600 research outputs found
Total scattering descriptions of local and cooperative distortions in the oxide spinel (Mg,Cu)Cr2O4 with dilute Jahn-Teller ions
The normal spinel oxide MgCr2O4 is cubic at room temperature while the normal
spinel CuCr2O4 is tetragonal as a consequence of the Jahn-Teller nature of Cu2+
on the tetrahedral sites. Despite different end-member structures, complete
solid solutions of Mg_{1-x}Cu_xCr2O4 can be prepared that display a first-order
structural transition with composition x = 0.43 at room temperature. Reverse
Monte Carlo analysis of total neutron scattering on data acquired between 300 K
and 15 K on samples with x = 0.10, 0.20, and 0.43 provides unbiased local and
average structure descriptions of the samples, including an understanding of
the transition from local Jahn-Teller distortions in the cubic phase to
cooperative distortions that result in a tetragonal structure. Distributions of
continuous symmetry measures help to understand and distinguish distorted and
undistorted coordination around the tetrahedral site in the solid solutions.
Magnetic exchange bias is observed in field-cooled hysteresis loops of samples
with dilute Cu2+ concentration and in samples with tetragonal--cubic phase
coexistence around 300 K.Comment: 10 pages, 14 figure
Comportamiento dieléctrico de materiales compuestos reforzados con Ground Tire Rubber (GTR)
La masiva fabricación de neumáticos y la dificultad para su eliminación o almacenamiento constituye un grave problema medioambiental. En la actualidad, se utilizan diversos métodos para el reciclaje de neumáticos, como la trituración mecánica, en la que se separa el caucho vulcanizado del acero y las fibras, utilizándose este caucho en numerosas aplicaciones como pavimentos, aislantes, calzados, etc.Con el presente estudio se pretende dar una nueva salida a los neumáticos fuera de uso (GTR), demostrándose su utilidad como dieléctricos. Para ello, se ha combinado GTR con policloruro de vinilo (PVC), obteniendo un material compuesto de matriz polimérica reforzado con GTR. Se ha caracterizado el comportamiento dieléctrico paralas diversas mezclas del PVC con GTR (desde el 0% al 70% de GTR), en un rango de temperaturas que varía desde los 30ºC hasta los 130ºC, y con unas frecuencias desde 1·10-2 Hz, hasta 1·107 Hz. Los ensayos eléctricos han permitido el análisis de la permitividad, la resistividad, el factor de pérdidas dieléctricas y los módulos de relajación (Arrhenius). Se ha comprobado como todas estas propiedades aumentan a bajas temperaturas (30ºC). Asimismo, también se observa que la evolución de estos parámetros varía significativamente en función de la frecuencia y la temperatura
Improved wear performance of ultra high molecular weight polyethylene coated with hydrogenated diamond like carbon
Hydrogenated diamond like carbon (DLCH) thin films were deposited on medical grade ultra high molecular weight polyethylene (UHMWPE) by radio frequency plasma enhanced chemical vapor deposition. The DLCH coating thicknesses ranged from 250 to 700. nm. The substrates were disks made of UHMWPEs typically used for soft components in artificial joints, namely virgin GUR 1050 and highly crosslinked (gamma irradiated in air to 100. kGy) UHMWPEs. Mechanical and tribological properties under bovine serum lubrication at body temperature were assessed on coated and uncoated polyethylenes by means of nano-hardness and ball-on-disk tests, respectively. Morphological features of the worn surfaces were obtained by confocal microscopy and scanning electron microscopy. This study confirms an increase in surface hardness and good wear resistance for coated materials after 24. h of sliding test compared to uncoated polyethylene. These results point out that to coat UHMWPE with DLCH films could be a potential method to reduce backside wear in total hip and knee arthroplasties.Ministerio de Ciencia y Educación MAT2006-12603- C02-01, CSD2008-0002
Efecto de pretratamientos desvulcanizantes y de aditivos en materiales compuestos con matriz de HDPE y neumáticos fuera de uso
La gestión de los neumáticos al final de su ciclo de vidaprecisa soluciones para potenciar su reutilización y reciclado.Un paso previo consiste en la pulverización de losneumáticos por parte de empresas especializadas. La incorporaciónde este granulado como refuerzo en matricestermoplásticas se ha propuesto como método de valorizacióndel polvo de neumático. Este sistema se ve limitadopor la incompatibilidad entre matriz y refuerzo. Recientemente,un nuevo polvo de neumático, denominado comercialmente “desvulcanizado” ha aparecido en el mercado.En este artículo se comparan materiales compuestosformulados con polvo de neumático desvulcanizado conlos obtenidos con el mismo material sin tratamiento enmatriz de polietileno de alta densidad. También se estudiael efecto de distintos métodos de mezclado, del uso deaditivos dispersantes y del tamaño de partícula
