JOKARUS - Design of a compact optical iodine frequency reference for a sounding rocket mission

We present the design of a compact absolute optical frequency reference for space applications based on hyperfine transitions in molecular iodine with a targeted fractional frequency instability of better than $3\cdot 10^{-14}$. It is based on a micro-integrated extended cavity diode laser with integrated optical amplifier, fiber pigtailed second harmonic generation wave-guide modules, and a quasi-monolithic spectroscopy setup with operating electronics. The instrument described here is scheduled for launch end of 2017 aboard the TEXUS 54 sounding rocket as an important qualification step towards space application of iodine frequency references and related technologies. The payload will operate autonomously and its optical frequency will be compared to an optical frequency comb during its space flight

Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

Fluoroethylene carbonate (FEC) and vinylene carbonate (VC) are the most frequently used electrolyte components to enhance the lifetime of anode materials in Li-ion batteries, but for silicon it is still ambiguous when FEC or VC is more beneficial. Herein, a nanostructured silicon/carbon anode derived from low-cost HSiCl3 is tailored by the rational choice of the electrolyte component, to obtain an anode material outperforming current complex silicon structures. We demonstrate highly reversible areal capacities of up to 5 mA h/cm2 at 4.4 mg/cm2 mass loading, a specific capacity of 1280 mA h/gElectrode, a capacity retention of 81% after 500 deep-discharge cycles versus lithium metal and successful full-cell tests with high-voltage cathodes meeting the requirements for real application. Electrochemical impedance spectroscopy and post-mortem investigation provide new insights in tailoring the interfacial properties of silicon-based anodes for high performance anode materials based on an alloying mechanism with large volume changes. The role of fluorine in the FEC-derived interfacial layer is discussed in comparison with the VC-derived layer and possible degradation mechanisms are proposed. We believe that this study gives a valuable understanding and provides new strategies on the facile use of additives for highly reversible silicon anodes in Li-ion batteries.Fil: Jaumann, Tony. Ifw Dresden; AlemaniaFil: Balach, Juan Manuel. Ifw Dresden; AlemaniaFil: Langklotz, Ulrike. Technische Universität Dresden; AlemaniaFil: Sauchuk, Viktar. Fraunhofer Institute for Ceramic Materials and Systems; AlemaniaFil: Fritsch, Marco. Fraunhofer Institute for Ceramic Materials and Systems; AlemaniaFil: Michaelis, Alexander. Technische Universität Dresden; AlemaniaFil: Teltevskij, Valerij. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Mikhailova, Daria. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Oswald, Steffen. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Klose, Markus. Leibniz Institute for Solid State and Materials Research; Alemania. Technische Universität Dresden; AlemaniaFil: Stephani, Guenter. Branch Lab Dresden. Fraunhofer Institute for Manufacturing Technology and Advanced Materials; ArgentinaFil: Hauser, Ralf. Branch Lab Dresden. Fraunhofer Institute for Manufacturing Technology and Advanced Materials; ArgentinaFil: Eckert, Jürgen. Technische Universität Dresden; Alemania. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Giebeler, Lars. Leibniz Institute for Solid State and Materials Research; Alemania. Technische Universität Dresden; Alemani

SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: The role of electrode preparation, FEC addition and binders

Silicon is a promising negative electrode for secondary lithium-based batteries, but the electrochemical reversibility of particularly nanostructured silicon electrodes drastically depends on their interfacial characteristics, commonly known as the solid electrolyte interface (SEI). The beneficial origin of certain electrolyte additives or different binders is still discussed controversially owing to the challenging peculiarities of interfacial post-mortem investigations of electrodes. In this work, we address the common difficulties of SEI investigations of porous silicon/carbon nanostructures and study the addition of a fluoroethylene carbonate (FEC) as a stabilizing additive as well as the use of two different binders, carboxymethyl cellulose/styrene-butadiene rubber (CMC/SBR) and polyacrylic acid (PAA), for the SEI formation. The electrode is composed of silicon nanocrystallites below 5 nm diameter allowing a detailed investigation of interfacial characteristics of silicon owing to the high surface area. We first performed galvanostatic long-term cycling (400 times) and carried out comprehensive ex situ characterization of the cycled nanocrystalline silicon electrodes with XRD, EDXS, TEM and XPS. We modified the preparation of the electrode for post-mortem characterization to distinguish between electrolyte components and the actual SEI. The impact of the FEC additive and two different binders on the interfacial layer is studied and the occurrence of diverse compounds, in particular LiF, Li2O and phosphates, is discussed. These results help to understand general issues in SEI formation and to pave the way for the development of advanced electrolytes allowing for a long-term performance of nanostructured Si-based electrodes

