46 research outputs found

    Phytomanagement of Pb/Zn/Cu Tailings using Biosolids-Biochar or -Humus Combinations: Enhancement of Bioenergy Crop Production, Substrate Functionality, and Ecosystem Services

    No full text
    The extreme characteristics of mine tailings generally prohibit microbial processes and natural plant growth. Consequently, vast and numerous tailings sites remain barren for decades and highly susceptible to windblown dust and water erosion. Amendment-assisted phytostabilization is a cost-effective and ecologically productive approach to mitigate the potential transport of residual metals. Due to the contrasting and complementary characteristics of biosolids (BS) and biochar (BC), co-application might be more efficient than individually applied. Studies considering BS and BC co-application for multi-metal tailings revegetation are scarce. As tailings revegetation is a multidimensional issue, clearly notable demand exists for a study that provides a comprehensive understanding on the co-application impact on interrelated properties of physicochemical, biological, mineral nitrogen availability, metal immobilization, water-soil interactions, and impacts on plant cultivation and biomass production. This 8-month greenhouse study aimed at investigating the efficacy of co-application strategies targeting BS and carbon-rich amendments (BC or humic substances (HS)) to phytomanage a slightly alkaline Pb/Zn/Cu tailings with bioenergy crops (poplar, willow, and miscanthus). A complementary assessment linking revegetation effectiveness to ecosystem services (ES) provision was also included. Owing to their rich nutrient and organic matter contents, BS had the most pronounced influence on most of the measured properties including physicochemical, enzyme activities, NH4+-N and NO3−-N availability, immobilization of Zn, Cu, and Cd, and biomass production. Co-applying with BC exhibited efficient nutrient release and was more effective than BS alone in reducing metal bioavailability and uptake particularly Pb. Poplar and willow exhibited more superior phytostabilization efficiency compared to miscanthus which caused acidification-induced metal mobilization, yet BC and BS co-application was effective in ameliorating this effect. Enhancement of ES and substrate quality index mirrored the positive effect of amendment co-application and plant cultivation. Co-applying HS with BS resulted in improved nutrient cycling while BC enhanced water purification and contamination control services

    Amendment-Assisted Revegetation of Mine Tailings: Improvement of Tailings Quality and Biomass Production

    No full text
    Mining activities have left a legacy of metals containing tailings impoundments. After mine closure, reclamation of mine wastes can be achieved by restoration of a vegetation cover. This study investigated the impact of biochar (BC), biosolids (BS), humic substances (HS), and mycorrhizal fungi (MF) for improving mine tailings fertility and hydraulic properties, supporting plant establishment, tailings revegetation, and enabling growth of energy crops. We conducted a pot trial by growing willow, poplar, and miscanthus in Pb/Zn/Cu mine tailings untreated or amended with two rates of amendments (low or high input). Biosolids resulted in the most significant changes in tailings properties, neutralizing pH and increasing organic carbon, nutrient concentrations, cation exchange capacity, water retention, and saturated hydraulic conductivity. The greatest increase in energy crops production was also observed in BS treatments enabling the financial viability of mine reclamation. Although BC resulted in significant improvements in tailings fertility and hydraulic properties, its impact on biomass was less pronounced, most likely due to lower N and P available concentrations. Increases in willow and miscanthus biomass were observed in HS and MF treatments in spite of their lower nutrient content. A pot experiment is underway to assess synergistic effects of combining BS with BC, HS, or MF

    Phytomanagement of Pb/Zn/Cu Tailings using Biosolids-Biochar or -Humus Combinations: Enhancement of Bioenergy Crop Production, Substrate Functionality, and Ecosystem Services

