The Austrian Sawmill Industry - Some Possible Futures

The Austrian forest industry consumed about 14.5 million m3/u.b. industrial roundwood in 1980 to compare with a total domestic cutting of 13 million m3/u.b. The dominating primary manufacturer is the sawmilling industry which in 1980 consumed about 70% of the total industrial wood consumption. About 65% of the sawnwood production is exported. In this paper, four scenarios are presented for the Austrian saw mills. These scenarios show that future problems such as (i) overcapacity; (ii) insufficient supply of wood raw material and (iii) low profitability -- may arise. These problems could be solved by (1) intensified marketing, (2) intensified domestic cutting, (3) long-term import agreements for wood, and (4) a continued modernization of the industry

Comparison of Two Models of the Austrian Forest Sector

The paper presents two different modelling approaches for the Austrian forest sector. While the ATM (Austrian Trade Model) is a normative optimization model, based on the Global Trade Model developed at IIASA, the FOHOW (Simulation Model of the Austrian Forest Sector) is a descriptive simulation model, written in the Dynamo simulation language. ATM and FOHOW also differ in scope, with ATM being a global model covering the whole world (nine separate regions with Austria as the center) and FOHOW being basically a national model for Austria. Both models include the whole forest sector from timber growth to paper consumption. Thus the level of detail is naturally low. The ATM deals with fourteen, the FOHOW with nine different products ranging from raw materials (e.g. roundwood) to final products (e.g. paper). The models can be used mainly for long-term policy analysis ("what-if" questions) rather than for forecasting purposes. While an ATM-run starts at 1980, a FOHOW-run already begins in 1965; both end at 2030. Beside a base scenario, several scenarios were tested in parallel for both models under similar assumptions. The results of a selected number of scenario-runs are presented. The paper closes with a discussion of model strengths and weaknesses in terms of implementation, conceptual issues and potential for improvements

Моделирование кинетики прямого амидирования жирных кислот диэтаноламином

BACKGROUND: , Aims and Scope. In oil spill investigations, one of the most important steps is a proper choice of approaches that imply an investigation of samples taken from different sedimentary environments, samples of oil contaminants taken in different periods of time and samples taken at different distances from the oil spill. In all these cases, conclusion on the influence of the environment, microorganisms or migration on the oil contaminants' composition can be drawn from the comparison of chemical compositions of the investigated contaminants. However, in case of water contaminants, it is very important to define which part of organic matter has been analyzed. Namely, previous investigations showed that there were some differences in chemical composition of the same oil contaminant depending on the intensity of its contact with ground water. The aim of this work is to define more precisely the interactions between oil contaminant and water, i.e. the influence of the intensity of interaction between the oil contaminant and water on its chemical composition. The study was based on a comparison of four fractionated extracts of an oil pollutant, after they had been analyzed in details. Methods. Oil polluted surface water (wastewater canal, Pancevo, Serbia) was investigated. The study was based on a comparison of four extracts of an oil contaminant: extract I (decanted part), and extracts 2, 3 and 4 (extracted by shaking for 1 minute, 5 minutes and 24 hours, respectively). The fractionated extracts were saponified with a solution of KOH in methanol, and neutralized with 10% hydrochloric acid. The products were dissolved in a mixture of dichloromethane and hexane, and individually fractionated by column chromatography on alumina and silica gel (saturated hydrocarbon, aromatic, alcohol and fatty acid fractions). n-Alkanes and isoprenoid aliphatic alkanes, polycyclic alkanes of sterane and triterpane types, alcohols and fatty acids were analyzed using gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). delta C-13(PDB) values of individual n-alkanes in the aliphatic fractions were determined using gas chromatography-isotope ratio monitoring-mass spectrometry (GC-irmMS). Results and discussion. Extracts 1 and 2 are characterized by uniform distribution of n-alkanes, whereas extract 3 is characterized by an even-numbered members dominating the odd-ones, and extract 4 showed a bimodal distribution. Extract I is characterized by the least negative delta C-13(PDB) values of C-19-C-26 n-alkanes. Sterane and triterpane analysis confirmed that all extracts originated from the same oil contaminant. n-Fatty acids, C-19-C-24, in all extracts are very low, being somewhat higher in extract 4. Even-numbered n-alcohols, C-12-C-16, were identified in the highest concentration in extract 3. It was assumed that algae were responsible for the composition of extract 3. Furthermore, a possible reason for higher concentrations of C-19-C-26 n-alkanes and C-19-C-24 fatty acids in extract 4 is the formation of inclusion compounds with colloidal micelles formed between the oil contaminant's NSO-compounds and water. Conclusion. It was undoubtedly confirmed that there were specific differences in the compositions of the different extracts depending on the intensity of the interaction between the oil contaminant and the surface water. Recommendation and Outlook. When comparing the composition of oil contaminants from different water samples (regardless of the ultimate investigation goal) it is necessary to compare the extracts isolated under the same conditions, in other words, extracts that were in the same or very similar interaction with water. Recommendation and Outlook. When comparing the composition of oil contaminants from different water samples (regardless of the ultimate investigation goal) it is necessary to compare the extracts isolated under the same conditions, in other words, extracts that were in the same or very similar interaction with water