Heme oxygenase-1 genotype and restenosis after balloon angioplasty: a novel vascular protective factor

AbstractObjectivesWe investigated the association of the heme oxygenase-1 (HO-1) promoter genotype with the inflammatory response and restenosis after balloon angioplasty.BackgroundHeme oxygenase-1, which is induced by balloon angioplasty, can inhibit neointima formation and vascular remodeling. A dinucleotide repeat in the HO-1 gene promoter shows a length polymorphism that modulates HO-1 gene transcription. Short (<25 guanosine thymidine [GT]) repeats are associated with a 10-fold greater up-regulation of HO-1 than are longer repeats.MethodsWe studied 381 consecutive patients who underwent femoropopliteal balloon angioplasty (n = 210) and comparison groups with femoropopliteal stenting (n = 68) and lower limb angiography (n = 103). C-reactive protein (CRP) was measured at baseline, 24, and 48 h. We evaluated patency at six months by duplex sonography and assessed the association of the length of GT repeats in the HO-1 gene promoter with postintervention CRP and restenosis.ResultsRestenosis within six months was found in 74 patients (35%) after balloon angioplasty and in 21 patients (31%) after stenting. After balloon angioplasty, carriers of the short length (<25 GT) dinucleotide repeats had a lower postintervention CRP at 24 h (p = 0.009) and 48 h (p < 0.001) and a reduced risk for restenosis (adjusted relative risk 0.43, 95% confidence interval: 0.24 to 0.71, p < 0.001) compared with patients with longer alleles. After stenting or angiography, we found no association between the HO-1 genotype with CRP or restenosis.ConclusionsThe HO-1 promoter genotype that controls the degree of HO-1 up-regulation in response to stress stimuli is associated with the postintervention inflammatory response and the restenosis risk after balloon angioplasty

Transcriptome analysis of human cancer reveals a functional role of Heme Oxygenase-1 in tumor cell adhesion

<p>Abstract</p> <p>Background</p> <p>Heme Oxygenase-1 (HO-1) is expressed in many cancers and promotes growth and survival of neoplastic cells. Recently, HO-1 has been implicated in tumor cell invasion and metastasis. However, the molecular mechanisms underlying these biologic effects of HO-1 remain largely unknown. To identify a common mechanism of action of HO-1 in cancer, we determined the global effect of HO-1 on the transcriptome of multiple tumor entities and identified a universal HO-1-associated gene expression signature.</p> <p>Results</p> <p>Genome-wide expression profiling of Heme Oxygenase-1 expressing versus HO-1 silenced BeWo choriocarcinoma cells as well as a comparative meta-profiling of the preexisting expression database of 190 human tumors of 14 independent cancer types led to the identification of 14 genes, the expression of which correlated strongly and universally with that of HO-1 (P = 0.00002). These genes included regulators of cell plasticity and extracellular matrix (ECM) remodeling (MMP2, ADAM8, TGFB1, BGN, COL21A1, PXDN), signaling (CRIP2, MICB), amino acid transport and glycosylation (SLC7A1 and ST3GAL2), estrogen and phospholipid biosynthesis (AGPAT2 and HSD17B1), protein stabilization (IFI30), and phosphorylation (ALPPL2). We selected PXDN, an adhesion molecule involved in ECM formation, for further analysis and functional characterization. Immunofluorescence and Western blotting confirmed the positive correlation of expression of PXDN and HO-1 in BeWo cancer cells as well as co-localization of these two proteins in invasive extravillous trophoblast cells. Modulation of HO-1 expression in both loss-of and gain-of function cell models (BeWo and 607B melanoma cells, respectively) demonstrated a direct relationship of HO-1 expression with cell adhesion to Fibronectin and Laminin coated wells. The adhesion-promoting effects of HO-1 were dependent on PXDN expression, as loss of PXDN in HO-1 expressing BeWo and 607B cells led to reduced cell attachment to Laminin and Fibronectin coated wells.</p> <p>Conclusions</p> <p>Collectively, our results show that HO-1 expression determines a distinct 'molecular signature' in cancer cells, which is enriched in genes associated with tumorigenesis. The protein network downstream of HO-1 modulates adhesion, signaling, transport, and other critical cellular functions of neoplastic cells and thus promotes tumor cell growth and dissemination.</p

