Comparative study of 220 kV overhead transmission lines models subjected to lightning strike simulation by using electromagnetic and alternative transients program

Introduction. In high voltage networks intended for the transport of electrical energy, lightning can strike an electric line striking either a phase conductor, a pylon or a ground wire, causing significant overvoltage on the transmission lines classified as stresses the most dangerous for transformer stations and electro-energy systems in general. Modeling transmission lines becomes more complicated, if the frequency dependence of resistance and serial inductance due to the effect of lightning strike in the conductors and in the earth is considered. The difficulty increases the fact that the parameters of the line can be defined and calculated only in the frequency domain, while the simulation of transients is wanted to be in the time domain. Problem. Several models (J.R. Marti, Bergeron, nominal PI, Semlyen and Noda) exist for the modeling of transmission lines, the Electromagnetic Transients Program/Alternative Transient Program software (EMTP/ATPDraw) gives the possibility to choose between these models which is delicate due to the fact that we do not have experimental results to validate and justify the choice among the models available in the software. In this context, practical value: the overhead transport line OAT-El Hassi (220 kV) of the city of Sétif located in the north east of Algeria is used for the modeling of lightning strike by using the EMTP/ATPDraw software. Originality. A comparative study of the investigation of a lightning strike on an existing high voltage transmission line by different models of existing lines in the EMTP/ATPDraw software library of this software. Results. It was concluded that the choice of the model of the line is very important given the accuracy and quality of the curves of the voltage presented at the different calculation points. Вступ. У високовольтних мережах, призначених для передачі електроенергії, блискавка може вдарити по лінії електропередач, уразивши або фазний провід, опору, або заземлюючий провід, викликаючи значні перенапруги на лініях електропередач, визначені як загрози, найбільш небезпечні для трансформаторних підстанцій та електроенергетичних систем загалом. Моделювання ліній електропередач ускладнюється, якщо враховувати частотну залежність опору та послідовної індуктивності внаслідок дії удару блискавки у провідниках та землі. Складність підвищується тим, що параметри лінії можуть бути визначені і розраховані тільки в частотній області, в той час як моделювання перехідних процесів бажано проводити в часовій області. Проблема. Існує кілька моделей (J.R. Marti, Bergeron, номінальна П-подібна схема заміщення, Semlyen і Noda) для моделювання ліній електропередач, комп‘ютерна  програма електромагнітних перехідних процесів/альтернативна програма перехідних процесів EMTP/ATPDraw дає можливість вибирати між цими моделями, що є «тонким питанням» через те, що ми не маємо експериментальних результатів для перевірки та обґрунтування вибору серед моделей, доступних у програмному забезпеченні. У цьому контексті, практична цінність: для моделювання удару блискавки за допомогою програмного забезпечення EMTP/ATPDraw використана повітряна лінія електропередачі ОАТ-Ель-Хассі (220 кВ) міста Сетіф, розташованого на північному сході Алжиру. Оригінальність. Порівняльне дослідження вивчення удару блискавки на існуючій високовольтній лінії електропередач за різними моделями існуючих ліній у бібліотеці програм  EMTP/ATPDraw цього програмного забезпечення. Результати. Зроблено висновок, що вибір моделі лінії дуже важливий з урахуванням точності та якості кривих напруг, представлених у різних розрахункових точках.

A comparative study of maximum power point tracking techniques for a photovoltaic grid-connected system

Purpose. In recent years, the photovoltaic systems (PV) become popular due to several advantages among the renewable energy. Tracking maximum power point in PV systems is an important task and represents a challenging issue to increase their efficiency. Many different maximum power point tracking (MPPT) control methods have been proposed to adjust the peak power output and improve the generating efficiency of the PV system connected to the grid. Methods. This paper presents a Beta technique based MPPT controller to effectively track maximum power under all weather conditions. The effectiveness of this algorithm based MPPT is supplemented by a comparative study with incremental conductance (INC), particle swarm optimization (PSO), and fuzzy logic control (FLC). Results Faster MPPT, lower computational burden, and higher efficiency are the key contributions of the Beta based MPPT technique than the other three techniques.Мета. В останні роки фотоелектричні системи набули популярності завдяки низці переваг серед відновлюваних джерел енергії. Відстеження точки максимальної потужності у фотоелектричних системах є важливим завданням і складною проблемою для підвищення їх ефективності. Було запропоновано безліч різних методів керування відстеженням точки максимальної потужності (ВТМП) для регулювання пікової вихідної потужності та підвищення ефективності генерації фотоелектричної системи, підключеної до мережі. Методи. У цій статті представлений контролер ВТМП, заснований на бета-методі, для ефективного відстеження максимальної потужності за будь-яких погодних умов. Ефективність ВТМП на основі цього алгоритму доповнюється порівняльним дослідженням з інкрементною провідністю, оптимізацією рою частинок та нечітким логічним управлінням. Результати. Швидше ВТМП, менші витрати на обчислення та більша ефективність є ключовими перевагами методу ВТМП на основі бета-методу порівняно з трьома іншими методами

Modelling bispecific monoclonal antibody interaction with two cell membrane targets indicates the importance of surface diffusion

