2,087 research outputs found
Protein-mediated DNA Loop Formation and Breakdown in a Fluctuating Environment
Living cells provide a fluctuating, out-of-equilibrium environment in which
genes must coordinate cellular function. DNA looping, which is a common means
of regulating transcription, is very much a stochastic process; the loops arise
from the thermal motion of the DNA and other fluctuations of the cellular
environment. We present single-molecule measurements of DNA loop formation and
breakdown when an artificial fluctuating force, applied to mimic a fluctuating
cellular environment, is imposed on the DNA. We show that loop formation is
greatly enhanced in the presence of noise of only a fraction of , yet
find that hypothetical regulatory schemes that employ mechanical tension in the
DNA--as a sensitive switch to control transcription--can be surprisingly robust
due to a fortuitous cancellation of noise effects
Sensitivity to the KARMEN Timing Anomaly at MiniBooNE
We present sensitivities for the MiniBooNE experiment to a rare exotic pion
decay producing a massive particle, Q^0. This type of decay represents one
possible explanation for the timing anomaly reported by the KARMEN
collaboration. MiniBooNE will be able to explore an area of the KARMEN signal
that has not yet been investigated
Description of non-specific DNA-protein interaction and facilitated diffusion with a dynamical model
We propose a dynamical model for non-specific DNA-protein interaction, which
is based on the 'bead-spring' model previously developed by other groups, and
investigate its properties using Brownian Dynamics simulations. We show that
the model successfully reproduces some of the observed properties of real
systems and predictions of kinetic models. For example, sampling of the DNA
sequence by the protein proceeds via a succession of 3d motion in the solvent,
1d sliding along the sequence, short hops between neighboring sites, and
intersegmental transfers. Moreover, facilitated diffusion takes place in a
certain range of values of the protein effective charge, that is, the
combination of 1d sliding and 3d motion leads to faster DNA sampling than pure
3d motion. At last, the number of base pairs visited during a sliding event is
comparable to the values deduced from single-molecule experiments. We also
point out and discuss some discrepancies between the predictions of this model
and some recent experimental results as well as some hypotheses and predictions
of kinetic models
Regional Mapping and Spectral Analysis of Mounds in Acidalia Planitia, Mars
Acidalia Planitia is a approx.3000 km diameter planum located in the northern plains of Mars. It is believed to be a sedimentary basin containing an accumulation of sediments brought by Hesperian outflow channels that drained the Highlands. A large number of high-albedo mounds have been identified across this basin [1-2] and understanding the process that formed them should help us understand the history of this region. Farrand et al. [2] showed that the mounds are dark in THEMIS (Thermal Emission Imaging System) nighttime IR (infrared) image data. This implies that the mounds have a lower thermal inertia than the surrounding plains (Fig. 1), suggesting that the material of the mounds is fine-grained or unconsolidated. Farrand et al. [2] also reviewed potential analogs for the mounds and concluded that a combination of mud volcanoes with evaporites around geysers or springs is most consistent with all the data. We have built on this work by creating regional maps of the features and analyzing CRISM (Compact Reconnaissance Imaging Spectrometer for Mars) data to see if there are mineralogical differences between the mounds and surrounding plains
'Nano' Morphology and Element Signatures of Early Life on Earth: A New Tool for Assessing Biogenicity
The relatively young technology of NanoSIMS is unlocking an exciting new level of information from organic matter in ancient sediments. We are using this technique to characterize Proterozoic organic material that is clearly biogenic as a guide for interpreting controversial organic structures in either terrestrial or extraterrestrial samples. NanoSIMS is secondary ion mass spectrometry for trace element and isotope analysis at sub-micron resolution. In 2005, Robert et al. [1] combined NanoSIMS element maps with optical microscopic imagery in an effort to develop a new method for assessing biogenicity of Precambrian structures. The ability of NanoSIMS to map simultaneously the distribution of organic elements with a 50 nm spatial resolution provides new biologic markers that could help define the timing of life s development on Earth. The current study corroborates the work of Robert et al. and builds on their study by using NanoSIMS to map C, N (as CN), S, Si and O of both excellently preserved microfossils and less well preserved, non-descript organics in Proterozoic chert from the ca. 0.8 Ga Bitter Springs Formation of Australia
Self-referencable frequency comb from a 170-fs, 1.5-ÎŒm solid-state laser oscillator
We report measurement of the first carrier-envelope offset (CEO) frequency signal from a spectrally broadened ultrafast solid-state laser oscillator operating in the 1.5ÎŒm spectral region. The f-to-2f CEO frequency beat signal is 49 dB above the noise floor (100-kHz resolution bandwidth) and the free-running linewidth of 3.6 kHz is significantly better than typically obtained by ultrafast fiber laser systems. We used a SESAM mode-locked Er:Yb:glass laser generating 170-fs pulses at a 75MHz pulse repetition rate with 110-mW average power. It is pumped by one standard telecom-grade 980-nm diode consuming less than 1.5W of electrical power. Without any further pulse compression and amplification, a coherent octave-spanning frequency comb is generated in a polarization-maintaining highly-nonlinear fiber (PM-HNLF). The fiber length was optimized to yield a strong CEO frequency beat signal between the outer Raman soliton and the spectral peak of the dispersive wave within the supercontinuum. The polarization-maintaining property of the supercontinuum fiber was crucial; comparable octave-spanning supercontinua from two non-PM fibers showed higher intensity noise and poor coherence. Astable CEO-beat was observed even with pulse durations above 200fs. Achieving a strong CEO frequency signal from relatively long pulses with moderate power levels substantially relaxes the demands on the driving laser, which is particularly important for novel gigahertz diode-pumped solid-state and semiconductor laser