Time-Resolved Spin Torque Switching and Enhanced Damping in Py/Cu/Py Spin-Valve Nanopillars
We report time-resolved measurements of current-induced reversal of a free
magnetic layer in Py/Cu/Py elliptical nanopillars at temperatures T = 4.2 K to
160 K. Comparison of the data to Landau-Lifshitz-Gilbert macrospin simulations
of the free layer switching yields numerical values for the spin torque and the
Gilbert damping parameters as functions of T. The damping is strongly
T-dependent, which we attribute to the antiferromagnetic pinning behavior of a
thin permalloy oxide layer around the perimeter of the free layer. This
adventitious antiferromagnetic pinning layer can have a major impact on spin
torque phenomena.Comment: 5 pages, 4 figure
Asymmetric magnetization reversal in exchange-biased hysteresis loops
This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.Polarized neutron reflectometry is used to probe the in-plane projection of the net-magnetization vector M of polycrystalline Fe films exchange coupled to twinned (110) MnF2 or FeF2 antiferromagnetic (AF) layers. The magnetization reversal mechanism depends upon the orientation of the cooling field with respect to the twinned microstructure of the AF, and whether the applied field is increased to (or decreased from) a positive saturating field; i.e., the magnetization reversal is asymmetric. The reversal of the sample magnetization from one saturated state to the other occurs via either domain wall motion or magnetization rotation on opposite sides of the same hysteresis loop
Thermal energy storage with phase change materials in building envelopes
Els materials de canvi de fase (PCM) han estat considerats per a l’emmagatzematge tèrmic en edificis des de 1980. Amb la inclusió dels PCM en plaques de guix, guix, formigó o altres materials que s’utilitzen per a cobrir les parets, l’emmagatzematge
tèrmic pot ser part de les estructures fins i tot en edificis lleugers. Les noves tècniques de microencapsulació han obert
moltes possibilitats en aplicacions per a edificis. El treball que es presenta és el desenvolupament d’un formigó innovador
mesclat amb PCM microencapsulat, amb un punt de fusió de 26 oC i una entalpia de canvi de fase de 110 kJ/kg. El primer experiment va ser la inclusió del PCM microencapsulat dins del formigó i la construcció d’una caseta amb aquest nou formigó-PCM. Es va construir una segona caseta al costat de la primera amb les mateixes característiques i orientació però amb formigó convencional que serveix com a referència. Durant els
anys 2005 i 2006 es va analitzar el comportament d’ambdues casetes i més tard es va edificar un mur Trombe a la paret sud
de totes dues per investigar la seva influència durant la tardor i
l’hivern.Phase change materials (PCM) have been viable for thermal storage in buildings since before 1980. With the advent of gypsum board, plaster, concrete or other wall covering materials containing PCM, thermal storage can be part of the building
structure even for lightweight buildings. New microencapsulation techniques offer many possibilities in building applications.
The work we present here uses an innovative concrete that contains a commercial microencapsulated PCM with a melting
point of 26oC and a phase change enthalpy of 110 kJ/kg. First we introduced the microencapsulated PCM into the concrete,
and then we constructed a small house-sized cubicle from this new PCM-concrete. A second cubicle with the exact same characteristics and orientation, but built from standard concrete, was located next to the first as a reference system. We tested the behaviour of the cubicles in 2005 and 2006. Later, a
Trombe wall was added to the cubicles to study its effect during autumn and winter.The work was partially funded by the project ENE2005-
08256-C02-01/ALT (Ministerio de Educación y Ciencia). M.
Medrano would like to thank the Spanish Ministry of Education
and Science for his
Ramon y Cajal
research appointment
Two-stage magnetization reversal in exchange biased bilayers
MnF2/Fe bilayers exhibit asymmetric magnetization reversal that occurs by coherent rotation on one side of the loop and by nucleation and propagation of domain walls on the other side of the loop. Here, we show by polarized neutron reflectometry, magnetization, and magnetotransport measurements that for samples with good crystalline "quality" the rotation is a two-stage process, due to coherent rotation to a stable state perpendicular to the cooling field direction. The result is remarkably asymmetrically shaped hysteresis loops
- …