Wild edible fruit tree resources of Arunachal Pradesh, North East India

The paper reports on the survey of wild edible fruit trees covering 49 sites from 17 districts of Arunachal Pradesh, India. A total of 52 wild edible fruits species representing 33 families was reported, out of which 10 had medicinal uses. The highest number of wild edible fruits belonged to family Moraceae (9 spp.) followed by Anacardiaceae (4 spp.) and Actinidiaceae (3 spp.). More than half the fruits (66.67%) are available during the monsoon season, i.e. between June and October. Dilenia indica, Castanopsis indica, Canarium strictum, Terminalia citrina, Phoebe cooperiana, Phyllanthus emblica and Artocarpus intergifolia are the commonly traded fruits. This is perhaps the only extensive survey which has so far been carried out on wild edible fruit tree resources covering all the districts of Arunachal Pradesh. In the present era where there is global interest on bioresource documentation, this study is significant for securing intellectual property right and preventing biopiracy

A new transient method for determining soil hydraulic conductivity function

Instantaneous profile method (IPM) is a transient method for measuring a soil hydraulic conductivity function (SHCF), which relates soil hydraulic conductivity with suction. In the existing interpretation method of the IPM, boundary flux during testing must be known to integrate instantaneous profiles of water content for obtaining water flow rate. However, it is usually difficult and expensive to measure a boundary flux and if not known, assumptions that may not be easily justified (especially in the field condition) have to be made. In this study, a new method is proposed so that any boundary flux needs not to be measured, controlled or assumed during a test. The new method is evaluated through (i) hypothetical column tests using transient seepage analyses and (ii) five case studies. The new method is capable of determining a SHCF with good accuracy. Normalised root-mean-square deviation (NRMSD) for the old and new methods is less than 5% and 10%, respectively. The accuracy of the new method can be increased substantially (i.e., NRMSDThe accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author

Investigation of plant growth and transpiration-induced matric suction under mixed grass-tree conditions

Although evapotranspiration-induced matric suction for single species has been widely studied, little is known about how mixed-species planting would affect the plant growth and induced matric suction. This study aims to explore the effects of grass-tree interaction on their growth and induced matric suction during evapotranspiration (ET) and rainfalls. Field monitoring was carried out to measure matric suction responses in compacted soil that was vegetated with (i) single tree species, Schefflera heptaphylla and (ii) mixed species of the trees and a grass species, Cynodon dactylon. In each condition, three tree spacings (120, 180 and 240 mm) were planted. When tree spacing increased from 120 to 240 mm, the peak tree root area index (RAI, for fine roots with diameterThe accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author

Termoreverzibilni mukoadhezivni in situ hidrogel za oftalmičku primjenu: dizajniranje i optimizacija koristeći kombinaciju polimera

The purpose of the study was to develop an optimized thermoreversible in situ gelling ophthalmic drug delivery system based on Pluronic F 127, containing moxifloxacin hydrochloride as a model drug. A 32 full factorial design was employed with two polymers Pluronic F 68 and Gelrite as independent variables used in combination with Pluronic F 127. Gelation temperature, gel strength, bioadhesion force, viscosity and in vitro drug release after 1 and 10 h were selected as dependent variables. Pluronic F 68 loading with Pluronic F 127 was found to have a significant effect on gelation temperature of the formulation and to be of importance for gel formation at temperatures 3336 ºC. Gelrite loading showed a positive effect on bioadhesion force and gel strength and was also found helpful in controling the release rate of the drug. The quadratic mathematical model developed is applicable to predicting formulations with desired gelation temperature, gel strength, bioadhesion force and drug release properties.Cilj rada bio je razvoj i optimizacija termoreverzibilnog sustava za isporuku lijekova koji gelira in situ. Sustav je napravljen na bazi Pluronic F 127, a sadrži moksifloksacin hidroklorid kao modelni lijek. U radu je primjenjeno 32 potpuno faktorijsko dizajniranje s dva polimera, Pluronic F 68 i Gelrite kao nezavisnim varijablama koji su kombinirani s Pluronic F 127. Kao zavisne varijable odabrane su temperatura geliranja, čvrstoća gela, jačina bioadhezije, viskoznost i in vitro oslobađanje lijeka nakon 1 i 10 h. Pronađeno je da Pluronic F 68 u kombinaciji s Pluronic F 127 ima značajan učinak na temperaturu geliranja u rasponu od 33 do 36 C. S druge strane, Gelrite ima povoljan učinak na jačinu bioadhezije, čvrstoću gela i oslobađanje lijeka. Razvijen je kvadratni matematički model pomoću kojeg se može predvidjeti temperatura geliranja, čvrstoća gela, jačina bioadhezije i oslobađanje ljekovite tvari

