Exploring the receptor origin of vibration-induced reflexes

STUDY DESIGN: An experimental design. OBJECTIVES: The aim of this study was to determine the latencies of vibration-induced reflexes in individuals with and without spinal cord injury (SCI), and to compare these latencies to identify differences in reflex circuitries. SETTING: A tertiary rehabilitation center in Istanbul. METHODS: Seventeen individuals with chronic SCI (SCI group) and 23 participants without SCI (Control group) were included in this study. Latency of tonic vibration reflex (TVR) and whole-body vibration-induced muscular reflex (WBV-IMR) of the left soleus muscle was tested for estimating the reflex origins. The local tendon vibration was applied at six different vibration frequencies (50, 85, 140, 185, 235, and 265 Hz), each lasting for 15 s with 3-s rest intervals. The WBV was applied at six different vibration frequencies (35, 37, 39, 41, 43, and 45 Hz), each lasting for 15 s with 3-s rest intervals. RESULTS: Mean (SD) TVR latency was 39.7 (5.3) ms in the SCI group and 35.9 (2.7) ms in the Control group with a mean (95% CI) difference of -3.8 (-6.7 to -0.9) ms. Mean (SD) WBV-IMR latency was 45.8 (7.4) ms in the SCI group and 43.3 (3.0) ms in the Control group with a mean (95% CI) difference of -2.5 (-6.5 to 1.4) ms. There were significant differences between TVR latency and WBV-IMR latency in both the groups (mean (95% CI) difference; -6.2 (-9.3 to -3.0) ms, p = 0.0001 for the SCI group and -7.4 (-9.3 to -5.6) ms, p = 0.011 for Control group). CONCLUSIONS: The results suggest that the receptor of origin of TVR and WBV-IMR may be different

Blind competition on the numerical simulation of continuous shallow steel‐fiber reinforced concrete beams failing in bending

This article describes the second blind simulation competition (BSC) organized by the fib WG 2.4.1, which aims to assess the predictive performance of models based on the finite element method (FEM) for the analysis and design of fiber reinforced concrete (FRC) structures. Slabs supported on columns or piles have becoming competitive applications for FRC due to the technical and economic benefits may be obtained by combining properly the fiber reinforcement mechanisms to those provided by conventional reinforcement placed, as a strip, in the alignment of columns/piles. Therefore, a representative zone of this structural system, namely a hybrid fiber reinforced concrete (R/FRC) shallow beam, is chosen in this BSC to show the potentialities of FRC in these types of applications, as well as to assess the predictive performance of FEM-based computational models on the design verification at serviceability and at ultimate limit state conditions (SLS and ULS, respectively). Two statically indeterminateshallow beams of two equal spans were tested up to their failure, by recording the applied loads, the strains in the conventional reinforcements and in the FRC of the critical zones of the structure. By using digital image correlation, the average crack width at the level of the flexural reinforcements was recorded. The participants had to predict these results by receiving information about the mechanical properties of the materials, the geometry of the prototypes and their loading and support conditions. In this article, the rules and the results of this 2nd BSC competition are presented, and the data obtained experimentally is thoroughly analyzed.PID2021-125553NB-I00; PTDC/ECI-EST/6300/202

Haidinger’s brushes elicited at varying degrees of polarization rapidly and easily assesses total macular pigmentation

Macular pigments (MPs), by absorbing potentially toxic short-wavelength (400–500 nm) visible light, provide protection against photo-chemical damage thought to be relevant in the pathogenesis of age-related macular degeneration (AMD). A method of screening for low levels of MPs could be part of a prevention strategy for helping people to delay the onset of AMD. We introduce a new method for assessing MP density that takes advantage of the polarization-dependent absorption of blue light by MPs, which results in the entoptic phenomenon called Haidinger’s brushes (HB). Subjects were asked to identify the direction of rotation of HB when presented with a circular stimulus illuminated with an even intensity of polarized white light in which the electric field vector was rotating either clockwise or anti-clockwise. By reducing the degree of polarization of the stimulus light, a threshold for perceiving HB (degree of polarization threshold) was determined and correlated (r2=0.66) to macular pigment optical density assessed using dual-wavelength fundus autofluoresence. The speed and ease of measurement of degree of polarization threshold makes it well suited for large-scale screening of macular pigmentation

Using Weighted Goal Programming Model for Planning Regional Sustainable Development to Optimal Workforce Allocation:An Application for Provinces of Iran

Due to the urbanization and economic growth, planning of regional sustainable development has become one of the major challenges in the world. The key indicators such as gross domestic product (GDP), electricity and energy consumption and greenhouse gas emission (GHG) are considered in sustainable development planning. This paper determines number of required workforce in diferent sectors of each province in Iran considering targets/goals for sustainable development indicators in the 2030 macroeconomic and regional planning. First, the relative goals are designed for GDP, electricity, energy and GHG emission and then, two weighted goal programming models are applied to allocate the optimal workforce among four sectors: agriculture, industry, services and transportation. The frst model minimizes recruitment of new workforce and allows current workforce exchange among the four sectors in each province in order to achieve the goals, while the second model indicates equitable distribution of new workforce recruitment in diferent sectors within each province. In both models, the workforce changes have been investigated based on achieving the desirable growth rates of GDP, GHG, electricity and energy consumption as planned by the government. Based on the results of this paper, policy makers can manage workforce and the government can make optimized decisions to macroeconomic and regional planning

