Nanofriction mechanisms derived from the dependence of friction on load and sliding velocity from air to UHV on hydrophilic silicon

This paper examines friction as a function of the sliding velocity and applied normal load from air to UHV in a scanning force microscope (SFM) experiment in which a sharp silicon tip slides against a flat Si(100) sample. Under ambient conditions, both surfaces are covered by a native oxide, which is hydrophilic. During pump-down in the vacuum chamber housing the SFM, the behavior of friction as a function of the applied normal load and the sliding velocity undergoes a change. By analyzing these changes it is possible to identify three distinct friction regimes with corresponding contact properties: (a) friction dominated by the additional normal forces induced by capillarity due to the presence of thick water films, (b) higher drag force from ordering effects present in thin water layers and (c) low friction due to direct solid-solid contact for the sample with the counterbody. Depending on environmental conditions and the applied normal load, all three mechanisms may be present at one time. Their individual contributions can be identified by investigating the dependence of friction on the applied normal load as well as on the sliding velocity in different pressure regimes, thus providing information about nanoscale friction mechanisms

Modelling microbial transport in simulated low-grade heap bioleaching systems: The hydrodynamic dispersion model

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.The hydrodynamic model was developed to describe microbial growth kinetics within heap bioleaching systems. Microbial partitioning between the bulk flowing pregnant leach solution (PLS) and ore-associated phases that exist within the low-grade chalcopyrite ore bed, as a function of microbial transport between these identified phases, was investigated. Microbial transport between the bulk flowing PLS and ore-associated phases was postulated to be driven by the microbial concentration gradient between the phases, with advection and dispersion forces facilitating microbial colonisation of, and transport through, the ore bed. The population balance model (PBM) was incorporated into the hydrodynamic model to estimate mineral dissolution rates as a function of available surface area appropriately. Temporal and spatial variations in microbial concentration in the PLS and ore-associated phases are presented together with model predictions for overall ferrous and ferric iron concentrations, which account for iron concentrations in the bulk flowing PLS and that in the vicinity of the mineral surface. The model predictions for PLS and ore-associated microbial concentrations are validated with experimental data, demonstrating the improvement of this model over the previously presented ‘biomass model’. Based on Michaelis-Menten type kinetics, model-predicted true maximum specific growth rates for Acidithiobacillus ferrooxidans in the PLS and ore-associated phases were found to be 0.0004 and 0.019 h −1 , respectively. Estimated microbial attachment and detachment rates suggest that microbial growth is more prolific in the ore-associated phases with subsequent transport to the bulk flowing PLS. Sensitivity analysis of the hydrodynamic transport model to changes in the advection mass transfer coefficient, dispersion coefficient and inoculum size are discussed. For the current reactor configuration, increasing the irrigation rate from 2 to 2.5 L m −2  h −1 , i.e. increasing the advection mass transfer rate, resulted in a significant decrease in microbial retention within the ore bed.The financial assistance of the Department of Science and Technology (DST) and the National Research Foundation (NRF) of South Africa, through the South African Research Chairs Initiative (SARChI UID64778) is hereby acknowledged. Opinions expressed and conclusions arrived, are those of the author and are not necessarily to be attributed to the NRF

Julia Roberts, Tom Hanks & Co: Wie Stars zur effizienten Zuordnung von Filmen auf Filmkonsumenten beitragen

Filmstars gelten für den Erfolg eines Kinofilms als wesentliche Ingredienz und verdienen zum Teil astronomische Gehälter. In diesem Beitrag wird die Funktion des Filmstars als "Wegweiser" auf einem Markt untersucht, der durch substanzielle Qualitätsunsicherheit charakterisiert ist. Filmstars überbrücken auf verschiedene Weise Informationsungleichgewichte zum Konsumenten. Die Karriereplanung von Schauspielern gewinnt aus dieser Perspektive eine besondere Bedeutung

Using airborne LiDAR Survey to explore historic-era archaeological landscapes of Montserrat in the eastern Caribbean

