Rupture of the meniscofibular ligament

The meniscofibular ligament is an anatomically defined ligament of the knee in humans. However, there are no data regarding the prognosis following injury to this ligament. Our case was a 42-year-old man who presented at our clinic with pain of the lateral side of his left knee. MRI of his left knee revealed the rupture of the meniscofibular ligament. The mechanism of injury was consistent with anatomical and mechanical studies of the meniscofibular ligament. The patient was treated conservatively for 1 year, but his pain did not resolve completely. A case series of patients with the same injury is required to establish an effective treatment for this rare injury

Evaluation of face shape in Turkish individuals

The aim of this study was to determine the types of face shape in the Turkish population. Knowledge on face shape is important in anthropology and for planning medical procedures such as in aesthetic, maxillofacial and orthodontic surgery. The study group consisted of 1003 healthy subjects (470 male, 533 female) aged 18–68 years. Mean height, weight and body mass index (BMI) were 1.74 m, 78.65 Kg, 25.80±3.50 kg/m2 and 1.62 m, 60.55 kg, 22.87±3.49 kg/m2 in males and females, respectively. Face length (FL; the distance from nasion to gnathion) and face width (FW; bizygomatic breadth) were measured, from which a Prosopic Index (PI) was determined using the following formula: (PI= FL/FW x 100). The types of face shape were classified according to Banister’s classification Type I (hypereuryprosopic), Type II (euryprosopic), Type III (mesoprosopic), Type IV (leptoprosopic), Type V (hyperleptoprosopic) in both males and females. PI was 84.31 (FL: 12.07 cm; FW: 14.34 cm) in males and 85.25 (FL: 11.30 cm; FW: 13.28 cm) in females. In males and females Type I face shape was observed in 18.1 % and 15.6 %; Type II in 35.3 % and 34.3 %; Type III in 33.2 % and 34.3 %; Type IV in 8.7 % and 11.8 %; and Type V in 4.7 % and 3.9 %, respectively. The determination of types of face shape as presented in this study may be useful for aesthetic surgical procedures as well as medical and anthropological investigations.</p

Examination of microvascular structures of midcortical region in sheep kidneys: a three dimensional approach.

Polyester-crystic cast was observed to reach the peritubular capillary plexus following injection in sheep kidneys. Microvascular structures in this region are also reported in this study. Glomeruli were found to vary in size and shape. Diameters of afferent arterioles were larger than those of efferent arterioles. The glomerulus is supplied by more than one afferent arteriole, and in some regions, the blood in afferent arterioles joins collateral circulation via the intercapillary plexus. Morphological properties at the end of the peritubular capillary plexus were found to be remarkably significant.&#60;/P&#62;</p

Assessment of Scapular Morphometry

WOS: 000454335600026The current study was undertaken to assess the incidence of different types of suprascapular notch, acromion dimensions and the lower and upper scapular angles. The suprascapular notch and variations of the acromion are clinically important in suprascapular nerve compression and subacromial impingement. Measurements were taken from 73 Anatolian dry scapulae of unknown age or sex. The suprascapuar notch was classified according to that of Rengachary et al. (1979). Its width and depth, the distance between supraglenoid tubercle and the deepest point of notch, as well as the upper and lower scapular angles were also determine measured. The type of acromion was assessed according to shape (type I (cobra), type II (square), type III (intermediate)) and tilt (type I (flat), type II (curve). Acromion length and the distance between acromion and coracoid process were also measured. The frequency of different types of suprascapular notch were type I (28.8 %), type II (23.3 %), type III (13.7 %), type IV (20.5 %), type V (2.7 %), type VI (5.5 %)and absence (5.5 %). Acromion type were type I (45.5 %), type II (7.5 %) and type III (47.0 %), acromion tilt type I (15.2 %), and type II (84.8 %). An understanding of the association between the anatomical structures of the scapula and morphometric measurements is clinically important

Anatomy and clinical importance of the extracranial clivus and surrounding structures