Recommended from our members
Principles for developing benchmark criteria for staff training in responsible gambling
One approach to minimizing the negative consequences of excessive gambling is staff training to reduce the rate of the development of new cases of harm or disorder within their customers. The primary goal of the present study was to assess suitable benchmark criteria for the training of gambling employees at casinos and lottery retailers. The study utilised the Delphi Method, a survey with one qualitative and two quantitative phases. A total of 21 invited international experts in the responsible gambling field participated in all three phases. A total of 75 performance indicators were outlined and assigned to six categories: (1) criteria of content, (2) modelling, (3) qualification of trainer, (4) framework conditions, (5) sustainability and (6) statistical indicators. Nine of the 75 indicators were rated as very important by 90 % or more of the experts. Unanimous support for importance was given to indicators such as (1) comprehensibility and (2) concrete action-guidance for handling with problem gamblers, Additionally, the study examined the implementation of benchmarking, when it should be conducted, and who should be responsible. Results indicated that benchmarking should be conducted every 1â2 years regularly and that one institution should be clearly defined and primarily responsible for benchmarking. The results of the present study provide the basis for developing a benchmarking for staff training in responsible gambling
Picosecond diode-pumped 1.5 ÎŒm Er,Yb:glass lasers operating at10-100 GHz repetition rate
Stable ultrafast laser sources at multi-GHz repetition rates are important for various application areas, such as optical sampling, frequency comb metrology, or advanced high-speed return-to-zero telecom systems. We review SESAM-mode-locked Er,Yb:glass lasers operating in the 1.5ÎŒm spectral region at multi-GHz repetition rates, discussing the key improvements that have enabled increasing the repetition rate up to 100GHz. We also present further improved results with shorter pulse durations from a 100GHz Er,Yb:glass laser. With an improved SESAM design we achieved 1.1ps pulses with up to 30mW average output power. Moreover, we discuss for the first time the importance of beam quality deteriorations arising from frequency-degenerate higher order spatial modes in such laser
Virtual Electrode Design for Lithium-Ion Battery Cathodes
Microstructural characteristics of lithiumâion battery cathodes determine their performance. Thus, modern simulation tools are increasingly important for the custom design of multiphase cathodes. This work presents a new method for generating virtual, yet realistic cathode microstructures. A precondition is a 3D template of a commercial cathode, reconstructed via focused ion beam/scanning electron microscopy (FIB/SEM) tomography and appropriate algorithms. The characteristically shaped micrometerâsized active material (AM) particles and agglomerates of nanoâsized carbonâbinder (CB) particles are individually extracted from the voxelâbased templates. Thereby, a library of roughly 1100âAM particles and 20 CB agglomerates is created. Next, a virtual cathode microstructure is predefined, and representative sets of AM particles and CB agglomerates are built. The following reâassembly of AM particles within a predefined volume box works using dropping and rolling algorithms. Thereby, one can generate cathodes with specified characteristics, such as the volume fraction of AM, CB and pore space, particleâsize distributions, and gradients thereof. Naturally, such a virtual twin is a promising starting point for physicsâbased electrochemical performance models. The workflow from the commercial cathode microstructure through to a full virtual twin will be explained and assessed for a blend cathode made of the two AMs, LiNiCoAlO (NCA) and LiCoO (LCO)
The vascular bone marrow niche influences outcome in chronic myeloid leukemia via the E-selectin - SCL/TAL1-CD44 axis.
The endosteal bone marrow niche and vascular endothelial cells provide sanctuaries for leukemic cells. In murine chronic myeloid leukemia (CML) CD44 on leukemia cells and E-selectin on bone marrow endothelium are essential mediators for the engraftment of leukemic stem cells. We hypothesized that non-adhesion of CML-initiating cells to E-selectin on the bone marrow endothelium may lead to superior eradication of leukemic stem cells in CML after treatment with imatinib than imatinib alone. Indeed, here we show that treatment with the E-selectin inhibitor GMI-1271 in combination with imatinib prolongs survival of mice with CML via decreased contact time of leukemia cells with bone marrow endothelium. Non-adhesion of BCR-ABL1(+) cells leads to an increase of cell cycle progression and an increase of expression of the hematopoietic transcription factor and proto-oncogene Scl/Tal1 in leukemia-initiating cells. We implicate SCL/TAL1 as an indirect phosphorylation target of BCR-ABL1 and as a negative transcriptional regulator of CD44 expression. We show that increased SCL/TAL1 expression is associated with improved outcome in human CML. These data demonstrate the BCR-ABL1-specific, cell-intrinsic pathways leading to altered interactions with the vascular niche via the modulation of adhesion molecules - which could be exploited therapeutically in the future
- âŠ