This article describes what appears to be the first archaeological application of airborne LiDAR survey to historic-era landscapes in the Caribbean archipelago, on the island of Montserrat. LiDAR is proving invaluable in extending the reach of traditional pedestrian survey into less favorable areas, such as those covered by dense neotropical forest and by ashfall from the past two decades of active eruptions by the Soufrière Hills volcano, and to sites in localities that are inaccessible on account of volcanic dangers. Emphasis is placed on two aspects of the research: first, the importance of ongoing, real-time interaction between the LiDAR analyst and the archaeological team in the field; and second, the advantages of exploiting the full potential of the three-dimensional LiDAR point cloud data for purposes of the visualization of archaeological sites and features

Pulmonary Hypertension in Patients with Chronic Fibrosing Idiopathic Interstitial Pneumonias

Background Pulmonary hypertension (PH) is a common finding in patients with chronic fibrosing idiopathic interstitial pneumonias (IIP). Little is known about the response to pulmonary vasodilator therapy in this patient population. COMPERA is an international registry that prospectively captures data from patients with various forms of PH receiving pulmonary vasodilator therapies. Methods We retrieved data from COMPERA to compare patient characteristics, treatment patterns, response to therapy and survival in newly diagnosed patients with idiopathic pulmonary arterial hypertension (IPAH) and PH associated with IIP (PH-IIP). Results Compared to patients with IPAH (n = 798), patients with PH-IIP (n = 151) were older and predominantly males. Patients with PH-IIP were treated predominantly with phosphodiesterase-5 inhibitors (88% at entry, 87% after 1 year). From baseline to the first follow-up visit, the median improvement in 6MWD was 30 m in patients with IPAH and 24.5 m in patients with PH-IIP (p = 0.457 for the difference between both groups). Improvements in NYHA functional class were observed in 22.4% and 29.5% of these patients, respectively (p = 0.179 for the difference between both groups). Survival rates were significantly worse in PH-IIP than in IPAH (3-year survival 34.0 versus 68.6%; p<0.001). Total lung capacity, NYHA class IV, and mixed-venous oxygen saturation were independent predictors of survival in patients with PH-IIP. Conclusions Patients with PH-IIP have a dismal prognosis. Our results suggest that pulmonary vasodilator therapy may be associated with short-term functional improvement in some of these patients but it is unclear whether this treatment affects survival

Investigations towards incorporation of Eu3+ and Cm3+ during ZrO2 crystallization in aqueous solution

Nuclear energy provides a widely applied carbon-reduced energy source. Following operation, the spent nuclear fuel (SNF), containing a mixture of radiotoxic elements such as transuranics, needs to be safely disposed of. Safe storage of SNF in a deep geological repository (DGR) relies on multiple engineered and natural retention barriers to prevent environmental contamination. In this context, zirconia (ZrO2) formed on the SNF rod cladding, could be employed as an engineered barrier for immobilization of radionuclides via structural incorporation. This study investigates the incorporation of Eu3+ and Cm3+, representatives for trivalent transuranics, into zirconia by co-precipitation and crystallization in aqueous solution at 80 °C. Complementary structural and microstructural characterization has been carried out by powder X-ray diffraction (PXRD), spectrum imaging analysis based on energy-dispersive X-ray spectroscopy in scanning transmission electron microscopy mode (STEM-EDXS), and luminescence spectroscopy. The results reveal the association of the dopants with the zirconia particles and elucidate the presence of distinct bulk and superficially incorporated species. Hydrothermal aging for up to 460 days in alkaline media points to great stability of these incorporated species after initial crystallization, with no indication of phase segregation or release of Eu3+ and Cm3+ over time. These results suggest that zirconia would be a suitable technical retention barrier for mobilized trivalent actinides in a DGR

Searching for targets for the systemic therapy of mesothelioma

Increasing knowledge about the molecular characteristics of mesothelioma had led to the identification of novel potential targets for systemic therapy. This review elaborates on the rationale behind targeted approaches that have been and are undergoing exploration in mesothelioma and summarizes available clinical results and ongoing efforts to improve the systemic therapy of mesotheliom

Coordination of Tetracyanoquinodimethane-Derivatives with Tris(pentafluorophenyl)borane Provides Stronger p-Dopants with Enhanced Stability

