Caracterización térmica y química de fracciones de aceite de semilla de Syagrus romanzoffiana

The Jerivá (Syagrus romanzoffiana) kernel oil (JKO) has a pleasant coconut-like smell, with about 33% lauric acid and 28% oleic acid. The oil also contains bioactive compounds, such as phenolics, carotenoids, and tocopherols. JKO has a solid consistency at low temperatures, but has a low melting point and low solid content at room temperature. Thus, this work aimed to evaluate the thermal properties related to crystallization and fusion, as well as the chemical and oxidative characteristics of JKO fractions, olein and stearin, obtained from dry and solvent fractionation. In general, stearins had higher crystallization and melting temperatures, and higher solid fat content, unlike oleins, which may be associated with the concentration of high melting triglycerides in the stearins. No statistically significant difference was found for fatty acid profile or oxidative stability of the fractions. The type of fractionation influenced the chemical and thermal properties of JKO fractions. The solvent process promoted the most relevant differentiation of fractions. An olein was obtained with 7% less solid fat at 25 °C which remained visually liquid at 2 °C below the oil, as well as a stearin with 17% more solid fat at 25 °C which remained visually solid at 3 °C above the oil.El aceite de semilla de Jerivá (Syagrus romanzoffiana) (ASJ) tiene un agradable olor a coco, con aproximadamente un 33% de ácido láurico y un 28% de ácido oleico. Este aceite también contiene compuestos bioactivos, como fenólicos, carotenoides y tocoferoles. El ASJ tiene una consistencia sólida a baja temperatura, pero tiene un punto de fusión bajo y un contenido de sólidos bajo a temperatura ambiente. Este trabajo tuvo como objetivo evaluar las propiedades térmicas relacionadas con la cristalización y fusión, así como las características químicas y oxidativas de las fracciones de ASJ, oleína y estearina, obtenidas mediante fraccionamiento en seco y con solvente. En general, las estearinas tuvieron temperaturas de cristalización y fusión más altas y un mayor contenido de grasa sólida, a diferencia de las oleínas, esto puede estar asociado con la concentración de triglicéridos de alto punto de fusión en las estearinas. No se encontraron diferencias estadísticamente significativas para el perfil de ácidos grasos ni en la estabilidad oxidativa de las fracciones. El tipo de fraccionamiento influyó en las propiedades químicas y térmicas de las fracciones de ASJK. El proceso mediante solvente favoreció la diferenciación de fracciones más relevantes. Se obtuvo una oleína con 7% menos de grasa sólida a 25 °C que permaneció visualmente líquida a 2 °C por debajo del aceite, así como una estearina con 17% más de grasa sólida a 25 °C y que permaneció visualmente sólida a 3 °C por encima del aceite

Mechanical properties and cytotoxic evaluation of the Ti-3Nb-13Zr alloy

Ti-13Nb-13Zr is a new titanium alloy that was originally developed for medical implant applications. This alloy combines a low elastic modulus, high strength, excellent hot and cold workability, and superior corrosion resistance. Research on this alloy has shown that the mechanical properties can be controlled over a significant range through hot working, heat treatment and cold-working. The present study describes the mechanical properties and cytotoxic evaluation of the Ti-13Nb-13Zr alloy, which was produced by furnace arc melting in argon atmosphere. The elemental constituents were unalloyed Ti, Nb and Zr sheets. The obtained ingots, which initial diameter were about 15 mm, have undergone sequences of cold-working and heat treatments in order to achieve a final diameter of 6 mm. The tensile strength of Ti-13Nb-13Zr achieved 1270 MPa (cold-worked – 60% reduction in area) and 860 MPa after heat treatment (60% reduction in area + 1000 o C/1h + water quenched). The elastic module were 52 GPa and 60 GPa respectively. Furthermore, the toxic effect of this alloy on cells was evaluated by a cytotoxicity test, a quantitative method of colony suppression assay using Chinese Hamster Ovary (CHO) cultured cells in contact with diluted extracts of the biomaterials. The results showed that Ti-13Nb-13Zr alloy obtained by furnace arc melting isn’t cytotoxic.Peer Reviewe

Multipole Expansion for Relativistic Coulomb Excitation

We derive a general expression for the multipole expansion of the electro-magnetic interaction in relativistic heavy-ion collisions, which can be employed in higher-order dynamical calculations of Coulomb excitation. The interaction has diagonal as well as off-diagonal multipole components, associated with the intrinsic and relative coordinates of projectile and target. A simple truncation in the off-diagonal components gives excellent results in first-order perturbation theory for distant collisions and for beam energies up to 200 MeV/nucleon.Comment: 3 figures, Accepted for publication in Phys. Rev.

