856 research outputs found
Velocity correlations in dense granular flows
Velocity fluctuations of grains flowing down a rough inclined plane are
experimentally studied. The grains at the free surface exhibit fluctuating
motions, which are correlated over few grains diameters. The characteristic
correlation length is shown to depend on the inclination of the plane and not
on the thickness of the flowing layer. This result strongly supports the idea
that dense granular flows are controlled by a characteristic length larger than
the particle diameter
Granular flow down a rough inclined plane: transition between thin and thick piles
The rheology of granular particles in an inclined plane geometry is studied
using molecular dynamics simulations. The flow--no-flow boundary is determined
for piles of varying heights over a range of inclination angles . Three
angles determine the phase diagram: , the angle of repose, is the
angle at which a flowing system comes to rest; , the maximum angle
of stability, is the inclination required to induce flow in a static system;
and is the maximum angle for which stable, steady state flow is
observed. In the stable flow region , three
flow regimes can be distinguished that depend on how close is to
: i) : Bagnold rheology, characterized by a
mean particle velocity in the direction of flow that scales as
, for a pile of height , ii)
: the slow flow regime, characterized by a linear
velocity profile with depth, and iii) : avalanche flow
characterized by a slow underlying creep motion combined with occasional free
surface events and large energy fluctuations. We also probe the physics of the
initiation and cessation of flow. The results are compared to several recent
experimental studies on chute flows and suggest that differences between
measured velocity profiles in these experiments may simply be a consequence of
how far the system is from jamming.Comment: 19 pages, 14 figs, submitted to Physics of Fluid
Inter-hospital dissemination of glycopeptide-resistant Enterococcus faecalis in Brazil
The antimicrobial susceptibility patterns of 73 glycopeptide-resistant Enterococcus faecalis isolates from nine hospitals in Brazil were analysed by the disk diffusion method and Etests. Isolates were typed by pulsed-field gel electrophoresis (PFGE), and vancomycin resistance genes were detected by PCR. the isolates shared a single major PFGE pattern, with six subtypes, and all were positive for vanA. These results indicate the occurrence of inter-hospital dissemination of glycopeptide-resistant E. faecalis in São Paulo, and raise concerns about the rapid dissemination of this pathogen throughout Brazil.Universidade Federal de São Paulo, EPM, Lab Especial Microbiol, BR-04025010 São Paulo, BrazilUniversidade Federal de São Paulo, EPM, Lab Especial Microbiol, BR-04025010 São Paulo, BrazilWeb of Scienc
Statistics of the contact network in frictional and frictionless granular packings
Simulated granular packings with different particle friction coefficient mu
are examined. The distribution of the particle-particle and particle-wall
normal and tangential contact forces P(f) are computed and compared with
existing experimental data. Here f equivalent to F/F-bar is the contact force F
normalized by the average value F-bar. P(f) exhibits exponential-like decay at
large forces, a plateau/peak near f = 1, with additional features at forces
smaller than the average that depend on mu. Computations of the force-force
spatial distribution function and the contact point radial distribution
function indicate that correlations between forces are only weakly dependent on
friction and decay rapidly beyond approximately three particle diameters.
Distributions of the particle-particle contact angles show that the contact
network is not isotropic and only weakly dependent on friction. High
force-bearing structures, or force chains, do not play a dominant role in these
three dimensional, unloaded packings.Comment: 11 pages, 13 figures, submitted to PR
Proximity effect in ultrathin Pb/Ag multilayers within the Cooper limit
We report on transport and tunneling measurements performed on ultra-thin
Pb/Ag (strong coupled superconductor/normal metal) multilayers evaporated by
quench condensation. The critical temperature and energy gap of the
heterostructures oscillate with addition of each layer, demonstrating the
validity of the Cooper limit model in the case of multilayers. We observe
excellent agreement with a simple theory for samples with layer thickness
larger than 30\AA . Samples with single layers thinner than 30\AA deviate from
the Cooper limit theory. We suggest that this is due to the "inverse proximity
effect" where the normal metal electrons improve screening in the
superconducting ultrathin layer and thus enhance the critical temperature.Comment: 4 pages, 4 figure
A constitutive law for dense granular flows
A continuum description of granular flows would be of considerable help in
predicting natural geophysical hazards or in designing industrial processes.