Strong molecular dopants for organic semiconductors that are stable against diffusion are in demand, enhancing the performance of organic optoelectronic devices. The conventionally used p-dopants based on 7,7,8,8-tetracyanoquinodimethane (TCNQ) and its derivatives “FxTCN(N)Q”, such as 2,3,4,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) and 1,3,4,5,7,8-hexafluorotetracyano-naphthoquinodimethane (F6TCNNQ), feature limited oxidation strength, especially for modern polymer semiconductors with high ionization energy (IE). These small molecular dopants also exhibit pronounced diffusion in the polymer hosts. Here, we demonstrate a facile approach to increase the oxidation strength of FxTCN(N)Q by coordination with four tris(pentafluorophenyl)borane (BCF) molecules using a single-step solution mixing process, resulting in bulky dopant complexes “FxTCN(N)Q-4(BCF)”. Using a series of polymer semiconductors with IE up to 5.9 eV, we show by optical absorption spectroscopy of solutions and thin films that the efficiency of doping using FxTCN(N)Q-4(BCF) is significantly higher compared to that using FxTCN(N)Q or BCF alone. Electrical transport measurements with the prototypical poly(3-hexylthiophene-2,5-diyl) (P3HT) confirm the higher doping efficiency of F4TCNQ-4(BCF) compared to F4TCNQ. Additionally, the bulkier structure of F4TCNQ-4(BCF) is shown to result in higher stability against drift in P3HT under an applied electric field as compared to F4TCNQ. The simple approach of solution-mixing of readily accessible molecules thus offers access to enhanced molecular p-dopants for the community

Development of a lectin-affinity chromatography step for the downstream processing of influenza virus vaccines

Influenza remains due to its annual death rate and potential to cause pandemics a major public health concern. Efforts to control the annual spread of influenza have centered on prophylactic vaccinations. Human influenza vaccines are traditionally produced in embryonated hen s eggs. However, major constraints with this method, e.g. allergic reactions induced by egg proteins and lack of scalability have lead to the development of cell culture based production processes. In recent years, several continuous cell lines such as the Madin Darby canine kidney (MDCK) or the African green monkey kidney Vero cells have been successfully established for the production of influenza vaccines in cell culture. These processes require the modification of existing but also the development of new downstream strategies to account for the changed upstream technology. Downstream processing of biological products is conventionally subdivided into three steps: capture or concentration, separation or fractionation and polishing. The capture step is commonly the most expensive unit operation. Hence, the efficiency of this step has a large impact on the total process economics. The presented study focuses on the development of a proficient capture step based on lectin-affinity chromatography. Lectins are a class of carbohydrate specific proteins of non-immune origin that have a selective affinity for a carbohydrate or a group of carbohydrates. Immobilized lectins have been used successfully for many years to separate and isolate glycoconjugates, polysaccharides, soluble cell components, and cells containing glycoproteins with specific carbohydrate structures on its surface. The influenza A virus contains two spike glycoproteins on its surface: hemagglutinin (HA) and neuraminidase (NA). HA is the most abundant surface protein. It is a trimeric glycoprotein containing per subunit 3 to 9 N-linked glycosylation sites depending on the viral strain. Here the influenza A/PR/8/34 virus has been selected as a model. The HA molecule of this particular virus contains according to the NetNGlyc 1.0 Server prediction six glycosylation sites. Detailed analysis of these sites and their individual glycan structures are presently performed. Based on preliminary structural glycan analysis studies and literature data several HA-binding lectins are selected for a pre-screening via lectin-blots. The most promising lectinblot results are obtained from lectins specific for terminal galactose e.g. Erythrina cristagalli (ECL), Arachis hypogaea (PNA). Lectins, by which lectin-blot analysis suggests an interaction with viral membrane proteins, are currently screened for their suitability as an affinity matrix ligand. Therefore, centrifuged cultivation broths of influenza A/PR/8/34 virus infected MDCK cells are applied to various agaroseimmobilized lectins. Components interfering with the immobilized lectins are selectively adsorbed. Non or weak binding components are washed from the column. Subsequently, bound components are dissociated from the lectin by competitive elution with suitable hapten carbohydrates. This fraction contains the influenza virus particles and virally encoded membrane proteins, which have to be further processed for vaccine manufacturing. The extend of the subsequent purification depends on the specificity of the lectin binding to virally encoded surface proteins. Lectins with weak or no interaction with host cell proteins or medium components and strong interaction with viral membrane glycoproteins represent a powerful tool to concentrate and purify viral surface proteins from contaminating nucleic acids, medium components, and non-virally encoded host cell proteins