Binding Energy Referencing for XPS in Alkali Metal-Based Battery Materials Research (II): Application to Complex Composite Electrodes

X-ray photoelectron spectroscopy (XPS) is a key method for studying (electro-)chemical changes in metal-ion battery electrode materials. In a recent publication, we pointed out a conflict in binding energy (BE) scale referencing at alkali metal samples, which is manifested in systematic deviations of the BEs up to several eV due to a specific interaction between the highly reactive alkali metal in contact with non-conducting surrounding species. The consequences of this phenomenon for XPS data interpretation are discussed in the present manuscript. Investigations of phenomena at surface-electrolyte interphase regions for a wide range of materials for both lithium and sodium-based applications are explained, ranging from oxide-based cathode materials via alloys and carbon-based anodes including appropriate reference chemicals. Depending on material class and alkaline content, specific solutions are proposed for choosing the correct reference BE to accurately define the BE scale. In conclusion, the different approaches for the use of reference elements, such as aliphatic carbon, implanted noble gas or surface metals, partially lack practicability and can lead to misinterpretation for application in battery materials. Thus, this manuscript provides exemplary alternative solutions

Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

Fluoroethylene carbonate (FEC) and vinylene carbonate (VC) are the most frequently used electrolyte components to enhance the lifetime of anode materials in Li-ion batteries, but for silicon it is still ambiguous when FEC or VC is more beneficial. Herein, a nanostructured silicon/carbon anode derived from low-cost HSiCl3 is tailored by the rational choice of the electrolyte component, to obtain an anode material outperforming current complex silicon structures. We demonstrate highly reversible areal capacities of up to 5 mA h/cm2 at 4.4 mg/cm2 mass loading, a specific capacity of 1280 mA h/gElectrode, a capacity retention of 81% after 500 deep-discharge cycles versus lithium metal and successful full-cell tests with high-voltage cathodes meeting the requirements for real application. Electrochemical impedance spectroscopy and post-mortem investigation provide new insights in tailoring the interfacial properties of silicon-based anodes for high performance anode materials based on an alloying mechanism with large volume changes. The role of fluorine in the FEC-derived interfacial layer is discussed in comparison with the VC-derived layer and possible degradation mechanisms are proposed. We believe that this study gives a valuable understanding and provides new strategies on the facile use of additives for highly reversible silicon anodes in Li-ion batteries

Use of IFNγ/IL10 Ratio for Stratification of Hydrocortisone Therapy in Patients With Septic Shock

Large clinical trials testing hydrocortisone therapy in septic shock have produced conflicting results. Subgroups may benefit of hydrocortisone treatment depending on their individual immune response. We performed an exploratory analysis of the database from the international randomized controlled clinical trial Corticosteroid Therapy of Septic Shock (CORTICUS) employing machine learning to a panel of 137 variables collected from the Berlin subcohort comprising 83 patients including demographic and clinical measures, organ failure scores, leukocyte counts and levels of circulating cytokines. The identified theranostic marker was validated against data from a cohort of the Hellenic Sepsis Study Group (HSSG) (n = 246), patients enrolled in the clinical trial of Sodium Selenite and Procalcitonin Guided Antimicrobial Therapy in Severe Sepsis (SISPCT, n = 118), and another, smaller clinical trial (Crossover study, n = 20). In addition, in vitro blood culture experiments and in vivo experiments in mouse models were performed to assess biological plausibility. A low serum IFNγ/IL10 ratio predicted increased survival in the hydrocortisone group whereas a high ratio predicted better survival in the placebo group. Using this marker for a decision rule, we applied it to three validation sets and observed the same trend. Experimental studies in vitro revealed that IFNγ/IL10 was negatively associated with the load of (heat inactivated) pathogens in spiked human blood and in septic mouse models. Accordingly, an in silico analysis of published IFNγ and IL10 values in bacteremic and non-bacteremic patients with the Systemic Inflammatory Response Syndrome supported this association between the ratio and pathogen burden. We propose IFNγ/IL10 as a molecular marker supporting the decision to administer hydrocortisone to patients in septic shock. Prospective clinical studies are necessary and standard operating procedures need to be implemented, particularly to define a generic threshold. If confirmed, IFNγ/IL10 may become a suitable theranostic marker for an urging clinical need