714 research outputs found
Sensitivity of atmospheric rivers to aerosol treatment in regional climate simulations: insights from the AIRA identification algorithm
This study analyzed the sensitivity of atmospheric rivers (ARs) to aerosol treatment in regional climate simulations. Three experiments covering the Iberian Peninsula for the period from 1991 to 2010 were examined: (1) an experiment including prescribed aerosols (BASE); (2) an experiment including direct and semi-direct aerosol effects (ARI); and (3) an experiment including direct, semi-direct, and indirect aerosol effects (ARCI). A new regional-scale AR identification algorithm, AIRA, was developed and used to identify around 250 ARs in each experiment. The results showed that spring and autumn ARs were the most frequent, intense, and long-lasting and that ARs could explain up to 30 % of the total accumulated precipitation. The inclusion of aerosols was found to redistribute precipitation, with increases in the areas of AR occurrence. The analysis of common AR events showed that the differences between simulations were minimal in the most intense cases and that a negative correlation existed between mean direction and mean latitude differences. This implies that more zonal ARs in ARI or ARCI with respect to BASE could also be linked to northward deviations. The joint analysis and classification of dust and sea salt aerosol distributions allowed for the common events to be clustered into eight main aerosol configurations in ARI and ARCI. The sensitivity of ARs to different aerosol treatments was observed to be relevant, inducing spatial deviations and integrated water vapor transport (IVT) magnitude reinforcements/attenuations with respect to the BASE simulation depending on the aerosol configuration. Thus, the correct inclusion of aerosol effects is important for the simulation of AR behavior at both global and regional scales, which is essential for meteorological predictions and climate change projections.</p
Kinetic and functional properties of human mitochondrial phosphoenolpyruvate carboxykinase
The cytosolic form of phosphoenolpyruvate carboxykinase (PCK1) plays a regulatory role in gluconeogenesis and glyceroneogenesis. The role of the mitochondrial isoform (PCK2) remains unclear. We report the partial purification and kinetic and functional characterization of human PCK2. Kinetic properties of the enzyme are very similar to those of the cytosolic enzyme. PCK2 has an absolute requirement for Mn2+ ions for activity; Mg2+ ions reduce the Km for Mn2+ by about 60 fold. Its specificity constant is 100 fold larger for oxaloacetate than for phosphoenolpyruvate suggesting that oxaloacetate phosphorylation is the favored reaction in vivo. The enzyme possesses weak pyruvate kinase-like activity (kcat=2.7 s-1). When overexpressed in HEK293T cells it enhances strongly glucose and lipid production showing that it can play, as the cytosolic isoenzyme, an active role in glyceroneogenesis and gluconeogenesis
On low-frequency variability of the midlatitude ocean gyres
This paper studies the large-scale low-frequency variability of the wind-driven midlatitude ocean gyres and their western boundary currents, such as the Gulf Stream or Kuroshio, simulated with the eddy-resolving quasi-geostrophic model. We applied empirical orthogonal functions analysis to turbulent flow solutions and statistically extracted robust and significant large-scale decadal variability modes concentrated around the eastward jet extension of the western boundary currents. In order to interpret these statistical modes dynamically, we linearized the governing quasi-geostrophic equations around the time-mean circulation and solved for the corresponding full set of linear eigenmodes with their eigenfrequencies. We then projected the extracted decadal variability on the eigenmodes and found that this variability is a multimodal coherent pattern phenomenon rather than a single mode or a combination of several modes as in the flow regimes preceding developed turbulence.The first two authors are thankful to the Natural Environment Research Council for the support of this work through the grant NE/J006602/1 and the use of ARCHER (the UK National Supercomputing Service). We express our gratitude to S. Burbidge and M. Harvey for their help with Imperial College London cluster, as well as to A. Thomas for his help with managing and maintaining the data storage. The last two authors were supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2013-41049-P, and this support is gratefully acknowledged. We would also like to thank unknown referees for valuable comments and suggestions, which helped us to improve the paper.Shevchenko, IV.; Berloff, PS.; Guerrero López, D.; Román Moltó, JE. (2016). On low-frequency variability of the midlatitude ocean gyres. Journal of Fluid Mechanics. 795:423-442. https://doi.org/10.1017/jfm.2016.208S42344279
Magnetic dispersive solid phase microextraction coupled with on-line chemical vapor generation method to extraction/preconcentration of mercury from environmental samples and determination by graphite furnace atomic absorption spectrometry.
Mercury (Hg) is classified as priority hazardous substances. Concentrations found in the aquatic environment are at trace levels as result of natural processes, such as erosion and volcanism, and anthropogenic discharges related mainly to industrial and mining activities. Mercury is one of the most potent neurotoxins known, showing a high number of adverse health effects in animals and humans.
For this reason, a simple and rapid method for the determination and preconcentration of mercury in environmental waters is proposed. This work is based on magnetic dispersive solid phase microextraction (MDSPME) coupled with on-line chemical vapour generation (CVG). Graphite furnace atomic absorption spectrometry (GFAAS) was employed for the quantification of Hg. In the preconcentration step, a shell structured Fe3O4@graphene oxide was suspended in the ionic liquid carrier (1-n-butyl-3-metilimidazolium tetrafluoroborate [BMIM][BF4]), obtaining a stable colloidal suspension called ferrofluid. This sorbent possesses as large contact surface area and a high density of polar groups on its surface. The nanoparticles, when finely dispersed in the sample solution, result in almost complete extraction of Hg within a few seconds. All experimental and instrumental variables were optimized and the method was adequately validated by the analysis of certified reference materials of environmental waters.
