response to management
Background: Immune checkpoint inhibitors are successfully introduced as anticancer treatment. However, they may induce severe immune-related adverse events (irAEs). One of the most frequent irAEs is diarrhoea. The main objective of this study was to analyse symptoms (ie, grade of diarrhoea), endoscopic and histological features and response to management in immune checkpoint inhibition-related colitis (IRC). Patients and methods: We retrospectively analysed patients who developed diarrhoea on checkpoint inhibition and therefore underwent an endoscopy and/or were treated with corticosteroids. Patients were treated between August 2010 and March 2016 for metastatic melanoma or non-small cell lung cancer. Severity of IRC was scored using the endoscopic Mayo score and the van der Heide score. Results: Out of a cohort of 781 patients, 92 patients were identified who developed diarrhoea and therefore underwent an endoscopy and/or were treated with corticosteroids. Patients were treated with monotherapy anticytotoxic T-lymphocyte antigen-4, antiprogrammed death receptor-1 or a combination of both. All patients had symptoms of diarrhoea (grade 1: 16%; grade 2: 39% and grade 3: 44%). A complete colonoscopy was performed in 62 (67%) patients, of whom 42 (68%) had a pancolitis (>/=3 affected segments). Ulcers were seen in 32% of endoscopies. There was no significant correlation between the grade of diarrhoea at presentation and endoscopic severity scores, the presence of ulcers or histological features. In 54 episodes of diarrhoea (56%), patients received one or more cycles infliximab for steroid-refractory colitis. Patients with higher endoscopic severity scores, ulcers and/or a pancolitis needed infliximab more often. Conclusions: The correlation between grade of diarrhoea and endoscopic or histological features for severity of colitis is poor. Patients with higher endoscopic severity scores, ulcers or a pancolitis needed the addition of infliximab more often. Therefore, endoscopy may have value in the evaluation of the severity of IRC and may help in decision making for optimal management
Methionine metabolism by rat muscle and other tissues. Occurrence of a new carnitine intermediate
Deep storage of oceanic crust in a vigorously convecting mantle
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94626/1/jgrb15203.pd
- …