News Feature Bicara Karya

“Bicara Karya” as a news feature program created as a new show that can be a source of information and education about the creative industry in the city of Semarang. The program elevates creative industry activities from making, success story, to barriers that occur in a creative industry. Packed with a personal explanation of someone who has expertise in their fields, discussed with a light language but not leaving the essence. In the “Bicara Karya”, The program directors are technically responsible for programming programs both visualizing the manuscript and communicating what they see to the entire production crew (camera person, scriptwriter, voice over, editor, etc.) to realize quality and in accordance with the event's concept and producer's direction. . After going through the pre-production stage, the production process, post production, the work is shown on Cakra Semarang TV every week, starting from 25 April 2017 until 18 July 2017 every Tuesday at 18.00 WIB. Through this work, it is hoped that the public will get educational program to educate and increase the audience information about the creative industry in Semarang and add insight to the viewers. Through the television program "Biacara Karya" which aired on Cakra Semarang TV is a show that raised about the industry keratif, the program director has completed its duties to run for 13 episodes without re-run and certainly not leaving the essence to be conveyed by packing it into an educative and motivating program but not being patronizing

Sinusitis maxilar iatrogénica tras la colocación de implantes: a propósito de un caso

La perforación del suelo del seno maxilar y de las fosas nasales durante la colocación de implantes en las crestas alveolares situadas por debajo no es un hecho infrecuente. Pequeñas comunicacio-nes producidas durante el fresado para la preparación del lecho implantario cierran espontánea-mente, pero es un requisito indispensable para evitar futuras complicaciones que el implante que-de estable, si no deberá ser retirado. Presentamos el caso de una mujer de 54 años de edad que acude refiriendo cacosmia y halitosis permanentes y episodios esporádicos de dolor en la zona infraorbitaria derecha asociados a rino-rrea purulenta, que no ceden a la administración de distintos antibióticos. Las pruebas radiológicas muestran tres implantes dentales en el primer cuadrante sustituyendo a 1.2, 1.3 y 1.6: el primero perforando la fosa nasal, y el tercero con el extremo apical en el interior del seno maxilar derecho con una imagen radioopaca bien delimitada asociada. Confirmada la existencia de una comunicación bucosinusal de más de dos años de evolución, y establecida esta como la causa del cuadro de sinusitis maxilar crónica que la paciente padece, se determina como plan de tratamiento la extracción de los tres implantes y la reconstrucción del plano óseo mediante un injerto de hueso autólogo de mentón. Al retirar el implante en posición 1.6 se observa material de aspecto resinoso adherido a toda su superficie, con fines probablemente retentivos, y que habrá contribuido en gran medida a incre-mentar el proceso irritativo local. El defecto remanente es tan importante en este sector que se hace imposible anclar un injerto óseo en este área, por lo que se legra la mucosa sinusal enferma a su través, enviando muestra para su posterior análisis anatomopatológico, y se consigue el cierre primario mediante un injerto pediculado de la bola adiposa de Bichat. Los controles postoperato-rios fueron favorables consiguiendo de esta forma la remisión total de la sintomatología y la recu-peración completa

Tinjauan Yuridis Terhadap Keabsahan Tanda Tangan Elektronik Dalam Kontrak Elektronik (E-Contract) Sebagai Alat Bukti (Dalam Pandangan Pembaharuan Hukum Acara Perdata Indonesia)

Tanda tangan elektronik yang digunakan dalam dokumen elektronik, yang menggunakan jaringan elektronik, dapat menjamin keamanan suatu pesan informasi elektronik, yang menggunakan jaringan publik, karena tanda tangan elektronik dibuat berdasarkan teknologi kriptografi asimetris. Mengenai pembuktian dalam persidangan, terdapat perbedaan pendapat tentang kekuatan pembuktian dokumen elektronik yang ditandatangani dengan tanda tangan elektronik dari penelitian ini. Karena Peraturan Pemerintah mengenai Sertifikasi Elekronik dan Tanda Tangan Elektronik belum juga disahkan, maka dari itu sebaiknya pemerintah hendak melakaukan pengesahan terhadap peraturan tersebut sehingga ada aturan hukum lebih lanjut dari Undang-Undang Nomor 11 Tahun 2008. Setelah dikeluarkan Undang-Undang Nomor 11 Tahun 2008 tentang Informasi dan Transaksi Elektronik, terjadi pembaharuan atau revisi untuk Undang-undang tersebut yaitu Undang-Undang nomor 19 tahun 2016 yang didalamnya terdapat 7 poin perubahan. Dokumen elektronik yang telah ditandatangani dengan tanda tangan elektronik, mempunyai daya pembuktian yang sama dengan akta otentik yang dibuat oleh pejabat yang berwenang, namun perbedaan pendapat dari pihak para notaris adalah dokumen elektronik yang ditandatangani dengan tanda tangan elektronik hanya mempunyai kekuatan pembuktian dibawahtangan, karena tidak memenuhi syarat yaitu tidak menghadap langsung kepada pejabat yang berwenang yang merupakan syarat sebagai akta otentik