    No full text
    The extreme characteristics of mine tailings generally prohibit microbial processes and natural plant growth. Consequently, vast and numerous tailings sites remain barren for decades and highly susceptible to windblown dust and water erosion. Amendment-assisted phytostabilization is a cost-effective and ecologically productive approach to mitigate the potential transport of residual metals. Due to the contrasting and complementary characteristics of biosolids (BS) and biochar (BC), co-application might be more efficient than individually applied. Studies considering BS and BC co-application for multi-metal tailings revegetation are scarce. As tailings revegetation is a multidimensional issue, clearly notable demand exists for a study that provides a comprehensive understanding on the co-application impact on interrelated properties of physicochemical, biological, mineral nitrogen availability, metal immobilization, water-soil interactions, and impacts on plant cultivation and biomass production. This 8-month greenhouse study aimed at investigating the efficacy of co-application strategies targeting BS and carbon-rich amendments (BC or humic substances (HS)) to phytomanage a slightly alkaline Pb/Zn/Cu tailings with bioenergy crops (poplar, willow, and miscanthus). A complementary assessment linking revegetation effectiveness to ecosystem services (ES) provision was also included. Owing to their rich nutrient and organic matter contents, BS had the most pronounced influence on most of the measured properties including physicochemical, enzyme activities, NH4+-N and NO3−-N availability, immobilization of Zn, Cu, and Cd, and biomass production. Co-applying with BC exhibited efficient nutrient release and was more effective than BS alone in reducing metal bioavailability and uptake particularly Pb. Poplar and willow exhibited more superior phytostabilization efficiency compared to miscanthus which caused acidification-induced metal mobilization, yet BC and BS co-application was effective in ameliorating this effect. Enhancement of ES and substrate quality index mirrored the positive effect of amendment co-application and plant cultivation. Co-applying HS with BS resulted in improved nutrient cycling while BC enhanced water purification and contamination control services

    High throughput Screening of Native Species for Tailings Eco-Restoration using Novel Computer Visualization for Plant Phenotyping

    No full text
    Historical hard-rock mine activities have resulted in nearly half a million mining-impacted sites scattered around the US. Compared to conventional remediation, (aided) phytostabilization is generally cost-effective and ecologically productive approach, particularly for large-scale sites. Native species act to maintain higher local biodiversity, providing a foundation for natural ecological succession. Due to heterogeneity of mine waste, revegetation strategies are inconsistent in approach, and to avoid failure scenarios, greenhouse screening studies can identify candidate plants and amendment strategies before scaling up. This greenhouse study aimed to concurrently screen a variety of native species for their potential to revegetate Cu/Pb/Zn mine tailings and develop a high throughput and non-destructive approach utilizing computer vision and image-based phenotyping technologies to quantify plant responses. A total number of 34 species were screened in this study, which included: 5 trees, 8 grasses, and 21 forbs and legumes. Most of the species tested were Missouri native and prairie species. Plants were non-destructively imaged, and 15 shape and color phenotypic attributes were extracted utilizing computer vision techniques of PlantCV. Compared to reference soil, all species tested were negatively impacted by the tailings\u27 characteristics, with lowest tolerance generally observed in tree species. However, significant improvement in plant growth and tolerance generally observed with biosolids addition with biomass surpassing reference soil for most legumes. Accumulation of Cu, Pb, and Zn was below Domestic Animal Toxicity Limits in most species. Statistically robust differences in species responses were observed using phenotypic data, such as area, height, width, color, and 9 other morphological attributes. Correlations with destructive data indicated that area displayed the greatest positive correlation with biomass and color the greatest negative correlation with shoot metals. Computer visualization greatly increased the phenotypic data and offers a breakthrough in rapid, high throughput data collection to project site-specific phytostabilization strategies to efficiently restore mine-impacted sites

    Aided phytostabilization of a trace element-contaminated technosol developed on steel mill wastes

    No full text
    Aided phytostabilization of a barren, alkaline metal(loid)-contaminated technosol developed on steel mill wastes, with high soluble Cr and Mo concentrations, was assessed in a pot experiment using (1) Ni/Cd-tolerant populations of Festuca pratensis Huds. , Holcus lanatus L. , and Plantago lanceolata L. sowed in mixed stand and (2) six soil treatments: untreated soil (UNT), ramial chipped wood (RCW, 500 m3ha−1), composted sewage sludge (CSS, 120 t DW ha−1), UNT soil amended with compost (5% w/w) and either vermiculite (5%, VOM) or iron grit (1%, OMZ), and an uncontaminated soil (CTRL). In the CSS soil, pH and soluble Cr decreased whereas soluble Cu, K, Fe, Mn, Mg, Ni and P increased. The RCW treatment enhanced soluble Fe, Mn, and Mg concentrations. After 15 weeks, shoot DW yield and shoot Cd, Cu, Fe, Mn, Mo, Zn, and Mg removals peaked for F. pratensis grown on the CSS soil, with lowest shoot Cr, Ni and Mo concentrations. Holcus lanatus only grew on the CTRL, UNT, and CSS soils and P. lanceolata on the CTRL soil. Best treatment, F. pratensis grown on the CSS soil, led to a dense grass cover but its shoot Mo concentration exceeded the maximum permitted concentration in forage

