Lipidic lyotropic liquid crystals: Insights on biomedical applications

Liquid crystals (LCs) possess unique physicochemical properties, translatable into a wide range of applications. To date, lipidic lyotropic LCs (LLCs) have been extensively explored in drug delivery and imaging owing to the capability to encapsulate and release payloads with different characteristics. The current landscape of lipidic LLCs in biomedical applications is provided in this review. Initially, the main properties, types, methods of fabrication and applications of LCs are showcased. Then, a comprehensive discussion of the main biomedical applications of lipidic LLCs accordingly to the application (drug and biomacromolecule delivery, tissue engi-neering and molecular imaging) and route of administration is examined. Further discussion of the main limi-tations and perspectives of lipidic LLCs in biomedical applications are also provided.Statement of significance: Liquid crystals (LCs) are those systems between a solid and liquid state that possess unique morphological and physicochemical properties, translatable into a wide range of biomedical applications. A short description of the properties of LCs, their types and manufacturing procedures is given to serve as a background to the topic. Then, the latest and most innovative research in the field of biomedicine is examined, specifically the areas of drug and biomacromolecule delivery, tissue engineering and molecular imaging. Finally, prospects of LCs in biomedicine are discussed to show future trends and perspectives that might be utilized. This article is an ampliation, improvement and actualization of our previous short forum article "Bringing lipidic lyotropic liquid crystal technology into biomedicine" published in TIPS

Monitoring dexamethasone skin biodistribution with ex vivo MALDI-TOF mass spectrometry imaging and confocal Raman microscopy

Two of the most promising techniques in terms of ex vivo skin imaging and quantifying are confocal Raman microscopy and MALDI-TOF mass spectrometry imaging (MALDI-TOF MSI). Both techniques were set up, and the semiquantitative skin biodistribution of previously developed dexamethasone (DEX) loaded lipomers was compared using Benzalkonium chloride (BAK) as a tracer of the nanoparticles. In MALDI-TOF MSI, DEX was derivatised with GirT (DEX-GirT) and the semiquantitative biodistribution of both DEX-GirT and BAK was successfully obtained. The amount of DEX measured by confocal Raman microscopy was higher than that measured by MALDI-TOF MSI, but MALDI-TOF MSI proved to be a more suitable technique for tracing BAK. An absorption-promoting tendency of DEX loaded in lipomers versus a free-DEX solution was observed in confocal Raman microscopy. The higher spatial resolution of confocal Raman microscopy (350 nm) with respect to MALDI-TOF MSI (50 mu m) allowed to observe specific skin structures like hair follicles. Nevertheless, the faster sampling rate of MALDI-TOF-MSI, permitted the analysis of larger tissue regions. In conclusion, both techniques allowed to simultaneously analyze semiquantitative data together with qualitative images of biodistribution, which is a very helpful tool when designing nanoparticles that accumulate in specific anatomical regions

Novel Polymeric Formulation for Removal of Gastrointestinal Polyps by Digestive Endoscopy

Álvaro Gimeno Sandig from Animal House Bellvitge University of Barcelona is acknowledged for his technical support.Endoscopic mucosal resection (EMR) and endoscopic submucosal dissection (ESD) are two techniques used in the resection of gastrointestinal mucosal polyps. The aim of this work is the development and evaluation of an innovative polymeric solution containing sodium carboxymethylcellulose and hyaluronic acid. For this purpose, several mixtures of these two main components, as well as other components such as fructose, citric acid, and zinc, are evaluated in terms of physicochemical and microbiological properties, rheological behavior, extensibility, syringeability, and stability at different storage conditions. Furthermore, the potential production of mucosal elevation and duration is also studied by an ex vivo model using porcine stomach and colon. Results show that the developed polymeric solutions possess optimal values of pH, from 4.58 to 6.63, for their use in the gastrointestinal tract. The formulations exhibit both Newtonian and pseudoplastic behaviors with different viscosity values as a function of their composition. All formulations exhibit high stability properties and no bacterial or fungal growth is detected. MCS01 and MCS05 are the polymeric solutions with the best syringeability results. In this line, MCS05 is the formulation that provides the highest, 2.20 ± 0.18 cm and 1.40 ± 0.11 cm, and longest-lasting, for more than 120 min, elevation effect on porcine submucosal stomach and colon tissues, respectively. Thus, it can be concluded that polymeric solution MCS05 might be considered as a promising tool for use in human EMR and ESD.This research was funded by the local Regional Government of Andalusia (Junta de Andalucía), grant number PIN-0479-2016