Nihongo Application For Android Mobile Phone

Japan is an interesting country in many aspects. Most people, especially those who first come to Japan face problems. The problems include the difference of language. Nihongo, is a unique language. It has special structure of the sentence. In this research we develop Nihongo application which has focus two focuses, i.e. to ease Indonesian to communicate in Japanese language, and give some short information about Japan. Fix and Code Software development model is used to develop the application. The Nihongo application has features Hiragana table, Katakana table, daily conversations in Bahasa, Romaji, and Nihongo translation, video about Japan, top cities in Japan with its attractions, tips about staying in Japan, more than 2.000 vocabularies in Bahasa, Romaji, and Nihongo translation, and short information about Nihongo application. The application can be installed at Android Froyo OS (2.2) or later. The application is tested on Smartfren Andromax i, Sony Experia Miro, Samsung Galaxy mini 2, Samsung Galaxy S2, Samsung Galaxy W, Sony Ericsson Mini Pro, and Samsung Galaxy Ace 2. The result of the test proves that the Nihongo application run well. Our surveys say that the application clearly gives useful information about Japan, and eases Indonesian to communicate, socialize, and live in Japan

Homogénéisation des signaux isotopiques, 18O et 3H, dans un système hydrologique de haute montagne : la Vallée d'Aoste (Italie)

L'analyse de l'origine et de la dynamique des écoulements souterrains dans l'aquifère du milieu alluvial de la plaine d'Aoste (Italie) a été menée en étudiant les teneurs isotopiques (18O et 3H) des eaux sur l'ensemble du système hydrologique. La démarche a consisté en un suivi isotopique des précipitations pluvio-neigeuses, des sources de versants, du réseau de surface et de l'aquifère alluvial, complété par des analyses ponctuelles concernant l'horizon superficiel des glaciers et les sous-écoulements glaciaires. Le signal d'entrée en 18O porté par les précipitations présente une grande variabilité liée au contexte orographique (effet d'écran) et climatique (pluie ou neige). Celle-ci est mise en évidence par les changements saisonniers du gradient 18O/altitude. En moyenne annuelle (1994), ce gradient établi en Vallée d'Aoste à partir de mesures sur les précipitations récoltées entre 300 et 3500 m d'altitude (sur huit stations) est de - 0.18 ± 0.02 ‰ pour 100 m, avec un écart-type (s) des valeurs de ± 4,8 ‰. L'ensemble des résultats en 18O montre au cours du cycle hydrologique, un amortissement à la fois important et progressif du signal d'entrée fourni par les précipitations. Cet amortissement, de l'ordre de 30 fois dans l'aquifère alluvial (sigma=± 0.15 ‰), est particulièrement sensible au niveau de la glace et des sous-écoulements glaciaires. En ce qui concerne les résultats en 3H, les teneurs mesurées dans les précipitations se révèlent être étroitement liées avec l'origine et la trajectoire des masses d'air humide. Par ailleurs, on note une bonne concordance entre les temps de séjour des eaux dans l'aquifère alluvial calculés à partir des valeurs en 18O et ceux fournis par le 3H.The hydrogeological study of the alluvial aquifer of the Aosta plain (Italy) is chosen as one of the most appropriate examples representative of the Italian-French-Swiss Alps. This study has been carried out using two environmental isotopes (18O and 3H) for groundwater samples taken from this aquifer in order to shed light on the origin of water and the hydrodynamic characteristics of the aquifer.The surface area of this aquifer is 70 km_ and mean elevation ranges between 400 and 700 m (asl). This surface area constitutes a part of the watershed area that amounts 2400 km_ with a mean elevation of 2200 m (asl). The watershed possesses several mountain peaks, Mt. Blanc, Mt. Cervin, Mt. Grand Paradis, the elevation of which rise to over 4000 m.The input signal, quantitative and qualitative as well, provided by the precipitation shows a wide variability linked to both orographic (screen effect) and climatic (rain or snow) influences. This variability is marked by differences in the 18O/altitude gradient, which is seasonally dependent. A unique and linear relation is observed during spring and summer ; in autumn and winter results show an important gradient up to 2000 m but a less important one for higher altitudes.The mean annual (1994) gradient of - 0.18 ± 0.02 ‰ for 100 m is determined in Aosta valley for altitudes between 300 and 3500 m, and the standard deviation (sigma) of the mean volume-weighted value for precipitation is ± 4.8 ‰. Furthermore, the 18O values measured in the alluvial aquifer have shown a very low dispersion (sigma=± 0.15 ‰), which corresponds to a buffering effect of a factor 30. These results evidenced, thus, an homogenization process within the different water bodies.To analyze this homogenization process, the different components of the hydrologic system have been studied, i.e. the monitoring of the springs and runoff waters, with complementary local measurements of the upper part of ice cores and the glacier underflows. Using standard deviations (sigma) as criteria for the homogenization process, one can see a large and progressive decrease along the hydrological cycle, with a special amplitude in ice cores and glacier underflows : precipitation (± 4.8 ‰), ice core (± 0.8 ‰), glacier underflow (± 0.10 ‰), spring (± 0.15 ‰), surface runoff network (± 0.3 ‰), alluvial aquifer (± 0.15 ‰).In ice cores, the different process : freezing and thawing, compression, and vapor / liquid / solid exchanges have caused the 18O homogenization. Dealing with the springs on the slopes of the valley, the preferential flow paths linked to the fracturation lead to a mixing of waters and hence to a very buffered outflow signal. The combined effect of all these explains the stability and the uniformity of the data found in the alluvial water body.As far as the 3H concentrations are concerned, the values measured are tightly linked with the origin and the transport of humid air masses. For closely spaced stations, a significant difference in the input signal has been correlated to various climatic influences. Using 3H data from the Thonon-les-Bains station (included in the WMO-IAEA observation network) as input, the calculated transit times of 2.5 to 7.5 years are very close to those calculated with 18O, i.e. 4 to 7 years