Внедрение интегрированной системы управления охраной труда и промышленной безопасностью

Poly(vinylpyrrolidone) (PVP) is a widely used and environmentally stable synthetic polymer whose occurrence in wastewater is likely. However, an appropriate method for identification and quantification of this polymer in environmental samples is still lacking. Hence, in this study an analytical method based on continuous-flow off-line pyrolysis-gas chromatography/mass spectrometry (pyrolysis-GC/MS) was developed to identify and quantify PVP in waste and surface water samples. Pyrolysis of commercial PVP, of some personal care products, of spiked water samples as well as of wastewater samples and river water samples was performed in a tube furnace at 500 degrees C under a continuous nitrogen flow. GC/MS was used for identification of specific degradation products, while GC-FID analysis was performed for quantitative determination. The concentration of PVP was calculated on the basis of the main pyrolytic product, N-vinylpyrrolidone (NVP). Very good linear correlation between initial amounts of PVP and released amounts of NVP was obtained and used as external calibration. The detected level of PVP in investigated personal care products was 6.4 (hair gel), 0.8 (laundry detergent) and 1.4%(tablets for throat disinfection). Spiked water samples, wastewater samples and river water samples were pre-extracted with hexane and diethyl ether prior to pyrolysis. It was found that the recovery of spiked samples was 94.6 +/- 1.6% which indicated that pre-extraction did not provoke significant loss of polymer. Finally, application of the developed method on real environmental samples (river water) revealed that PVP was present in effluents from wastewater treatment plants in concentrations between 0.9 mg/L and 7 mg/L, as well as in river water affected by municipal sewage emissions with concentrations around 0.1 mg/L

Prognose der österreichischen Wirtschaft 2013-2014: Jahresmodell LIMA/05 ; Ökonometrisches Forschungsprogramm des Instituts für Höhere Studien

aus dem Inhaltsverzeichnis: Einleitung und Zusammenfassung; Die internationale Konjunktur; Die österreichische Außenwirtschaft; Perspektiven der Inlandskonjunktur; Monetäre Prognose; Tabellenanhang

Zaštitno djelovanje selenija protiv prekomjerne ekspresije apoptotskih gena povezanih s karcinomom u štakora izloženih o-krezolu