We have developed a mathematical framework for describing a bispecific monoclonal antibody interaction with two independent membrane-bound targets that are expressed on the same cell surface. The bispecific antibody in solution binds either of the two targets first, and then cross-links with the second one whilst on the cell surface, subject to rate-limiting lateral diffusion step within the lifetime of the monovalently engaged antibody-antigen complex. At experimental densities, only a small fraction of the free targets is expected to lie within the reach of the antibody binding sites at any time. Using ordinary differential equation and Monte Carlo simulation-based models, we validated this approach against an independently published anti-CD4/CD70 DuetMab experimental data set. As a result of dimensional reduction, the cell surface reaction is expected to be so rapid that, in agreement with the experimental data, no monovalently bound bispecific antibody binary complexes accumulate until cross-linking is complete. The dissociation of the bispecific antibody from the ternary cross-linked complex is expected to be significantly slower than that from either of the monovalently bound variants. We estimate that the effective affinity of the bivalently bound bispecific antibody is enhanced for about four orders of magnitude over that of the monovalently bound species. This avidity enhancement allows for the highly specific binding of anti-CD4/CD70 DuetMab to the cells that are positive for both target antigens over those that express only one or the other We suggest that the lateral diffusion of target antigens in the cell membrane also plays a key role in the avidity effect of natural antibodies and other bivalent ligands in their interactions with their respective cell surface receptors

Role of parenting style and parents’ education in positive youth development of adolescents

The main purpose of this research is to determine the role of parenting style and educational level of parents in Positive Youth Development (PYD). Data were obtained using a questionnaire method involving 496 adolescent students of national secondary schools in Selangor. The findings indicate that there is a significant difference between the means for different races in PYD. This study also revealed that authoritative parenting styles, uninvolved parenting styles, and fathers’ level of education are significantly correlated to PYD. The authoritative parenting style was found to be the most significant predictor of higher PYD. These findings suggest that adolescents with authoritative parents in Malaysia show higher PYD and accordingly, they contribute to self, others and community

Near-Nozzle Instabilities in Gasoline Direct Injection Sprays

Nozzle flow of multi-hole GDi injectors can lead to undesirable and uncontrolled spray instabilities. In this study, two different injectors were utilised in order to observe the near-nozzle spray using high magnification optics and a high speed camera; a symmetrical multi-hole injector and an asymmetric, stepped nozzle injector. It was found that the symmetric injector exhibited a number of different spray instabilities, including flapping of the spray cone from an individual nozzle, flapping across all nozzles and rapid flapping along a single spray axis. The typical time scale of the phenomena was in the order of a hundredth of a millisecond. On the other hand, the stepped nozzle injector was found to exhibit fewer spray structures associated with spray instability. The results also suggest the nozzle step plays an important role in the primary breakup of the spray and that most of this breakup occurs before the exit of the step

A Study of a Bi-Phasic Flow Problem in Porous Media

Abstract In this paper, we develop a simplified formulation of the hydrocarbon system used for the petroleum reservoirs simulation.This system is a simplified model which describes a two-phase flow (oil and gas) with a mass transfer in a porous medium, that leads to the fluid compressibility.this kind of flow is modelled by a system of parabolic degenerated non linear convection-diffusion equations.Under certrain hypothesis, such as validity of Darcy's law, incompressibility of the porous medium, compressibility of the fluids, mass transfer between the oil and the gas and negligible gravity, the global pressure is formulated.This formulation allows the establishment of theoretical results on the existence and uniquness of the solution. Mathematics Subject Classification: 76D07, 76M2

Flow characteristics of Newtonian and non-Newtonian fluids in a vessel stirred by a 60° pitched blade impeller

Mean and rms velocity characteristics of two Newtonian flows at Reynolds numbers of 12,800 (glycerin solution) and 48,000 (water) and of a non-Newtonian flow (0.2% CMC solution, at a power number similar to the Newtonian glycerin flow) in a mixing vessel stirred by a 60° pitched blade impeller have been measured by laser Doppler velocimetry (LDV). The velocity measurements, resolved over 360° and 1.08° of impeller rotation, showed that the mean flow of the two power number matched glycerin and CMC flows were similar to within 3% of the impeller tip velocity and the turbulence intensities generally lower in the CMC flow by up to 5% of the tip velocity. The calculated mean flow quantities showed similar discharge coefficient and pumping efficiency in all three flows and similar strain rate between the two power number matched glycerin and CMC flows; the strain rate of the higher Reynolds number Newtonian flow was found to be slightly higher. The energy balance around the impeller indicated that the CMC flow dissipated up to 9% more of the total input power and converted 7% less into the turbulence compared to the glycerin flow with the same power input which could lead to less effective mixing processes where the micro-mixing is important

We Choose to Call it 'Degenerative Cervical Myelopathy': Findings of AO Spine RECODE-DCM, an International and Multi-Stakeholder Partnership to Agree a Standard Unifying Term and Definition for a Disease

STUDY DESIGN Modified DELPHI Consensus Process. OBJECTIVE To agree a single unifying term and definition. Globally, cervical myelopathy caused by degenerative changes to the spine is known by over 11 different names. This inconsistency contributes to many clinical and research challenges, including a lack of awareness. METHOD AO Spine RECODE-DCM (Research objectives and Common Data Elements Degenerative Cervical Myelopathy). To determine the index term, a longlist of candidate terms and their rationale, was created using a literature review and interviews. This was shared with the community, to select their preferred terms (248 members (58%) including 149 (60%) surgeons, 45 (18%) other healthcare professionals and 54 (22%) People with DCM or their supporters) and finalized using a consensus meeting. To determine a definition, a medical definition framework was created using inductive thematic analysis of selected International Classification of Disease definitions. Separately, stakeholders submitted their suggested definition which also underwent inductive thematic analysis (317 members (76%), 190 (59%) surgeons, 62 (20%) other healthcare professionals and 72 (23%) persons living with DCM or their supporters). Using this definition framework, a working definition was created based on submitted content, and finalized using consensus meetings. RESULTS Degenerative Cervical Myelopathy was selected as the unifying term, defined in short, as a progressive spinal cord injury caused by narrowing of the cervical spinal canal. CONCLUSION A consistent term and definition can support education and research initiatives. This was selected using a structured and iterative methodology, which may serve as an exemplar for others in the future