Mechanisms of hardening in HCP structures through dislocation transmutation and accommodation effects by glide twinning: application to magnesium

At low temperatures, glide twinning activates in HCP structures easier than non-close packed slip necessary to accommodate strain along the c-axis. In contrast to slip, twinning occurs as an accumulation of successive stacking faults that properly report reconstruction of the stacking sequence in a new crystal-reorientated lenticular lamella. These faults are spread by partial dislocations known as twinning dislocations, forcing atoms to switch positions by shear into new crystal planes. As the twinning dislocations thread the faults, the new crystal lamella grows at the expense of the parent. Grain texture changes upon strain, and a strong non-linear trend marks the strain hardening rate. The strain hardening rate changes to a point where it switches sign upon strain. Since activation of these twinning dislocations obey Schmid’s law, twinning could be precluded or exhaustively promoted in sharp textures upon slight changes in loading orientations, so strong anisotropy arises. Moreover, a twinning shear can only reproduce the stacking sequence in one direction, unless the twin mode changes or the c/a ratio crosses a certain ratio. When a twin mode arises with reversed sign, the reorientation is different and more importantly, the strength is different and also the growth rate. Therefore, in addition to strain anisotropy, twin polarity induces a strong asymmetry in textured HCP structures, e.g. wrought HCP metals. This anisotropy/asymmetry is still a barrier to the great economic gain expected from the industrialization of low density, high specific strength and stiffness, HCP Magnesium. This barrier has stimulated efforts to identify the missing links in current scientific knowledge to proper prediction of Magnesium anisotropy. The effect of twinninginduced texture change on the mechanical response is of a major concern. Mesoscale modelers still struggle, without success to predict simultaneously twinning and strain hardening rates upon arbitrary loading directions. We propose a new mechanism that relies on admitting dislocation populations of the twin by dislocations transmuted from the parent when they intersect twinning disconnections. These dislocations interact with original dislocations created in the twin to cause hardening able to faithfully capture anisotropy upon any loading orientation and any initial texture

Mechanisms of hardening in HCP structures through dislocation transmutation and accommodation effects by glide twinning: application to magnesium

At low temperatures, glide twinning activates in HCP structures easier than non-close packed slip necessary to accommodate strain along the c-axis. In contrast to slip, twinning occurs as an accumulation of successive stacking faults that properly report reconstruction of the stacking sequence in a new crystal-reorientated lenticular lamella. These faults are spread by partial dislocations known as twinning dislocations, forcing atoms to switch positions by shear into new crystal planes. As the twinning dislocations thread the faults, the new crystal lamella grows at the expense of the parent. Grain texture changes upon strain, and a strong non-linear trend marks the strain hardening rate. The strain hardening rate changes to a point where it switches sign upon strain. Since activation of these twinning dislocations obey Schmid’s law, twinning could be precluded or exhaustively promoted in sharp textures upon slight changes in loading orientations, so strong anisotropy arises. Moreover, a twinning shear can only reproduce the stacking sequence in one direction, unless the twin mode changes or the c/a ratio crosses a certain ratio. When a twin mode arises with reversed sign, the reorientation is different and more importantly, the strength is different and also the growth rate. Therefore, in addition to strain anisotropy, twin polarity induces a strong asymmetry in textured HCP structures, e.g. wrought HCP metals. This anisotropy/asymmetry is still a barrier to the great economic gain expected from the industrialization of low density, high specific strength and stiffness, HCP Magnesium. This barrier has stimulated efforts to identify the missing links in current scientific knowledge to proper prediction of Magnesium anisotropy. The effect of twinninginduced texture change on the mechanical response is of a major concern. Mesoscale modelers still struggle, without success to predict simultaneously twinning and strain hardening rates upon arbitrary loading directions. We propose a new mechanism that relies on admitting dislocation populations of the twin by dislocations transmuted from the parent when they intersect twinning disconnections. These dislocations interact with original dislocations created in the twin to cause hardening able to faithfully capture anisotropy upon any loading orientation and any initial texture

Farmed salmonids drive the abundance, ecology and evolution of parasitic salmon lice in Norway

Sea cage fish farming is typically open to the environment, with disease transmission possible between farmed and wild hosts. In salmonid aquaculture, salmon louse Lepeophtheirus salmonis infestations cause production losses, reduce welfare for farmed fish and increase infestation rates for wild fish populations. The high density of hosts in farms likely also shifts the coevolutionary arms race between host and parasite, with ecological and evolutionary consequences for the salmon louse. Using farm-reported salmon and louse abundances and publicly reported estimates of wild salmonid host abundances and the salmon lice they carry, we estimated (1) the relative abundance of farmed and wild salmonid hosts and (2) the relative importance of each for the abundance of salmon lice for the coastal zone of Norway from 1998 to 2017. Farmed hosts increased in importance over time with the expansion of the industry. From 2013 to 2017, farmed salmonids outnumbered wild salmonids by 267-281:1. By 2017, farmed salmonids accounted for 99.6% of available hosts and produced 99.1% of adult female salmon lice and 97.6% of mated (ovigerous) adult female salmon lice in Norwegian coastal waters. The persistent dominance of farmed hosts has clear implications: (1) management decisions that aim to limit lice abundance can be guided by lice data from farms alone, as lice on wild salmonids make a trivial contribution to the national lice population; and (2) strategies to prevent or treat lice infestations are vulnerable to the evolution of resistance, as the pool of wild hosts is inconsequential and will not act as a refuge large enough to stem the evolution of resistance. As the Norwegian salmon industry expands and salmon lice infestations continue, farmed salmon will drive the ecology and evolution of salmon lice.publishedVersio

Manipulation of farmed Atlantic salmon swimming behaviour through the adjustment of lighting and feeding regimes as a tool for salmon lice control

This paper describes a study in which environmental manipulation of salmon swimming depth was tested in an attempt to reduce farm infection of Atlantic salmon, Salmo salar by the salmon louse, Lepeophtheirus salmonis. The effects of submerged artificial lighting (positioned at 10m depth) in combination with submerged feeding (delivered at 5m depth) were tested with respect to salmon swimming depth and sea lice infection, following the hypothesis that L. salmonis infection in a commercial salmon population is reduced when exposed to deep lighting and feeding. This is based on two assumptions, firstly that planktonic L. salmonis larvae principally remain in surface waters (top 4m) and secondly, that deep lighting and feeding attract salmon to deeper water depths. Results from commercial scale trials confirmed that salmon swimming behaviour is altered under submerged feeding conditions with fish attracted to the feeding corridor during the feeding process. When the fish reached satiation or feeding ceased, they returned to the surface waters during the day. Submerged lighting attracted the fish to the illuminated water depths during the night. During the day, natural light overruled these effects to some extent. The number of L. salmonis on fish exposed to deep submerged lighting was significantly lower than the number of lice found on salmon in cages with surface lighting during the summer months. Submerged feeding showed no advantage over surface feeding with respect to the number of L. salmonis found in these trials. The results of the study suggest that swimming depth manipulation can be used at a commercial scale to reduce salmon lice burdens on Atlantic salmon stocks