Acknowledgements
The authors would like to thank Plan Propio “Proyecto Puente” de la Universidad de Málaga for financial support of this work.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec
Solid sampling determination of ZnO nanoparticles in eyeshadows by graphite furnace atomic absorption spectrometry
The application of nanoparticles (NPs) in science and technology is a fast growing field. Therefore, reliable and straightforward analytical methods are required for their fast determination in different types of samples. In this work, a method that enables the determination of the average size of ZnO NPs, besides their concentration, discriminating them from ionic zinc, has been optimized. The method is based on solid sampling high-resolution continuum source electrothermal atomic absorption spectrometry (SS-HR-CS-GFAAS), and has been applied to determination and characterization of ZnO NPs in cosmetic samples.
Recently, graphite furnace atomic absorption spectrometry has been introduced as a new tool to determine the size of nanoparticles by evaluation of the following parameters: atomization delay (tad) and atomization rate (kat). In this work both parameters (besides peak area) have been obtained from absorbance signals for a line of Zn with low sensitivity. Two multiple response surface designs have been used in order to optimize the adequate furnace program to achieve our aims. All the optimization experiments were performed using baby´s skin irritation protective cream. The optimized furnace program is shown in Table 1.
Table 1. Optimized furnace program
The size calibrations were performed against solid (powered) ZnO standards, from 50-nm to 500-nm sized nanoparticles. The correlation coefficients (R value) of the linear calibration were not worse than 0.9982. The optimized method was tested in other types of cosmetic samples such as eyeshadow samples with good results. The determination of the MNPs’ size was validated by transmission electron microscopy (TEM) and the Zn concentration in the solid samples was validated by atomic fluorescence spectroscopy (AFS).
Acknowledgements (optional) [Garamond font, 10 points]
The authors would like to thank Plan propio “Proyecto Puente” de la Universidad de Málaga for financial support of this work.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec
Rapid magnetic microextraction to preconcentrate and determinate cadmium from environmental samples
A novel and greener ultrasonically assisted/modified cloud point extraction procedure for the preconcentration and extraction of trace cadmium from environmental samples was developed. The sorbent material was fabricated by scattering of magnetic iron nanoparticles (MNPs) over graphene oxide (GO) to obtain magnetic graphene oxide (MGO). The material was suspended in the ionic liquid 1-n-butyl-3-metilimidazolium tetrafluoroborate [BMIM][BF4]. The obtained stable colloidal suspension is named ferrofluid. GO presents excellent adsorbent properties for organic species due to the presence of the electronic π system. For this reason, the organic ligand [1,5-bis-(2-dipyridyl) methylene] thiocarbonohydrazide (DPTH) was used in order to form an organic complex of Cd. Once the DPTH ligand has been added to sample, the ferrofluid was injected and finely dispersed in the sample solution in order to extract the formed chelate as shown in Fig. 1. The complete adsorption of the quelate took place within few seconds, after that the solid was separated from the solution with the aid of a strong magnet. Cadmium ions were desorbed from the material with 1 mL of 5% acid nitric solution and quantified by electrothermal atomic absorption spectrometry (ETAAS).
The main parameters affecting the extraction and the furnace program were optimized using one-at-time method. The analytical performance under optimum conditions are the following: LOD: 0.005 µg/L, LOQ: 0.017 µg/L. Linear calibration: 0-0.25 µg/L and EF: 200. The reliability of the developed procedure was tested by relative standard deviation (% RSD), which was found to be < 5% (1.3%). The performance of the proposed procedure was checked by applying to certified reference material and spiking standard in real samplesUniversidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Influence of the Delta Phase in the Microstructure of the Inconel 718 subjected to “Delta-processing” Heat Treatment and Hot Deformed
AbstractInconel 718 (IN718) is a nickel base alloy widely used in the aerospace industry due to its mechanical stability at elevated temperatures. Stable δ phase with acicular morphology weakens the IN718, however, it has been found that a spherical morphology distributed in the grain boundaries acts as an anchor preventing grain growth during hot deformation. The delta processing (DP718) is a saturation of δ phase in the alloy by thermal treatment followed by thermomechanical working to control the grain growth and morphology during deformation. Two specimens (A and B) of IN718 alloy were solubilized for 1h at 1100°C WQ and aging at 900°C for 24hWQ thermal treatment, following bythermomechanical deformation. Sample A was deformed at 0.001 s -1 and sample Bat 0.01 s-1, both deformations were carried out at 960°C and the final microstructures were characterized by optical microscopy and scanning electron microscopy (SEM) in order to evaluate morphology and grainsize distribution
Comparaciones entre cuatro métodos de estimación de biomasa en praderas de festuca alta
In grazing experiments, forage mass is a necessary measurement for estimating other grassland attributes such as growth, utilization, and decomposition. The predicament is that forage biomass cannot be measured in large scale grazing trials, it can only be estimated through some sampling technique.En los experimentos de pastoreo, la masa de forraje es una medida necesaria para calcular otros atributos de la pradera, como son su crecimiento, utilización, y descomposición. El problema es que esa biomasa no se puede medir en estudios a gran escala, sólo se puede estimar usando algún método de muestreo
EHMTI-0187. A novel ATP1A2 mutation in a case of familial hemiplegic migraine with especially severe attacks
- …