The Truth about Beethoven

n/

Reflections on Bayreuth

n/

Extremists versus the Rest

n/

Wind-tunnel Tests of a Model of a Wingless Fin-controlled Missile to Obtain Static Stability and Control Characteristics Through a Range of Mach Numbers from 0.5 to 0.88

An investigation at medium to high subsonic speeds has been conducted in the Langley low-turbulence pressure tunnel to determine the static stability and control characteristics and to measure the fin normal forces and moments for a model of a wingless fin-controlled missile. The data were obtained at Reynolds number of 2.1 x 10(6) based on the missile maximum diameter or 17.7 x 10(6) based on missile length; this Reynolds number was found to be large enough to avoid any large scale effects between the test and the expected flight Reynolds number. With the horizontal-fin deflection limited to a maximum of 6 degrees, longitudinally stable and trimmed flight could not be maintained beyond an angle of attack of 17 degrees for a Mach number of 0.88 and beyond 20 degrees for a Mach number of 0.50 for any center-of-gravity location without the use of some auxiliary stability or control device such as jet vanes. Mach number had no appreciable effect on the center-of-pressure positions and only a slight effect on neutral-point position. There was a shift in neutral-point position of about 1 caliber as the angle of attack was varied through the range for which the neutral point could be determined. Yawing the model to angles of sideslip up to 7 degrees had little effect on the longitudinal stability at angles of attack up to 15 degrees; however, above 15 degrees, the effect of sideslip was destabilizing. With the vertical fins at a plus-or-minus 6 degree roll deflection, the rolling moment caused by yawing the model at high angles of attack could be trimmed out up to angles of sideslip of 6.5 degrees and an angle of attack of 26 degrees for a Mach number of 0.50; this range of sideslip angles was reduced to 3 degrees at a Mach number of 0.88. The data indicated that, at lower angles of attack, the trim range extended to higher angles of sideslip. The total normal-force and hinge-moment coefficients for both horizontal fins were slightly nonlinear with both angle-of-attack and fin deflection. The effect of Mach number was to reduce the slopes of the hinge-moment coefficient with angle of attack and deflection angle. In general, the effort of increasing the sideslip angle was to reduce the values of the fin normal-force and hinge-moment coefficients

Brief Note Multiple Linear Regression Models Which More Closely Reflect Bayesian Concerns

Author Institution: Educational Foundations, The University of Akron; Guidance and Educational Psychology, Southern Illinois University; National Testing Service; Department of Psychology, University of Akro

Developing Novel Prognostic Biomarkers for Multivariate Fracture Risk Prediction Algorithms

Multivariate prediction algorithms such as FRAX® and QFracture Scores provide an opportunity for new prognostic biomarkers to be developed and incorporated, potentially leading to better fracture prediction. As more research is conducted into these novel biomarkers, a number of factors need to be considered for their successful development for inclusion in these algorithms. In this review, we describe two well-known multivariate prediction algorithms for osteoporosis fracture risk applicable to the UK population, FRAX and QFracture Scores, and comment on the current prognostic tools available for fracture risk; dual X-ray assessment, quantitative ultrasonography, and genomic/biochemical markers. We also highlight the factors that need to be considered in the development of new biomarkers. These factors include the requirement for prospective data, collected in new cohort studies or using archived samples; the need for adequate stability data to be provided; and the need for appropriate storage methods to be used when retrospective data are required. Area under the receiver operating characteristic curve measures have been found to have limited utility in assessing the impact of the addition of new risk factors on the predictive performance of multivariate algorithms. New performance evaluation measures, such as net reclassification index and integrated discrimination improvement, are increasingly important in the evaluation of the impact of the addition of new markers to multivariate algorithms, and these are also discussed. © Springer Science+Business Media, LLC 2012

Applications of SuDS Techniques in Harvesting Stormwater for Landscape Irrigation Purposes:Issues and Considerations

While urbanization and increasing population has put much pressure on natural drainage channels and resulted in increase in flooding, there is increased pressure on available water resources due to climate change, reduction in frequency of rainfall events and drought. The emergence of a sustainable drainage system (SuDS), also known as best management practice (BMP) and low impact development (LID), has changed the management strategy of drainage from conventional to sustainable. SuDS techniques seek to deliver the three cardinal paradigms of sustainable drainage: quantity, quality and amenity and as such, they can offer an additional benefit for applications such as landscape irrigation. Most SuDS techniques have the potential for water storage with minimal or no modifications required. This chapter, while covering the capabilities of SuDS systems, explores SuDS devices such as pervious pavements equipped with excess storage capacity, cisterns and tanks harvesting roofwater, infiltration systems aimed at supporting the growth of urban plants and green roofs with the potential to store water in order to maintain water demanding planting scheme even during dry periods. It also covers systems where SuDS is the main driver to device installation and address issues and considerations surrounding applications of such systems in water harvesting for irrigation