Laissez-Faire Versus Pareto

Consider two principles for social evaluation. The first, ‘laissez-faire’, says that mean-preserving redistribution away from laissez-faire incomes should be regarded as a social worsening. This principle captures a key aspect of liberal political philosophy. The second, weak Pareto, states that an increase in each individual’s disposable income should be regarded as a social improvement. We show that the combination of the two principles implies that total disposable income ought be maximized. Strikingly, the relationship between disposable incomes and laissez-faire incomes must therefore be ignored, leaving little room for liberal values

The Novel Control Loops of the Pulsed Power Converters for the CERN SPS Machine

The topic of this paper is the studies that were made in the framework of the renovation project of the CERN SPS accelerator's power converters. This project was initiated because these converters were designed 20 years ago and they will need to work another 20 years, due to the use of the SPS machine as the LHC injector

Microwave-induced nonequilibrium temperature in a suspended carbon nanotube

Antenna-coupled suspended single carbon nanotubes exposed to 108 GHz microwave radiation are shown to be selectively heated with respect to their metal contacts. This leads to an increase in the conductance as well as to the development of a power-dependent DC voltage. The increased conductance stems from the temperature dependence of tunneling into a one-dimensional electron system. The DC voltage is interpreted as a thermovoltage, due to the increased temperature of the electron liquid compared to the equilibrium temperature in the leads

Discrete Cutting Force Model for 5-Axis Milling with Arbitrary Engagement and Feed Direction

5-axis machining operations bring new challenges for predicting cutting forces. Complex tool workpiece engagements and tool orientations make it difficult to adapt 3-axis process models for 5-axis operations. A new model is developed to predict cutting forces with arbitrary tool/workpiece engagement and tool feed direction. A discretization approach is used, in which the tool is composed of multiple cutting elements. Each element is processed to determine its effect on cutting forces, and global forces are determined by combining the elemental effects. Cutting tests are conducted to verify force predictions, where the tool/workpiece engagement is provided through a geometric software application

Expanded Bodipy Dyes: Anion Sensing Using a Bodipy Analog with an Additional Difluoroboron Bridge

Cataloged from PDF version of article.Oxalyl-tethered pyrroles can be doubly bridged with two difluoroboron chelating units to yield bright orange dyes. Interestingly, in polar organic solvents, the addition of fluoride and cyanide result in reversible detachment of the otherwise stable difluoroboron bridges, resulting in sharp changes in color. Thus, this novel compound behaves as a highly selective chromogenic sensor for fluoride and cyanide ions

Effect of Reynolds Number and Periodic Unsteady Wake Flow Condition on Boundary Layer Development, Separation, and Re-attachment along the Suction Surface of a Low Pressure Turbine Blade

The paper experimentally studies the effects of periodic unsteady wake flow and different Reynolds numbers on boundary layer development, separation and re-attachment along the suction surface of a low pressure turbine blade. The experimental investigations were performed on a large scale, subsonic unsteady turbine cascade research facility at Turbomachinery Performance and Flow Research Laboratory (TPFL) of Texas A&M University. The experiments were carried out at Reynolds numbers of 110,000 and 150,000 (based on suction surface length and exit velocity). One steady and two different unsteady inlet flow conditions with the corresponding passing frequencies, wake velocities, and turbulence intensities were investigated. The reduced frequencies chosen cover the operating range of LP turbines. In addition to the unsteady boundary layer measurements, surface pressure measurements were performed. The inception, onset, and the extent of the separation bubble information collected from the pressure measurements were compared with the hot wire measurements. The results presented in ensemble-averaged, and the contour plot forms help to understand the physics of the separation phenomenon under periodic unsteady wake flow and different Reynolds number. It was found that the suction surface displayed a strong separation bubble for these three different reduced frequencies. For each condition, the locations defining the separation bubble were determined carefully analyzing and examining the pressure and mean velocity profile data. The location of the boundary layer separation was dependent of the Reynolds number. It is observed that starting point of the separation bubble and the re-attachment point move further downstream by increasing Reynolds number from 110,000 to 150,000. Also, the size of the separation bubble is smaller when compared to that for Re=110,000

Strain analysis of the GaN epitaxial layers grown on nitridated Si(111) substrate by metal organic chemical vapor deposition

Cataloged from PDF version of article.The strain analysis of GaN film on nitridated Si(111) substrate with different growth times between 0 and 660 s via metal organic chemical vapor deposition (MOCVD) was conducted based on the precise measurement of the lattice parameters by using high-resolution X-ray diffraction (HR-XRD). The nitridation time (NT) was changed at a fixed growth condition. The a- and c-lattice parameters were measured, followed by the in-plane and out-of-plane strains. Then, the biaxial and hydrostatic components were extracted from the total strain values obtained, and were then discussed in the present study as functions of the NT. The biaxial strain and stress are also strongly affected by the non-uniformity of the SiNx buffer layer thickness. Published by Elsevier Ltd

Robust Cassie State of Wetting in Transparent Superhydrophobic Coatings

Cataloged from PDF version of article.This paper investigates the stability of the Cassie state of wetting in transparent superhydrophobic coatings by comparing a single-layer microporous coating with a double-layer micro/nanoporous coating. Increasing pressure resistance of superhydrophobic coatings is of interest for practical use because high external pressures may be exerted on surfaces during operation. The Cassie state stability against the external pressure of coatings was investigated by squeezing droplets sitting on surfaces with a hydrophobic plate. Droplets on the single-layer coating transformed to the Wenzel state and pinned to the surface after squeezing, whereas droplets on the double-layer micro/nanoporous coating preserved the Cassie state and rolled off the surface easily. In addition, the contact angle and contact-line diameter of water droplets during evaporation from surfaces were in situ investigated to further understand the stability of coatings against Wenzel transition. A droplet on a microporous coating gradually transformed to the Wenzel state and lost its spherical shape as the droplet volume decreased (i.e., the internal pressure of the droplet increased). The contact line of the droplet during evaporation remained almost unchanged. In contrast, a water droplet on a double-layer surface preserved its spherical shape even at the last stages of the evaporation process, where pressure differences as high as a few thousand pascals were generated. For this case, the droplet contact line retracted during evaporation and the droplet recovered the initial water contact angle. The demonstrated method for the preparation of robust transparent superhydrophobic coatings is promising for outdoor applications such as self-cleaning cover glasses for solar cells and nonwetting windows