197 research outputs found
Effiziente Erzeugung verschränkter Photonenpaare
Efficient Generation of Entangled Photon-Pairs
The first experiments with correlated photons have been performed in the context of
EPR-Bell experiments on the realistic and local properties of quantum mechanics. The
source used there produced pairs of polarization entangled photons from a 2-photon
decay of Calcium atoms. The technical requirements of these experiments were high
(vacuum systems, stronge dye-lasers, etc.) whereas the efficiency of the source was quite
low.
An important step forward was the introduction of spontaneous parametric down
conversion (SPDC), which has become the most common source in quantum optics for
generating correlated or entangled photon pairs. In this process photons of an intense
pump laser convert to photon pairs in an optical nonlinear crystal. Conservation of energy
and momentum leads to strong correlations between the generated photons. With this
kind of two-photon source it was possible to realize or improve many experiments on the
foundations of quantum mechanics addressing the EPR-Paradoxon and in the new field
of quantum information.
But again, more advanced experiments and applications suffer from the limited ef-
ficiency of the fluorescence process. Many photon pairs are lost by spatial and spectral
filtering, which is necessary to achieve polarization entanglement and long coherence times.
Different techniques have been implemented to increase the number of photon pairs
using two-crystal arrangements, focusing techniques or periodically poled crystals. Most
of these methods have the disadvantage that no entangled photons have been observed.
It is the aim of this work to increase the yield and to improve the mode definition
of entangled photon pairs generated by resonant enhancement of the pump mode and
the fluorescence modes. As a first step a linear cavity for the pump mode was realized.
Since the conversion probability is proportional to the pump power it was possible to
increase the photon pair count rate by factor of 7 over the previous source. Besides the
possibility of further improvement on already established pair correlation experiments,
such an enhancement allows to build a compact source for photon pairs, in which an
expensive argon-ion laser is replaced by a cheap diode laser. Among other applications
such sources are of strong interest for quantum cryptography.
3 In many quantum information experiments optical fibers are use to carry the photons
over long distance. Therefore, light from the parametric down-conversion source has to
be efficiently coupled into fibers. In the second part we report on a new method to
optimize collection efficiency by matching the angular distribution of the parametric
fluorescence to the spatial mode of an optical fiber. By using this technique, we detected
366500 polarization-entangled photon pairs per second in the near-infrared region in
single-mode optical fibers for 465 mW pump power (at 351.1 nm) with a 2 mm BBOcrystal.
The entanglement of the photon pairs was verified by measuring polarization
correlations of more than 96% in a HV-basis and in a ±45◦-basis. To our knowledge,
such enormous count rates of highly entangled photon pairs have not been reached yet
with any other technique.
In the third part of this thesis we investigated the process of parametric downconversion
in a cavity which is resonant to certain longitudinal down-conversion modes
only. The idea of placing the parametric down-conversion source inside a cavity is not
new. Such a device is usually referred to as a single or double resonant optical parametric
oscillator (OPO) and is mainly used to generate squeezed quantum states. In
that kind of application the system is operating close to but still under the threshold of
oscillation. In our application the situation is quite different. The system is operating far
below threshold so that mainly spontaneous emission occurs. In that mode correlations
between single photons can still be observed. But bouncing the light back and forth
inside the cavity increases the interaction length and hence enhances the signal levels
of the down-conversion fields. Further, by resonating two certain modes only, the bandwidth
is reduced by orders of magnitude and the coherence time is found to be inverse
proportional to the bandwidth. A similar experiment has already been realized with a
type-I parametric down-converter in the resonator. We have tried to realize a compact
double resonant OPO far below threshold with a type-II parametric down-converter in
a high-finesse cavity to realize a bright source of entangled photon pairs with extremely
narrow bandwidth
Fluid and gyrokinetic modelling of particle transport in plasmas with hollow density profiles