Stereotaxical Infusion of Rotenone: A Reliable Rodent Model for Parkinson's Disease

A clinically-related animal model of Parkinson's disease (PD) may enable the elucidation of the etiology of the disease and assist the development of medications. However, none of the current neurotoxin-based models recapitulates the main clinical features of the disease or the pathological hallmarks, such as dopamine (DA) neuron specificity of degeneration and Lewy body formation, which limits the use of these models in PD research. To overcome these limitations, we developed a rat model by stereotaxically (ST) infusing small doses of the mitochondrial complex-I inhibitor, rotenone, into two brain sites: the right ventral tegmental area and the substantia nigra. Four weeks after ST rotenone administration, tyrosine hydroxylase (TH) immunoreactivity in the infusion side decreased by 43.7%, in contrast to a 75.8% decrease observed in rats treated systemically with rotenone (SYS). The rotenone infusion also reduced the DA content, the glutathione and superoxide dismutase activities, and induced alpha-synuclein expression, when compared to the contralateral side. This ST model displays neither peripheral toxicity or mortality and has a high success rate. This rotenone-based ST model thus recapitulates the slow and specific loss of DA neurons and better mimics the clinical features of idiopathic PD, representing a reliable and more clinically-related model for PD research

Razvoj i in vitro vrednovanje puferiranog bioadhezivnog vaginalnog gela za miješane vaginalne infekcije

An acid buffering bioadhesive vaginal (ABBV) gel was developed for the treatment of mixed vaginal infections. Different bioadhesive polymers were evaluated on the basis of their bioadhesive strength, stability and drug release properties. Bioadhesion and release studies showed that guar gum, xanthan gum and hydroxypropylmethylcellulose K4M formed a good combination of bioadhesive polymers to develop the ABBV gel. Mono sodium citrate was used as an acid buffering agent to provide acidic pH (4.4). The drugs clotrimazole (antifungal) and metronidazole (antiprotozoal as well as antibacterial) were used in the formulation along with Lactobacillus spores to treat mixed vaginal infections. The ex vivo retention study showed that the bioadhesive polymers hold the gel for 12-13 hours inside the vaginal tube. Results of the in vitro antimicrobial study indicated that the ABBV gel had better antimicrobial action than the commercial intravaginal drug delivery systems and retention was prolonged in an ex vivo retention experiment.U radu je opisan razvoj puferiranog biodhezivnog vaginalnog (acid buffering bioadhesive vaginal, ABBV) gela za terapiju miješanih vaginalnih infekcija. Ispitani su različiti bioadhezivni polimeri procijenjena su njihova bioadhezivna svojstva, stabilnost i sposobnost oslobađanja ljekovite tvari. Guar guma, ksantan guma i hidroksipropilmetilceluloza K4M tvore dobru kombinaciju za ABBV gel. Mono natrijev citrat upotrebljen je kao puferirajuća tvar koja omogućava blago kiseli pH (4,4), a kao ljekovite tvari upotrebljeni su klotrimazol (antimikotik) i metronidazol (antiprotozoik i antibakterijsko sredstvo), zajedno sa sporama Lactobacillus. Pripravci su upotrebljeni u terapiji miješanih vaginalnih infekcija. Pokusi ex vivo pokazali su da se bioadhezivni gel zadržava u vagini 12-13 sati. Rezultati in vitro ispitivanja ukazuju na to da ABBV gel ima bolje antibakterijsko djelovanje i dulje zadržavanje od intravaginalnog sustava koji je dostupan na tržištu

Measuring quality of life in Duchenne muscular dystrophy : a systematic review of the content and structural validity of commonly used instruments

Duchenne muscular dystrophy (DMD) is an inherited X-linked neuromuscular disorder. A number of questionnaires are available to assess quality of life in DMD, but there are concerns about their validity. This systematic review aimed to appraise critically the content and structural validity of quality of life instruments for DMD. Five databases (EMBASE, MEDLINE, CINAHL, PsycINFO, and Cochrane Library) were searched, with supplementary searches in Google Scholar. We included articles with evidence on the content and/or structural validity of quality of life instruments in DMD, and/or instrument development. Evidence was evaluated against the Consensus-based Standards for the selection of health Measurement INstruments (COSMIN) criteria. Fifty five articles featured a questionnaire assessing quality of life in DMD. Forty instruments were extracted and 26 underwent assessment. Forty-one articles contained evidence on content or structural validity (including 37 development papers). Most instruments demonstrated low quality evidence and unsatisfactory or inconsistent validity in DMD, with the majority not featuring direct validation studies in this population. Only KIDSCREEN received an adequate rating for instrument design and a satisfactory result for content validity based on its development, yet, like the majority of PROMs, the measure has not been directly validated for use in DMD. Further research is needed on the validity of quality of life instruments in DMD, including content and structural validity studies in this population