Cresols are monomethyl derivatives of phenol frequently used as solvents and intermediates in the production of disinfectants, fragrances, pesticides, dyes, and explosives, which is probably why they are widely distributed in the environment. General population may be exposed to cresols mainly through inhalation of contaminated air. In this study we evaluated the toxicological effects of o-cresol on differential gene expression profile of rat liver and prostate. Experiments were conducted on 80 male rats, 60 of which were exposed to o-cresol (1.5 g kg-1, 5 g kg-1, or 15 g kg-1) through feed for 8 weeks. Three groups of rats were supplemented with 0.1 mg kg-1 selenium (Se, in the form of, sodium selenite) in addition to o-cresol to evaluate its effectiveness against o-cresol toxicity. Control group received neither o-cresol nor Se, while one group received Se alone. Survival was similar between the exposed and control animals. Rats exposed to 15 g kg-1 of o-cresol showed a 16 % loss in body weight by the end of the study, which may have been related to o-cresol making feed unpalatable at this concentration. Liver and prostate tissue samples were collected at the end of the treatment. mRNA analysis revealed that apoptotic genes (CYP3A, COX-2, PPARγ, BAX, BCL2, AKT-1, and PKCα) related to cancer were up-regulated in liver and prostate tissues isolated from groups exposed to 5 g kg-1 and 15 g kg-1 o-cresol in comparison to control. Changes in gene expression profile were prevented when rats were supplemented with Se. The exact mechanisms underlying its protective effect remain to be clarified by future studies.Krezoli su monometilni derivati fenola koji se često rabe kao otapala te kao posrednici u proizvodnji dezinfekcijskih sredstava, mirisa, pesticida, boja i eksploziva. Otuda i njihova rasprostranjenost u okolišu. Opća je populacija izložena krezolima uglavnom putem zraka. U ovome se toksikološkom istraživanju ocijenilo djelovanje o-krezola, jednoga od tri krezolova izomera, na ekspresiju gena u tkivima jetre i prostate mužjaka štakora. Istraživanje je provedeno na 80 mužjaka, od kojih je 60 tijekom osam tjedana bilo izloženo o-krezolu (1,5 g kg-1, 5 g kg-1, odnosno 15 g kg-1) preko krmiva. Tri skupine štakora primale su uz o-krezol nadomjestak selenija u dozi od 0.1 mg kg-1 (Se, u obliku natrijeva selenita) radi ocjene njegove djelotvornosti protiv toksičnosti o-krezola. Kontrolna skupina nije primala ni o-krezol ni Se, dok je jedna skupina primala samo Se. Preživljenje je bilo podjednako u svih skupina životinja. Štakori izloženi najvišoj dozi o-krezola (15 g kg-1) imali su 16 % manju tjelesnu masu od kontrolne skupine na kraju ispitivanja, što može biti povezano s lošim okusom krmiva zbog primjese visoke doze o-krezola. S istekom osmotjednoga izlaganja o-krezolu životinje su eutanazirane te su prikupljeni uzorci tkiva jetre i prostate. Analiza m-RNA pokazala je značajno povišenu ekspresiju apoptotskih gena CYP3A, COX-2, PPARγ, BAX, BCL2, AKT-1 i PKCα, koji su povezani s nastankom karcinoma u skupinama štakora izloženim o-krezolu (5 g kg-1 i 15 g kg-1 u odnosu na kontrolu. Ova je prekomjerna ekspresija poništena u štakora koji su primali selenij. Još nisu jasni mehanizmi iza ovoga zaštitnog djelovanja, na što će odgovoriti buduća istraživanja

Endoplasmic spreading requires coalescence of vimentin intermediate filaments at force-bearing adhesions

10.1091/mbc.E12-05-0377Molecular Biology of the Cell24121-30MBCE

The CS1 segment of fibronectin is involved in human OSCC pathogenesis by mediating OSCC cell spreading, migration, and invasion