Uji Efektivitas Konsentrasi Spodoptera litura – Nuclear Polyhedrosis Virus (SlNPV) JTM 97C Formulasi Bubuk Terhadap Larva Spodoptera litura Fabricius (Lepidoptera: Noctuidae) Pada Tanaman Kedelai

Spodoptera litura (armyworm) is an important leaf pest that is polyphagic and has a broad range of hosts. Spodoptera litura is the main pest in soybean plants and can cause up to 50% damage and often results in decreased productivity and even crop failure. Spodoptera litura is widespread in areas with hot and humid climates from the subtropics to the tropics. S. litura pests attack cultivation plants in the vegetative and generative phases. The prospect of insect pathogens as a substitute for chemical insecticides is quite good in terms of their effectiveness and impact on the environment. Nuclear Polyhedrosis Virus (NPV) is one of the Baculoviridae viruses that infect the larval stage. Spodoptera litura Nuclear Polyhedrosis Virus (SlNPV) is a pathogenic virus that infects armyworms. SlNPV JTM 97C is an effective isolate in controlling larvae of Spodoptera litura. The larvae used in this study were larval instar 4, instar 5, and instar 6. The study was conducted using a Completely Randomized Design (CRD) with 6 treatments and 3 replications. The treatments consisted of controls, 1 g / l, 2g / l, 3 g / l, 4 g / l, and 5 g / l. Each treatment was applied to instar 4, instar 5 and 6 instar larvae. The results showed that SlNPV JTM 97C affected mortality, stopped eating and pupa formation of instar 4, instar 5 larvae, but did not affect instar 6 larvae. The younger the larval instar the higher the pathogenicity response

Strengthening of Wood-like Materials via Densification and Nanoparticle Intercalation

Recently, several chemical and physical treatments were developed to improve different properties of wood. Such treatments are applicable to many types of cellulose-based materials. Densification leads the group in terms of mechanical results and comprises a chemical treatment followed by a thermo-compression stage. First, chemicals selectively etch the matrix of lignin and hemicellulose. Then, thermo-compression increases the packing density of cellulose microfibrils boosting mechanical performance. In this paper, in comparison with the state-of-the-art for wood treatments we introduce an additional nano-reinforcemeent on densified giant reed to further improve the mechanical performance. The modified nanocomposite materials are stiffer, stronger, tougher and show higher fire resistance. After the addition of nanoparticles, no relevant structural modification is induced as they are located in the gaps between cellulose microfibrils. Their peculiar positioning could increase the interfacial adhesion energy and improve the stress transfer between cellulose microfibrils. The presented process stands as a viable solution to introduce nanoparticles as new functionalities into cellulose-based natural materials

Augmenting forearm crutches with wireless sensors for lower limb rehabilitation

Forearm crutches are frequently used in the rehabilitation of an injury to the lower limb. The recovery rate is improved if the patient correctly applies a certain fraction of their body weight (specified by a clinician) through the axis of the crutch, referred to as partial weight bearing (PWB). Incorrect weight bearing has been shown to result in an extended recovery period or even cause further damage to the limb. There is currently no minimally invasive tool for long-term monitoring of a patient's PWB in a home environment. This paper describes the research and development of an instrumented forearm crutch that has been developed to wirelessly and autonomously monitor a patient's weight bearing over the full period of their recovery, including its potential use in a home environment. A pair of standard forearm crutches are augmented with low-cost off-the-shelf wireless sensor nodes and electronic components to provide indicative measurements of the applied weight, crutch tilt and hand position on the grip. Data are wirelessly transmitted between crutches and to a remote computer (where they are processed and visualized in LabVIEW), and the patient receives biofeedback by means of an audible signal when they put too much or too little weight through the crutch. The initial results obtained highlight the capability of the instrumented crutch to support physiotherapists and patients in monitoring usage