Hollow density profiles occur in connection with pellet fuelling and L to H transitions. A positive density gradient could potentially stabilize the turbulence or change the relation between convective and diffusive fluxes, thereby reducing the turbulent transport of particles towards the center, making the fuelling scheme inefficient. In the present work, the particle transport driven by ITG/TE mode turbulence in regions of hollow density profiles is studied by fluid as well as gyrokinetic simulations. The fluid model used, an extended version of the Weiland transport model, Extended Drift Wave Model (EDWM), incorporates an arbitrary number of ion species in a multi-fluid description, and an extended wavelength spectrum. The fluid model, which is fast and hence suitable for use in predictive simulations, is compared to gyrokinetic simulations using the code GENE. Typical tokamak parameters are used based on the Cyclone Base Case. Parameter scans in key plasma parameters like plasma β, R/LT , and magnetic shear are investigated. It is found that β in particular has a stabilizing effect in the negative R/Ln region, both nonlinear GENE and EDWM show a decrease in inward flux for negative R/Ln and a change of direction from inward to outward for positive R/Ln . This might have serious consequences for pellet fuelling of high β plasmas
Interaction between neoclassical effects and ion temperature gradient turbulence in gradient- and flux-driven gyrokinetic simulations
Interaction between turbulence and neoclassical effects in global gyrokinetic simulations with GENE
Isotope dependence of energy, momentum and particle confinement in tokamaks
The isotope dependence of plasma transport will have a significant impact on the performance of future D-T experiments in JET and ITER and eventually on the fusion gain and economics of future reactors. In preparation for future D-T operation on JET, dedicated experiments and comprehensive transport analyses were performed in H, D and H-D mixed plasmas. The analysis of the data has demonstrated an unexpectedly strong and favourable dependence of the global confinement of energy, momentum and particles in ELMy H-mode plasmas on the atomic mass of the main ion species, the energy confinement time scaling as τE∼A0.5 (Maggi et al., Plasma Phys. Control. Fusion, vol. 60, 2018, 014045; JET Team, Nucl. Fusion, vol. 39, 1999, pp. 1227–1244), i.e. opposite to the expectations based only on local gyro-Bohm (GB) scaling, τE∼A−0.5 , and stronger than in the commonly used H-mode scaling for the energy confinement (Saibene et al., Nucl. Fusion, vol. 39, 1999, 1133; ITER Physics Basis, Nucl. Fusion, vol. 39, 1999, 2175). The scaling of momentum transport and particle confinement with isotope mass is very similar to that of energy transport. Nonlinear local GENE gyrokinetic analysis shows that the observed anti-GB heat flux is accounted for if collisions, E × B shear and plasma dilution with low-Z impurities (9Be) are included in the analysis (E and B are, respectively the electric and magnetic fields). For L-mode plasmas a weaker positive isotope scaling τE∼A0.14 has been found in JET (Maggi et al., Plasma Phys. Control. Fusion, vol. 60, 2018, 014045), similar to ITER97-L scaling (Kaye et al., Nucl. Fusion, vol. 37, 1997, 1303). Flux-driven quasi-linear gyrofluid calculations using JETTO-TGLF in L-mode show that local GB scaling is not followed when stiff transport (as is generally the case for ion temperature gradient modes) is combined with an imposed boundary condition taken from the experiment, in this case predicting no isotope dependence. A dimensionless identity plasma pair in hydrogen and deuterium L-mode plasmas has demonstrated scale invariance, confirming that core transport physics is governed, as expected, by the 4 dimensionless parameters ρ*, ν*, β, q (normalised ion Larmor radius, collisionality, plasma pressure and safety factor) consistently with global quasi-linear gyrokinetic TGLF calculations (Maggi et al., Nucl. Fusion, vol. 59, 2019, 076028). We compare findings in JET with those in different devices and discuss the possible reasons for the different isotope scalings reported from different devices. The diversity of observations suggests that the differences may result not only from differences affecting the core, e.g. heating schemes, but are to a large part due to differences in device-specific edge and wall conditions, pointing to the importance of better understanding and controlling pedestal and edge processes.EUROfusion Consortium grant agreement No 63305
Impact of fast ions on density peaking in JET: fluid and gyrokinetic modeling