Intravitreal implants manufactured by supercritical foaming for treating retinal diseases

Chronic retinal diseases, such as age-related macular degeneration (AMD), are a major cause of global visual impairment. However, current treatment methods involving repetitive intravitreal injections pose financial and health burdens for patients. The development of controlled drug release systems, particularly for biological drugs, is still an unmet need in prolonging drug release within the vitreous chamber. To address this, green supercritical carbon dioxide (scCO2) foaming technology was employed to manufacture porous poly(lactic-co-glycolic acid) (PLGA)-based intravitreal implants loaded with dexamethasone. The desired implant dimensions were achieved through 3D printing of customised moulds. By varying the depressurisation rates during the foaming process, implants with different porosities and dexamethasone release rates were successfully obtained. These implants demonstrated controlled drug release for up to four months, surpassing the performance of previously developed implants. In view of the positive results obtained, a pilot study was conducted using the monoclonal antibody bevacizumab to explore the feasibility of this technology for preparing intraocular implants loaded with biologic drug molecules. Overall, this study presents a greener and more sustainable alternative to conventional implant manufacturing techniques, particularly suited for drugs that are susceptible to degradation under harsh conditions

Characterization of New Proteomic Biomarker Candidates in Mucopolysaccharidosis Type IVA

Mucopolysaccharidosis type IVA (MPS IVA) is a lysosomal storage disease caused by mutations in the N-acetylgalactosamine-6-sulfatase (GALNS) gene. Skeletal dysplasia and the related clinical features of MPS IVA are caused by disruption of the cartilage and its extracellular matrix, leading to a growth imbalance. Enzyme replacement therapy (ERT) with recombinant human GALNS has yielded positive results in activity of daily living and endurance tests. However, no data have demonstrated improvements in bone lesions and bone grow thin MPS IVA after ERT, and there is no correlation between therapeutic efficacy and urine levels of keratan sulfate, which accumulates in MPS IVA patients. Using qualitative and quantitative proteomics approaches, we analyzed leukocyte samples from healthy controls (n = 6) and from untreated (n = 5) and ERT-treated (n = 8, sampled before and after treatment) MPS IVA patients to identify potential biomarkers of disease. Out of 690 proteins identified in leukocytes, we selected a group of proteins that were dysregulated in MPS IVA patients with ERT. From these, we identified four potential protein biomarkers, all of which may influence bone and cartilage metabolism: lactotransferrin, coronin 1A, neutral alpha-glucosidase AB, and vitronectin. Further studies of cartilage and bone alterations in MPS IVA will be required to verify the validity of these proteins as potential biomarkers of MPS IVA

Effect of Penetration Enhancers on Drug Nail Permeability from Cyclodextrin/Poloxamer-Soluble Polypseudorotaxane-Based Nail Lacquers

Nail delivery has interest for local treatment of nail diseases. Nevertheless, the low permeability of drugs in the nail plaque precludes the efficacy of local treatments. The use of penetration enhancers can increase drug permeability and improve the efficacy of the treatment of nail pathologies. In this work, different chemical substances have been evaluated as potential penetration enhancers. With this aim, the effect of different substances such as sodium lauryl sulfate (SLS), polyethylene glycol 300 (PEG 300), carbocysteine, N-acetylcysteine, lactic acid, potassium phosphate, Labrasol® and Labrafil® in the microstructure, nail surface and drug permeability has been evaluated. The models obtained by mercury intrusion porosimetry and PoreXpert™ software show a more porous structure in nails treated with different enhancers. Permeation studies with bovine hooves and nails revealed that all the hydroalcoholic lacquers developed, and particularly those prepared with SLS, provide better nail penetration of the drugs ciclopirox olamine and clobetasol propionate. Results have shown that the increase of the drug penetration in the nail is caused by the formation of a porous random microstructure and by the decrease of the contact angle between lacquers and the surface or the nail plaque. The presence of SLS produces an improvement in the spreading of the solution on the nail surface and promotes the penetration of the solution into the nail pores. The hydroalcoholic lacquer, elaborated with cyclodextrin/poloxamer soluble polypseudorotaxane and sodium lauryl sulfate as an enhancer, allowed the rate of diffusion and penetration of the active ingredient within the nail to be significantly higher than obtained with the reference lacquers when using either ciclopirox olamine or clobetasol propionate as the active ingredient