Frustrated antiferromagnetic quantum spin chains for spin length S > 1

We investigate frustrated antiferromagnetic Heisenberg quantum spin chains at T=0 for S=3/2 and S=2 using the DMRG method. We localize disorder and Lifshitz points, confirming that quantum disorder points can be seen as quantum remnants of classical phase transitions. Both in the S=3/2 and the S=2 chain, we observe the disappearance of effectively free S=1/2 and S=1 end spins respectively. The frustrated spin chain is therefore a suitable system for clearly showing the existence of free end spins S'=[S/2] also in half-integer antiferromagnetic spin chains with S>1/2. We suggest that the first order transition found for S=1 in our previous work is present in all frustrated spin chains with S>1/2, characterized by the disappearance of effectively free end spins with S'=[S/2].Comment: 6 pages, 8 ps figures, uses RevTeX, submitted to PR

Failure in Internally Pressurized Bent Tubes

The analysis and modeling of tube-hydroformed components is more complicated than that employed for sheet-metal panels, due to the lengthier process sequence and variable strain path - from flat-rolled sheet to tube; from straight tube to bent tube; and from bent tube to hydroformed component. These additional process steps make it difficult to determine whether post mortem analyses of tube failure during hydroforming can, and should, be conducted with the same tools and databases as used for simple stampings. To provide a partial answer, the properties of commercially fabricated welded straight tubes were evaluated using a free-expansion internal pressure test and compared with those of free-expansion internal pressure tests on bent tubes. The results demonstrated that the behavior of the bent tube was consistent with the mechanical properties of the as-received tube, provided due notice was accorded to the complex strain history of the bent tube. However, due to the strain-path changes occurring at the failure location, conventional approaches for monitoring strain history would yield (apparently) anomalous results

Finite-temperature Fermi-edge singularity in tunneling studied using random telegraph signals

We show that random telegraph signals in metal-oxide-silicon transistors at millikelvin temperatures provide a powerful means of investigating tunneling between a two-dimensional electron gas and a single defect state. The tunneling rate shows a peak when the defect level lines up with the Fermi energy, in excellent agreement with theory of the Fermi-edge singularity at finite temperature. This theory also indicates that defect levels are the origin of the dissipative two-state systems observed previously in similar devices.Comment: 5 pages, REVTEX, 3 postscript figures included with epsfi

Low-energy properties and magnetization plateaus in a 2-leg mixed spin ladder

Using the density matrix renormalization group technique we investigate the low-energy properties and the magnetization plateau behavior in a 2-leg mixed spin ladder consisting of a spin-1/2 chain coupled with a spin-1 chain. The calculated results show that the system is in the same universality class as the spin-3/2 chain when the interchain coupling is strongly ferromagnetic, but the similarity between the two systems is less clear under other coupling conditions. We have identified two types of magnetization plateau phases. The calculation of the magnetization distribution on the spin-1/2 and the spin-1 chains on the ladder shows that one plateau phase is related to the partially magnetized valence-bond-solid state, and the other plateau state contains strongly coupled S=1 and s=1/2 spins on the rung.Comment: 6 pages with 8 eps figure