    Influence of biochars, compost and iron grit, alone and in combination, on copper solubility and phytotoxicity in a Cu-contaminated soil from a wood preservation site

    No full text
    International audienceTwo biochars, a green waste compost and iron grit were used, alone and in combination, as amendment to improvesoil properties and in situ stabilize Cu in a contaminated soil (964 mg Cu kg−1) from a wood preservationsite. The pot experiment consisted in 9 soil treatments (% w/w): untreated Cu-contaminated soil (Unt); Unt soilamended respectively with compost (5%, C), iron grit (1%, Z), pine bark-derived biochar (1%, PB), poultry-manure-derived biochar (1%, AB), PB or AB + C (5%, PBC and ABC), and PB or AB + Z (1%, PBZ and ABZ). After a3-month reaction period, the soil pore water (SPW) was sampled in potted soils and dwarf beans were grownfor a 2-week period. In the SPW, all amendments decreased the Cu2+ concentration, but total Cu concentrationincreased in all AB-amended soils due to high dissolved organic matter (DOM) concentration. No treatment improvedroot and shoot DWyields, which even decreased in the ABC and ABZ treatments. The PBZ treatment decreasedtotal Cu concentration in the SPWwhile reducing the gap with common values for root and shoot yieldsof dwarf bean plants. A field trial is underway before any recommendation for the PB-based treatments

    Field assessment of organic amendments and spring barley to phytomanage a Cu/PAH-contaminated soil

    No full text
    The INTENSE project, supported by the EU Era-Net Facce Surplus, aimed at increasing crop production on marginal land, including those with contaminated soils. A field trial was set up at a former wood preservation site to phytomanage a Cu/PAH-contaminated sandy soil. The novelty was to assess the influence of five organic amendments differing in their composition and production process, i.e. solid fractions before and after biodigestion of pig manure, compost and compost pellets (produced from spent mushroom substrate, biogas digestate and straw), and greenwaste compost, on Cu availability, soil properties, nutrient supply, and plant growth. Organic amendments were incorporated into the soil at 2.3% and 5% soil w/w. Total soil Cu varied from 179 to 1520 mg kg−1, and 1 M NH4NO3-extractable soil Cu ranged from 4.7 to 104 mg kg−1 across the 25 plots. Spring barley (Hordeum vulgare cv. Ella) was cultivated in plots. Changes in physico-chemical soil properties, shoot DW yield, shoot ionome, and shoot Cu uptake depending on extractable soil Cu and the soil treatments are reported. Shoot Cu concentration varied from 45 ± 24 to 140 ± 193 mg kg DW−1 and generally increased with extractable soil Cu. Shoot DW yield, shoot Cu concentration, and shoot Cu uptake of barley plants did not significantly differ across the soil treatments in year 1. Based on soil and plant parameters, the effects of the compost and pig manure treatments were globally discriminated from those of the untreated, greenwaste compost and digested pig manure treatments. Compost and its pellets at the 5% addition rate promoted soil functions related to primary production, water purification, and soil fertility, and the soil quality index

    Investigating Plant Uptake of Organic Contaminants through Transpiration Stream Concentration Factor and Neural Network Models