Effect on Nail Structure and Transungual Permeability of the Ethanol and Poloxamer Ratio from Cyclodextrin-Soluble Polypseudorotaxanes Based Nail Lacquer

Aqueous-based nail lacquers have shown potential in promoting the diffusion of drugs into the nail. In our laboratory, we have recently developed a transungual delivery system based on an aqueous dispersion of cyclodextrin-poloxamer soluble polypseudorotaxanes, supramolecular host−guest assemblies that improves the drug permeation into the nail. However, the high-water content and the rheological and adhesive properties of this lacquer negatively affect properties that play a fundamental role in the patients’ acceptance such as stickiness, nail film formation or drying rate, properties. In this work, we have optimized the composition of these lacquers to improve these properties whilst maintaining good drug permeation profiles. Incorporating ethanol into the vehicle and reducing the proportion of Poloxamer 407 (PL), provided a good strategy. The use of hydro-ethanolic mixtures (>50% ethanol) and the reduction of the poloxamer concentration significantly improved the lacquer drying speed by reducing the stickiness and promoting film formation on the nail surface. Additionally, in a surprising way, the use of hydro-ethanolic vehicles further enhanced the permeation of ciclopirox olamine and clobetasol propionate, used for the treatment of onychomycosis and nail psoriasis respectively, into the nail and hooves

Ternary complexation of benzoic acid with β-cyclodextrin and aminoacids. Experimental and theoretical studies

β-Cyclodextrin (β-CD) is a well-known host molecule used to prepare inclusion complexes. Considering that the three dimensional array of these complexes depends on the inclusion mode of the guest molecule within the β-CD cavity, the development of methods to elucidate their structure is highly desired. The main objective of this work aimed to shed light on the structural and energetic features related to the effect of aminoacids (AA: glycine, valine, isoleucine, arginine and glutamic acid) as third components on the complexation of benzoic acid (BA) with β-CD. In addition, hippuric acid (HA), a structure resembling a BA-glycine conjugate, was included as a model molecule to compare the effect of glycine present as a chemical moiety covalently linked to the guest molecule. Phase solubility analyses were performed to determine the relative binding affinities for binary (BA:β-CD and HA:βCD) and ternary (BA:β-CD:AA) complexes, obtaining the following results: BA:β-CD:AA > BA:β-CD: > HA:β-CD. As part of the structural elucidation of the studied complexes, their spatial configurations were determined by NMR and further characterized applying molecular modeling (i.e., molecular docking and molecular dynamics) techniques. Both approaches evidenced that BA and HA included their aromatic rings in the β-CD hydrophobic cavity, both in binary and ternary complexes. When free aminoacids were present as third components, an enhanced affinity of BA for β-CD was observed, feature that was not evidenced when the aminoacid was covalently bound to the included guest (i.e., HA). Exhaustive structural and energetic analyses are presented to rationalize and support these findings.Fil: Méndez, Santiago García. Universidad de Santiago de Compostela; EspañaFil: Otero Espinar, Francisco J.. Universidad de Santiago de Compostela; EspañaFil: Alvarez, Asteria Luzardo. Universidad de Santiago de Compostela; EspañaFil: Longhi, Marcela Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica; ArgentinaFil: Quevedo, Mario Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica; ArgentinaFil: Zoppi, Ariana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica; Argentin