However, the constitutive equations for dry granular flows, which govern how
the material moves under shear, are still a matter of debate. One difficulty is
that grains can behave like a solid (in a sand pile), a liquid (when poured
from a silo) or a gas (when strongly agitated). For the two extreme regimes,
constitutive equations have been proposed based on kinetic theory for
collisional rapid flows, and soil mechanics for slow plastic flows. However,
the intermediate dense regime, where the granular material flows like a liquid,
still lacks a unified view and has motivated many studies over the past decade.
The main characteristics of granular liquids are: a yield criterion (a critical
shear stress below which flow is not possible) and a complex dependence on
shear rate when flowing. In this sense, granular matter shares similarities
with classical visco-plastic fluids such as Bingham fluids. Here we propose a
new constitutive relation for dense granular flows, inspired by this analogy
and recent numerical and experimental work. We then test our three-dimensional
(3D) model through experiments on granular flows on a pile between rough
sidewalls, in which a complex 3D flow pattern develops. We show that, without
any fitting parameter, the model gives quantitative predictions for the flow
shape and velocity profiles. Our results support the idea that a simple
visco-plastic approach can quantitatively capture granular flow properties, and
could serve as a basic tool for modelling more complex flows in geophysical or
industrial applications.Comment: http://www.nature.com/nature/journal/v441/n7094/abs/nature04801.htm
Partially fluidized shear granular flows: Continuum theory and MD simulations
The continuum theory of partially fluidized shear granular flows is tested
and calibrated using two dimensional soft particle molecular dynamics
simulations. The theory is based on the relaxational dynamics of the order
parameter that describes the transition between static and flowing regimes of
granular material. We define the order parameter as a fraction of static
contacts among all contacts between particles. We also propose and verify by
direct simulations the constitutive relation based on the splitting of the
shear stress tensor into a``fluid part'' proportional to the strain rate
tensor, and a remaining ``solid part''. The ratio of these two parts is a
function of the order parameter. The rheology of the fluid component agrees
well with the kinetic theory of granular fluids even in the dense regime. Based
on the hysteretic bifurcation diagram for a thin shear granular layer obtained
in simulations, we construct the ``free energy'' for the order parameter. The
theory calibrated using numerical experiments with the thin granular layer is
applied to the surface-driven stationary two dimensional granular flows in a
thick granular layer under gravity.Comment: 20 pages, 19 figures, submitted to Phys. Rev.
The Role of Friction in Compaction and Segregation of Granular Materials
We investigate the role of friction in compaction and segregation of granular
materials by combining Edwards' thermodynamic hypothesis with a simple
mechanical model and mean-field based geometrical calculations. Systems of
single species with large friction coefficients are found to compact less.
Binary mixtures of grains differing in frictional properties are found to
segregate at high compactivities, in contrary to granular mixtures differing in
size, which segregate at low compactivities. A phase diagram for segregation
vs. friction coefficients of the two species is generated. Finally, the
characteristics of segregation are related directly to the volume fraction
without the explicit use of the yet unclear notion of compactivity.Comment: 9 pages, 6 figures, submitted to Phys. Rev.
Generic mechanism for generating a liquid-liquid phase transition
Recent experimental results indicate that phosphorus, a single-component
system, can have two liquid phases: a high-density liquid (HDL) and a
low-density liquid (LDL) phase. A first-order transition between two liquids of
different densities is consistent with experimental data for a variety of
materials, including single-component systems such as water, silica and carbon.
Molecular dynamics simulations of very specific models for supercooled water,
liquid carbon and supercooled silica, predict a LDL-HDL critical point, but a
coherent and general interpretation of the LDL-HDL transition is lacking. Here
we show that the presence of a LDL and a HDL can be directly related to an
interaction potential with an attractive part and two characteristic
short-range repulsive distances. This kind of interaction is common to other
single-component materials in the liquid state (in particular liquid metals),
and such potentials are often used to decribe systems that exhibit a density
anomaly. However, our results show that the LDL and HDL phases can occur in
systems with no density anomaly. Our results therefore present an experimental
challenge to uncover a liquid-liquid transition in systems like liquid metals,
regardless of the presence of the density anomaly.Comment: 5 pages, 3 ps Fig
- …