The effect of fast ions on turbulent particle transport, driven by ion temperature gradient (ITG)/trapped electron mode turbulence, is studied. Two neutral beam injection (NBI) heated JET discharges in different regimes are analyzed at the radial position rho(t) = 0.6, one of them an L-mode and the other one an H-mode discharge. Results obtained from the computationally efficient fluid model EDWM and the gyro-fluid model TGLF are compared to linear and nonlinear gyrokinetic GENE simulations as well as the experimentally obtained density peaking. In these models, the fast ions are treated as a dynamic species with a Maxwellian background distribution. The dependence of the zero particle flux density gradient (peaking factor) on fast ion density, temperature and corresponding gradients, is investigated. The simulations show that the inclusion of a fast ion species has a stabilizing influence on the ITG mode and reduces the peaking of the main ion and electron density profiles in the absence of sources. The models mostly reproduce the experimentally obtained density peaking for the L-mode discharge whereas the H-mode density peaking is significantly underpredicted, indicating the importance of the NBI particle source for the H-mode density profile
Toward the use of temporary tattoo electrodes for impedancemetric respiration monitoring and other electrophysiological recordings on skin
The development of dry, ultra-conformable and unperceivable temporary tattoo electrodes (TTEs), based on the ink-jet printing of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) on top of commercially available temporary tattoo paper, has gained increasing attention as a new and promising technology for electrophysiological recordings on skin. In this work, we present a TTEs epidermal sensor for real time monitoring of respiration through transthoracic impedance measurements, exploiting a new design, based on the application of soft screen printed Ag ink and magnetic interlink, that guarantees a repositionable, long-term stable and robust interconnection of TTEs with external “docking” devices. The efficiency of the TTE and the proposed interconnection strategy under stretching (up to 10%) and over time (up to 96 h) has been verified on a dedicated experimental setup and on humans, fulfilling the proposed specific application of transthoracic impedance measurements. The proposed approach makes this technology suitable for large-scale production and suitable not only for the specific use case presented, but also for real time monitoring of different bio-electric signals, as demonstrated through specific proof of concept demonstrators
Impact of fast ions on density peaking in JET: fluid and gyrokinetic modeling
The effect of fast ions on turbulent particle transport, driven by ion temperature gradient (ITG)/
trapped electron mode turbulence, is studied. Two neutral beam injection (NBI) heated JET
discharges in different regimes are analyzed at the radial position ρt = 0.6, one of them an L-mode and the other one an H-mode discharge. Results obtained from the computationally efficient fluid model EDWM and the gyro-fluid model TGLF are compared to linear and nonlinear gyrokinetic GENE simulations as well as the experimentally obtained density peaking. In these models, the fast ions are treated as a dynamic species with a Maxwellian background distribution. The dependence of the zero particle flux density gradient (peaking factor) on fast ion density, temperature and corresponding gradients, is investigated. The simulations show that the inclusion of a fast ion species has a stabilizing influence on the ITG mode and reduces the peaking of the main ion and electron density profiles in the absence of sources. The models mostly reproduce the experimentally obtained density peaking for the L-mode discharge whereas the H-mode density peaking is significantly underpredicted, indicating the importance of the NBI particle source for the H-mode density profile.EURATOM 63305
Interpretative and predictive modelling of Joint European Torus collisionality scans
Transport modelling of Joint European Torus (JET) dimensionless collisionality scaling experiments in various operational scenarios is presented. Interpretative simulations at a fixed radial position are combined with predictive JETTO simulations of temperatures and densities, using the TGLF transport model. The model includes electromagnetic effects and collisions as well as (E)over-right-arrow x (b)over-right-arrow shear in Miller geometry. Focus is on particle transport and the role of the neutral beam injection (NBI) particle source for the density peaking. The experimental 3-point collisionality scans include L-mode, and H-mode (D and H and higher beta D plasma) plasmas in a total of 12 discharges. Experimental results presented in (Tala et al 2017 44th EPS Conf.) indicate that for the H-mode scans, the NBI particle source plays an important role for the density peaking, whereas for the L-mode scan, the influence of the particle source is small. In general, both the interpretative and predictive transport simulations support the experimental conclusions on the role of the NBI particle source for the 12 JET discharges.Peer reviewe
- …