Wax Chemical and Morphological Investigation of Brazilian Crude Oils

The waxes in petroleum can precipitate and form unwanted gels and deposition when exposed to low temperatures. The idea of this chapter is to approach methods of quantification and physicochemical and morphological characterization of waxes and how this information can help in understanding this deposition. Information such as the quantity of waxes and the chemical structures in the oil is fundamental to predict the possible deposition and its ability to aggregate with other crystals. For example, the knowledge about the wax morphology may contribute to explain the nucleation and growth of the deposits. The polarized light microscopy, the most common technique to visualize wax crystals, and the bright-field microscopy, the most simple technique, able to show crystal details that have not been seen on the polarized light, was used

Cyclic carbonate synthesis from CO2and epoxides using zinc(II) complexes of arylhydrazones of β-diketones

Zinc(II) complexes of arylhydrazones of β-diketones (AHBD) were used for the first time as catalysts combined with tetrabutylammonium bromide (TBABr), in the coupling reaction between CO2 and epoxides. The influence of pressure and temperature on cyclic carbonate formation was investigated, as well as the catalytic activity toward different substrates (e.g. styrene oxide, propylene oxide and cyclohexene oxide). The molar ratio between metal complex and TBABr was determined for maximum catalytic activity

Evidence for eosinophil recruitment, leukotriene B4 production and mast cell hyperplasia following Toxocara canis infection in rats

It is well known that eosinophilia is a key pathogenetic component of toxocariasis. The objective of the present study was to determine if there is an association between peritoneal and blood eosinophil influx, mast cell hyperplasia and leukotriene B4 (LTB4) production after Toxocara canis infection. Oral inoculation of 56-day-old Wistar rats (N = 5-7 per group) with 1000 embryonated eggs containing third-stage (L3) T. canis larvae led to a robust accumulation of total leukocytes in blood beginning on day 3 and peaking on day 18, mainly characterized by eosinophils and accompanied by higher serum LTB4 levels. At that time, we also noted increased eosinophil numbers in the peritoneal cavity. In addition, we observed increased peritoneal mast cell number in the peritoneal cavity, which correlated with the time course of eosinophilia during toxocariasis. We also demonstrated that mast cell hyperplasia in the intestines and lungs began soon after the T. canis larvae migrated to these compartments, reaching maximal levels on day 24, which correlated with the complete elimination of the parasite. Therefore, mast cells appear to be involved in peritoneal and blood eosinophil infiltration through an LTB4-dependent mechanism following T. canis infection in rats. Our data also demonstrate a tight association between larval migratory stages and intestinal and pulmonary mast cell hyperplasia in the toxocariasis model

Breakup of the weakly bound 17F nucleus

The breakup of the radioactive 17F nucleus into a proton and 16O is studied for the reaction 17F + 208Pb --> p + 16O + 208Pb at 65 MeV/nucleon. The possibility of using this reaction as a test case for studying dynamical Coulomb reacceleration effects is assessed. It is shown that the reaction is dominated by elastic nuclear breakup (diffraction dissociation).Comment: 17 figures and 8 figure

Durability assessment of external thermal insulation composite systems in urban and maritime environments

External Thermal Insulation Composite Systems (ETICS) are multilayer solutions which provide an enhanced thermal performance to the building envelope. However, significant anomalies can be detected on ETICS facades, in some cases shortly after the application of these systems. This study intends to evaluate and compare the durability of six commercially available ETICS after two years of outdoor exposure at both urban and maritime conditions in Portugal. The systems were characterized by means of non-destructive testing (i.e., visual and microscopic assessment, water transport properties, thermal conductivity, surface roughness), thus allowing to evaluate the performance loss throughout natural aging. The bio-susceptibility and aesthetic properties (color and gloss) were also investigated. Results showed that the performance and durability of the complete system is significantly affected by the rendering system formulation. The lime-based specimens obtained the highest rate of mold development after one year of aging in a maritime environment, becoming considerably darker and with lower surface gloss. Fungal analysis of this darkish stained area indicated the presence of mold species of the genera Alternaria, Didymella, Cladosporium and Epicoccum, and yeasts of the genera Vishniacozyma and Cystobasidium. An increase of both capillary water absorption and water vapor permeability was also registered for the aged lime-based specimens. Acrylic-based systems obtained lower capillary water absorption after aging and greater dirt deposition on their surfaces, especially in urban conditions. These systems had also higher color variation and surface gloss decrease and slightly higher mold growth, when compared with those aged in a maritime environment. Finally, no mold growth was detected on the silicate-based specimens after two years of aging. However, these specimens obtained higher capillary water absorption and lower vapor permeability after aging, possibly leading to moisture accumulation within the system. Results contribute towards the development of ETICS with enhanced performance and durability.info:eu-repo/semantics/publishedVersio

Current-Density Functional Theory of the Response of Solids

The response of an extended periodic system to a homogeneous field (of wave-vector $q=0$) cannot be obtained from a $q=0$ time-dependent density functional theory (TDDFT) calculation, because the Runge-Gross theorem does not apply. Time-dependent {\em current}-density functional theory is needed and demonstrates that one key ingredient missing from TDDFT is the macroscopic current. In the low-frequency limit, in certain cases, density polarization functional theory is recovered and a formally exact expression for the polarization functional is given.Comment: 5 pages, accepted in PR