    No full text
    Uptake of seven organic contaminants including bisphenol A, estriol, 2,4-dinitrotoluene, N,N-diethyl-meta-toluamide (DEET), carbamazepine, acetaminophen, and lincomycin by tomato (Solanum lycopersicum L.), corn (Zea mays L.), and wheat (Triticum aestivum L.) was measured. The plants were grown in a growth chamber under recommended conditions and dosed by these chemicals for 19 days. The plant samples (stem transpiration stream) and solution in the exposure media were taken to measure transpiration stream concentration factor (TSCF). The plant samples were analyzed by a freeze-thaw centrifugation technique followed by high performance liquid chromatography-tandem mass spectrometry detection. Measured average TSCF values were used to test a neural network (NN) model previously developed for predicting plant uptake based on physicochemical properties. The results indicated that moderately hydrophobic compounds including carbamazepine and lincomycin have average TSCF values of 0.43 and 0.79, respectively. The average uptake of DEET, estriol, acetaminophen, and bisphenol A was also measured as 0.34, 0.29, 0.22, and 0.1, respectively. The 2,4-dinitrotoluene was not detected in the stem transpiration stream and it was shown to degrade in the root zone. Based on these results together with plant physiology measurements, we concluded that physicochemical properties of the chemicals did predict uptake, however, the role of other factors should be considered in the prediction of TSCF. While NN model could predict TSCF based on physicochemical properties with acceptable accuracies (mean squared error less than 0.25), the results for 2,4-dinitrotoluene and other compounds confirm the needs for considering other parameters related to both chemicals (stability) and plant species (role of lipids, lignin, and cellulose)

    Assessing Plant Uptake of Organic Contaminants by Food Crops Tomato, Wheat, and Corn through Sap Concentration Factor

    No full text
    This study investigated uptake of two organic compounds including hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and exogenous caffeine by tomato (Solanum lycopersicum L.), corn (Zea mays L.), and wheat (Triticum aestivum L.). The plants were grown in a growth chamber under recommended conditions and then were exposed to these compounds for 19 days. The uptake of the compounds was measured by sap concentration factor. The plant samples (stem transpiration stream) and solution in the exposure media were taken and analyzed by high performance liquid chromatography-tandem mass spectrometry. The plant stem samples were analyzed after a freeze-thaw centrifugation process. The average sap concentration factor for the RDX by tomato, wheat, and corn was 0.71, 0.67, and 0.65. The average sap concentration factor for the exogenous caffeine by tomato, wheat, and corn was 0.72, 0.50, and 0.34. These relatively high sap concentration factor values were expected as available predictive models offer high sap concentration factor values for moderately hydrophobic and hydrophilic compounds. The generated sap concentration factor values for the RDX and exogenous caffeine are important for improving the accuracy of previously developed machine learning models predicting the uptake and translocation of emerging contaminants

    Developing eco-innovative chemical processes to valorise phytoremediation-borne biomasses : the PHYTOCHEM initiative

    No full text
    Industrial and urban activities impact our environment, especially in terms of soil pollution. During the last two decades, gentle soil remediation techniques have emerged using various plant species and the combination of microbial biotechnologies. Several phytotechnologies can be applied to produce useable biomass, alleviate pollutant linkages and restore services of polluted soils: (1) phytostabilisation, which uses perennials able to sorb and immobilize trace elements (TE) in excess in the root zone, avoiding their transfer toward groundwater and aerial parts and preventing their bioaccumulation in the food chain as well as dispersion by natural agents (2) phytoextraction, based on root-to-shoot transfer and storage of TE in harvestable plant parts. The PHYTOCHEM project aims at promoting chemically-based valorisation processes of the plant biomasses collected from polluted sites managed by eco-innovative phytotechnologies. As a first step towards the development of chemically-based valorisation processes of plant biomasses collected from polluted sites, we have successfully implemented 16 and 18 woody species at two phytomanagement sites in 2014 (Figure 1). Based on ICP-AES analysis, TE concentrations in aboveground tissues highly varied, illustrating the metal tolerance processes developed by plants, either by exclusion or accumulation. We further applied chemical processes to contaminated biomasses. For instance, optimization of an organosolv pre-treatment allowed for removing ca. 50% of Fe and Mn from contaminated biomasses, while Ecocatalysis was also successfully applied to i.e. Zn hyperaccumulating species (A. halleri)
    corecore