The aim of this study was to reveal the clinical importance of measurements taken from the pharyngeal tubercle (PT) to various anatomical structures around the extracranial clivus. Twenty-six adult dry Anatolian skulls were examined. The extracranial clivus and PT were used as landmarks from which various distances were measured using a digital caliper accurate to 0.01 mm. The following mean distances from the PT were observed; foramen lacerum (FL) (L: 17.15 mm, R: 17.4 mm); medial external margin of the carotid canal (CC) (L: 26.7 mm, R: 27.5 mm); anterior tip of occipital condyle (OC) (L: 16.4 mm, R: 16.3 mm); anterior margin of foramen magnum (FM) (10.8 mm); foramen ovale (FO) (L: 25.9 mm, R: 29.1); medial margin of the jugular fossa (JF) (L: 25.4 mm, R: 25.7 mm); medial external margin of the hypoglossal canal (HC) (L: 20.0 mm, R: 19.9 mm). Mean bilateral distances were: LFO-RFO: 45.34 mm; LFL-RFL: 20.1 mm; LCC-RCC: 52.1 mm; LOC-ROC: 17.6 mm; LJF-RJF: 45.2 mm; LHC-RHC: 33.5 mm. The following mean distances were observed from the FM: FM-OC (L: 8.3 mm, R: 9.3 mm); FM-HC (L: 17.8 mm, R: 17.4 mm). Also the mean distance of OC-HC were observed (L: 11.7 mm, R: 11.4 mm). Present measurements suggest that the PT can be used as an anatomical landmark during surgery involving clival pathology. However, the anatomy and variations of the extracranial clivus and surrounding structures must be taken into consideration.</p

Management Style at Turkish SMEs

Republic of Turkey is one of those countries where SMEs are flourishing and acting as a driving force of development. In this paper, we explore management style at Turkish SMEs. Being an intersection of eastern and western cultures and with the recent liberalization of domestic markets, we believe this exploration can lead to interesting results. In this paper authors take a glance at Turkish SMEs. We investigate the management style at Turkish SMEs. We have gathered data from 421 SMEs located in Republic of Turkey, using a previously developed questionnaire. This study is an exploratory one and no hypothesis is configured. There are significant results regarding management style of Turkish SMEs. Individuals are more likely to work within a group and formal organizational structures and management policies are implemented as SMEs grow larger. 

Rapid fixation of whole organ specimens and attendant problems.

Gross specimens are valuable sources in morphology education. In this study, we investigated how the fixation of gross specimens may be accelerated. For this purpose, whole organ specimens from freshly killed rabbits: extremities, kidney, heart, liver, stomach and uterus were fixed in a mercaptoethanol-formaldehyde mixture for 3-3.5h under the following conditions: 1, at room temperature; 2, at gradually increasing temperatures up to 45 degrees C; and 3, at a gradually increasing vacuum ranging from 20 kPa to 40 kPa. The results were compared with those of formaldehyde-fixed controls, and the mercaptoethanol-formaldehyde mixture was found to be useful in shortening the fixation time and providing good fixation. Both heat and vacuum enhanced these phenomena.</p

Study on Parallel Computation and Load Balance Strategy Based on Multiblock Structured Grid

从并行计算流体力学程序的稳定性和效率两大问题入手,针对多块结构网格的通用数据传输方法和基于遗传优化算法的负载平衡方法,并在已有串行多块结构网格程序基础上发展了相应的并行程序。该并行程序以物理区域分割为基础,采用MPI实现消息传递,适用于各种不同的并行机体系结构,具有很好的可移植性。大量数值实验证明,本文发展的并行程序具有良好的稳定性和并行效率,可以进一步应用于大规模实际工程计算

Working Document: Towards a vision for research, technology and innovation cooperation between Russia and the EU, its Member States and Associated States

This Working Document outlines development perspectives for cooperation in research, technology and innovation (RTI) between the EU, its Member States (MS), countries associated to the EU’s FP7 (AC), and Russia. The Working Document has been prepared in the framework of the ERA.Net RUS project and is based on a comprehensive foresight exercise implemented over the years 2010-2013 and on analysis of ongoing RTI cooperation. In-depth discussions among the ERA.Net RUS and ERA.Net RUS Plus consortiums and Funding Parties, and in the frame of expert workshops with policy makers and analysts provided essential input. Furthermore, results of other related projects (such as BILAT-RUS, BILAT-RUS Advanced, ACCESSRU, etc.) have been studied. The paper proposes a vision on enhancing the cooperation between EU MS/AC and Russia overall, as well as a specific follow-up vision for the ERA.Net RUS and ERA.Net RUS Plus projects.JRC.J.2-Knowledge for Growt