<p>Abstract</p> <p>Background</p> <p>The alternatively spliced V region or type III connecting segment III (IIICS) of fibronectin is important in early development, wound healing, and tumorigenesis, however, its role in oral cancer has not been fully investigated. Thus, we investigated the role of CS-1, a key site within the CSIII region of fibronectin, in human oral squamous cell carcinoma (OSCC).</p> <p>Methods</p> <p>To determine the expression of CS-1 in human normal and oral SCC tissue specimens immunohistochemical analyses were performed. The expression of CS1 was then associated with clinicopathological factors. To investigate the role of CS-1 in regulating OSCC cell spreading, migration and invasion, OSCC cells were assayed for spreading and migration in the presence of a CS-1 peptide or a CS-1 blocking peptide, and for invasion using Matrigel supplemented with these peptides. In addition, integrin α4siRNA or a focal adhesion kinase (FAK) anti-sense oligonucleotide was transfected into OSCC cells to examine the mechanistic role of integrin α4 or FAK in CS1-mediated cell spreading and migration, respectively.</p> <p>Results</p> <p>CS-1 expression levels were significantly higher in OSCC tissues compared to normal tissues (p < 0.05). Also, although, high levels of CS-1 expression were present in all OSCC tissue samples, low-grade tumors stained more intensely than high grade tumors. OSCC cell lines also expressed higher levels of CS-1 protein compared to normal human primary oral keratinocytes. There was no significant difference in total fibronectin expression between normal and OSCC tissues and cells. Inclusion of CS-1 in the in vitro assays enhanced OSCC cell spreading, migration and invasion, whereas the CS1 blocking peptide inhibited these processes. Suppression of integrin α4 significantly inhibited the CS1-mediated cell spreading. Furthermore, this migration was mediated by focal adhesion kinase (FAK), since FAK suppression significantly blocked the CS1-induced cell migration.</p> <p>Conclusion</p> <p>These data indicate that the CS-1 site of fibronectin is involved in oral cancer pathogenesis and in regulating OSCC cell spreading, migration and invasion.</p

Tendon Is Covered by a Basement Membrane Epithelium That Is Required for Cell Retention and the Prevention of Adhesion Formation

The ability of tendons to glide smoothly during muscle contraction is impaired after injury by fibrous adhesions that form between the damaged tendon surface and surrounding tissues. To understand how adhesions form we incubated excised tendons in fibrin gels (to mimic the homeostatic environment at the injury site) and assessed cell migration. We noticed cells exiting the tendon from only the cut ends. Furthermore, treatment of the tendon with trypsin resulted in cell extravagation from the shaft of the tendons. Electron microscopy and immunolocalisation studies showed that the tendons are covered by a novel cell layer in which a collagen type IV/laminin basement membrane (BM) overlies a keratinised epithelium. PCR and western blot analyses confirmed the expression of laminin β1 in surface cells, only. To evaluate the cell retentive properties of the BM in vivo we examined the tendons of the Col4a1+/Svc mouse that is heterozygous for a G-to-A transition in the Col4a1 gene that produces a G1064D substitution in the α1(IV) chain of collagen IV. The flexor tendons had a discontinuous BM, developed fibrous adhesions with overlying tissues, and were acellular at sites of adhesion formation. In further experiments, tenotomy of wild-type mice resulted in expression of laminin throughout the adhesion. In conclusion, we show the existence of a novel tendon BM-epithelium that is required to prevent adhesion formation. The Col4a1+/Svc mouse is an effective animal model for studying adhesion formation because of the presence of a structurally-defective collagen type IV-containing BM

Assessment of Blood Hemodynamics by USPIO-Induced R1 Changes in MRI of Murine Colon Carcinoma

The objective of this study is to assess whether ultrasmall superparamagnetic iron oxide (USPIO)-induced changes of the water proton longitudinal relaxation rate (R1) provide a means to assess blood hemodynamics of tumors. Two types of murine colon tumors (C26a and C38) were investigated prior to and following administration of USPIO blood-pool contrast agent with fast R1 measurements. In a subpopulation of mice, R1 was measured following administration of hydralazine, a well-known blood hemodynamic modifier. USPIO-induced R1 increase in C38 tumors (ΔR1 = 0.072 ± 0.0081 s−1) was significantly larger than in C26a tumors (ΔR1 = 0.032 ± 0.0018 s−1, N = 9, t test, P < 0.001). This was in agreement with the immunohistochemical data that showed higher values of relative vascular area (RVA) in C38 tumors than in C26a tumors (RVA = 0.059 ± 0.015 vs. 0.020 ± 0.011; P < 0.05). Following administration of hydralazine, a decrease in R1 value was observed. This was consistent with the vasoconstriction induced by the steal effect mechanism. In conclusion, R1 changes induced by USPIO are sensitive to tumor vascular morphology and to blood hemodynamics. Thus, R1 measurements following USPIO administration can give novel insight into the effects of blood hemodynamic modifiers, non-invasively and with a high temporal resolution